Questions for you wiring gurus..

[Javi802]

So theres this guy i know (yes im being serious, I'm trying to help someone. "some guy" isn't code for myself lol)

Anyways. He bought a WS lower harness for an sr20det with the impression it was for an s13, but it is in fact for an s14.

Im trying to figure out how and which connectors to swap.

Looking at wiring specialties install instructions, it appears that only two connectors need to be changed.

The Alternator Feed wire. And Starter Signal wire

Here are WS instructions

S13 http://site.wiringspecialties.com/Wh...ionHarness.pdf

And s14 http://site.wiringspecialties.com/cl...ionHarness.pdf

Can anybody confirm that I'm correct in my assumptions?

There is also an 8 pin BLACK connector on the s14 (in step 6)
But on the s13 its a green 8 pin connector that looks to only use 7 wires

And does anybody have a link to some pinouts of these connectors?

[Javi802]

Its an s13 sr20det into s14 chassis lower harness if thats makes a difference

[wiring specialties]

The connectors and terminals that are used are not interchangeable. You will have to modify the harness quite a bit. Best bet would be to sell that harness to someone on here, or return it to us if it is still uninstalled.

-Chris