2JZGTE Swapped S-Chassis thread - Page 220 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

supercompact · 03-11-2017, 06:41 AM

I'm having the dreaded starter click. I think I'm going to have to re-run my power wire. I may have run it to the alternator/fuse box first and then to the starter. I'm pretty sure that's what's causing it. Any thoughts?

Sent from my iPhone using Tapatalk

supercompact · 03-12-2017, 12:55 PM

Now I have the engine turning over, but I never hear the fuel pump prime with the ignition. I'm using a tweak'd harness. If I remove the supplied relay that was installed in the tweak'd harness, the fuel pump runs nonstop. Anybody experience anything like that?

Sent from my iPhone using Tapatalk

Black240Ct · 03-12-2017, 12:59 PM

Quote:

Originally Posted by supercompact

Now I have the engine turning over, but I never hear the fuel pump prime with the ignition. I'm using a tweak'd harness. If I remove the supplied relay that was installed in the tweak'd harness, the fuel pump runs nonstop. Anybody experience anything like that?

Sent from my iPhone using Tapatalk

on a harness i made and on my now wiring specialties harness. when the ignition is on the fuel pump is on. its not on a timer like oem KA or sr20

supercompact · 03-12-2017, 01:01 PM

Quote:

Originally Posted by Black240Ct

on a harness i made and on my now wiring specialties harness. when the ignition is on the fuel pump is on. its not on a timer like oem KA or sr20

What's strange though is that the fuel pump only comes on if I unplug the fuel pump relay. So far I've had a couple of issues with this tweak'd harness.

Sent from my iPhone using Tapatalk

ph1tnessjunk1e · 03-12-2017, 06:20 PM

Wow, there is some awesome information in this thread, thanks!!!

I've been trying to search and figure out but haven't found specific info, but what ecu do 2jz swapped s chassis run? Can you run the stock 2jz ecu or buy a piggy back/standalone?

Sent from my iPad using Tapatalk

supercompact · 03-12-2017, 06:21 PM

Quote:

Originally Posted by ph1tnessjunk1e

Wow, there is some awesome information in this thread, thanks!!!

I've been trying to search and figure out but haven't found specific info, but what ecu do 2jz swapped s chassis run? Can you run the stock 2jz ecu or buy a piggy back/standalone?

Sent from my iPad using Tapatalk

Either one works just fine as long as your wiring is good.

Sent from my iPhone using Tapatalk

Boostin_AWD · 03-12-2017, 06:42 PM

Stock engine, run a stock ECU. Modify engine run a piggy back or stand alone.

ph1tnessjunk1e · 03-12-2017, 07:04 PM

Awesome, thanks [emoji1360]

Sent from my iPhone using Tapatalk

Deepsouth · 03-13-2017, 07:50 PM

Hey guys I'm new the website and like to share my 240sx s13 2jzgte vvti project. Also want to ask a question. Looking for some electric cooling fans for my setup. Dual and high cfm. Any suggestions?

http://imgur.com/a/RlQrB

boatwright_doug · 03-15-2017, 04:10 PM

Ended up ordering the wrong coolant hoses (Mk4 heater core hoses), curious if I can utilize these in place of the stock s13 heater core hoses. They seem similar from photos but I don't have an s13 set in front of me.
Thanks

Sent from my SM-G930V using Tapatalk

Deepsouth · 03-17-2017, 08:37 PM

Before

My 240sx s13 2jzgte vvti

gtx3582r cd009 trans

How it sits now. Still working on getting the Koyo radiator to fit and seeing what will work best for the cooling fans. Plan on mounting intercooler, oil cooler and ps cooler this weekend.

Koguchi240jz · 03-30-2017, 02:26 PM

Just a quick question for anyone with some knowledge on mounts, I have both the orange sr20 poly mounts, and solid steel mounts, I'm shooting for around 600 hp and was just curious which would be better. I can post pictures of it matters which solid mounts I have. All my ducks (parts) are almost is a row and I'm hopping to have the first start up in 2 months. Motor and tranny should be in for good by the end of this month. Any input is appreciated

Koguchi240jz · 03-30-2017, 02:29 PM

I went with excessive engine mounts btw, just wondering which ones that go to the subframe

ph1tnessjunk1e · 03-30-2017, 03:01 PM

Quote:

Originally Posted by Deepsouth

How it sits now. Still working on getting the Koyo radiator to fit and seeing what will work best for the cooling fans. Plan on mounting intercooler, oil cooler and ps cooler this weekend.

Looks good! Where does that serial nine put your shifter?

Sent from my iPhone using Tapatalk

Mister.E · 03-31-2017, 08:51 PM

Were you tapping the water pump for a temp sensor?

corkscrew · 04-01-2017, 06:02 PM

In for shifter info also! Doing 2j vvti/cd009 on my girlfriends hatch.

h3rb · 04-04-2017, 01:38 AM

This is where my serial nine shifter ended up on my hatch

Sent from my iPhone using Tapatalk

RickS14 · 04-11-2017, 05:06 PM

Change of plan's. Sold the cd009.now I have a tick level 4 tr6060 with a t56 tail.

Sent from my iPhone using Tapatalk

ph1tnessjunk1e · 04-11-2017, 08:28 PM

Why the change from the CD009?

Sent from my iPhone using Tapatalk

RickS14 · 04-12-2017, 08:18 AM

Quote:

Originally Posted by ph1tnessjunk1e

Why the change from the CD009?

Sent from my iPhone using Tapatalk

I was gonna go auto. But I would have to change standalone,harness etc. so came across this at a good deal it has 0 miles. plus it rated at 900ft lbs of tq. Which it's proven.joel grannas runs this set up in his supra also.

Sent from my iPhone using Tapatalk

kkaleher · 04-17-2017, 01:54 PM

Speaking of... I have a 370z trans, suprastore r154 bellhousing adapter and clutch ready to go in but my CBF gen3 shifter I ordered in febuary is still not done. Although, im starting to wonder if I will ever see this shifter since ive messaged the guy 5 times in the last week and a half and got no response. Pretty awesome communication. Im about ready to file a claim through paypal and go with serialnine or gktech.

kkaleher · 04-17-2017, 01:57 PM

Anyone else have issues with CBF? The pre-order said they would be done early april and on ebay it shows the same thing still....

RickS14 · 04-17-2017, 04:38 PM

Serial nine shifters are shipping out this week. I had mine on order since December. But I went tr6060 now. I was told they revised it for improvements. I sold mine already tho.
I guy who bought mine is going through the same thing with CBF. So he cancelled his order.

Sent from my iPhone using Tapatalk

kkaleher · 04-18-2017, 10:27 AM

well damn, hope I hear something soon

kkaleher · 04-18-2017, 12:27 PM

the "everything CD999" thread also has a lot of shifter talk and people in the same boat with CBF

Nissansota240 · 04-18-2017, 02:06 PM

Quote:

Originally Posted by kkaleher

the "everything CD999" thread also has a lot of shifter talk and people in the same boat with CBF

I think I ordered two of the CBF shifters in the group buy last November or December, still waiting. But I have another month and a half before my car needs to be done, so fingers crossed I don't need to shell out for a 999 last minute.

kkaleher · 04-18-2017, 09:24 PM

So has anyone ever gotten their CBF shifter? Fml

BiG MiKE86 · 04-20-2017, 01:12 PM

Quote:

Originally Posted by RickS14

Change of plan's. Sold the cd009.now I have a tick level 4 tr6060 with a t56 tail.

Sent from my iPhone using Tapatalk

Shoulda sent me that CD009 for that POS R154 you sold me

Currently looking for a CD009

RickS14 · 04-20-2017, 02:36 PM

Quote:

Originally Posted by BiG MiKE86

Shoulda sent me that CD009 for that POS R154 you sold me

Currently looking for a CD009

:-(

Sent from my iPhone using Tapatalk

kkaleher · 04-26-2017, 12:11 PM

Time to get rid of the old r154 driveshaft. I have a new driveshaft on the way from shaftmasters, gotta say they are really nice people and excellent customer service.

Shaftmasters aluminum driveshaft up for sale: S13 2jz with 1990 supra R154 trans/1jz bell housing and r200vlsd diff, excessive engine and trans mounts used. Im looking for $250 its only a year old, new retails for $397.

03-13-2017, 07:50 PM	#6579
Deepsouth Join Date: May 2015 Location: LA Age: 37 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	Hey guys I'm new the website and like to share my 240sx s13 2jzgte vvti project. Also want to ask a question. Looking for some electric cooling fans for my setup. Dual and high cfm. Any suggestions? http://imgur.com/a/RlQrB Last edited by Deepsouth; 03-13-2017 at 07:51 PM.. Reason: added picture

03-31-2017, 08:51 PM	#6585
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 39 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	Were you tapping the water pump for a temp sensor? __________________ : @e_lemonation

04-17-2017, 01:54 PM	#6591
kkaleher Leaky Injector Join Date: May 2013 Location: Louisville Age: 41 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Speaking of... I have a 370z trans, suprastore r154 bellhousing adapter and clutch ready to go in but my CBF gen3 shifter I ordered in febuary is still not done. Although, im starting to wonder if I will ever see this shifter since ive messaged the guy 5 times in the last week and a half and got no response. Pretty awesome communication. Im about ready to file a claim through paypal and go with serialnine or gktech. __________________ S13- 2jz, 370z 6spd, PT6262 Nissan Master/GT-R Technician

04-17-2017, 01:57 PM	#6592
kkaleher Leaky Injector Join Date: May 2013 Location: Louisville Age: 41 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Anyone else have issues with CBF? The pre-order said they would be done early april and on ebay it shows the same thing still.... __________________ S13- 2jz, 370z 6spd, PT6262 Nissan Master/GT-R Technician

04-17-2017, 04:38 PM	#6593
RickS14 Zilvia Member Join Date: Oct 2012 Location: CLEVELAND Posts: 218 Trader Rating: (2) Feedback Score: 2 reviews	2JZGTE Swapped S-Chassis thread Serial nine shifters are shipping out this week. I had mine on order since December. But I went tr6060 now. I was told they revised it for improvements. I sold mine already tho. I guy who bought mine is going through the same thing with CBF. So he cancelled his order. Sent from my iPhone using Tapatalk

03-11-2017, 06:41 AM	#6571
supercompact Leaky Injector Join Date: Jul 2012 Location: Knoxville, TN Age: 47 Posts: 88 Trader Rating: (0) Feedback Score: 0 reviews	I'm having the dreaded starter click. I think I'm going to have to re-run my power wire. I may have run it to the alternator/fuse box first and then to the starter. I'm pretty sure that's what's causing it. Any thoughts? Sent from my iPhone using Tapatalk

03-12-2017, 12:55 PM	#6572
supercompact Leaky Injector Join Date: Jul 2012 Location: Knoxville, TN Age: 47 Posts: 88 Trader Rating: (0) Feedback Score: 0 reviews	Now I have the engine turning over, but I never hear the fuel pump prime with the ignition. I'm using a tweak'd harness. If I remove the supplied relay that was installed in the tweak'd harness, the fuel pump runs nonstop. Anybody experience anything like that? Sent from my iPhone using Tapatalk

03-12-2017, 06:20 PM	#6575
ph1tnessjunk1e Join Date: Jul 2016 Location: Columbus, OH Age: 37 Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Wow, there is some awesome information in this thread, thanks!!! I've been trying to search and figure out but haven't found specific info, but what ecu do 2jz swapped s chassis run? Can you run the stock 2jz ecu or buy a piggy back/standalone? Sent from my iPad using Tapatalk

03-12-2017, 06:42 PM	#6577
Boostin_AWD Join Date: Jul 2013 Location: Utah Age: 33 Posts: 12 Trader Rating: (2) Feedback Score: 2 reviews	Stock engine, run a stock ECU. Modify engine run a piggy back or stand alone.

03-12-2017, 07:04 PM	#6578
ph1tnessjunk1e Join Date: Jul 2016 Location: Columbus, OH Age: 37 Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Awesome, thanks [emoji1360] Sent from my iPhone using Tapatalk

03-15-2017, 04:10 PM	#6580
boatwright_doug Leaky Injector Join Date: Mar 2016 Location: US 302 Posts: 64 Trader Rating: (1) Feedback Score: 1 reviews	Ended up ordering the wrong coolant hoses (Mk4 heater core hoses), curious if I can utilize these in place of the stock s13 heater core hoses. They seem similar from photos but I don't have an s13 set in front of me. Thanks Sent from my SM-G930V using Tapatalk

03-17-2017, 08:37 PM	#6581
Deepsouth Join Date: May 2015 Location: LA Age: 37 Posts: 25 Trader Rating: (1) Feedback Score: 1 reviews	Before My 240sx s13 2jzgte vvti gtx3582r cd009 trans How it sits now. Still working on getting the Koyo radiator to fit and seeing what will work best for the cooling fans. Plan on mounting intercooler, oil cooler and ps cooler this weekend.

03-30-2017, 02:26 PM	#6582
Koguchi240jz Join Date: Oct 2015 Location: Hopeless Junction Age: 29 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Just a quick question for anyone with some knowledge on mounts, I have both the orange sr20 poly mounts, and solid steel mounts, I'm shooting for around 600 hp and was just curious which would be better. I can post pictures of it matters which solid mounts I have. All my ducks (parts) are almost is a row and I'm hopping to have the first start up in 2 months. Motor and tranny should be in for good by the end of this month. Any input is appreciated

03-30-2017, 02:29 PM	#6583
Koguchi240jz Join Date: Oct 2015 Location: Hopeless Junction Age: 29 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	I went with excessive engine mounts btw, just wondering which ones that go to the subframe

04-01-2017, 06:02 PM	#6586
corkscrew Zilvia Addict Join Date: Oct 2009 Location: Florida Posts: 690 Trader Rating: (5) Feedback Score: 5 reviews	In for shifter info also! Doing 2j vvti/cd009 on my girlfriends hatch.

04-04-2017, 01:38 AM	#6587
h3rb Zilvia Member Join Date: Aug 2004 Location: san jose,ca Posts: 267 Trader Rating: (1) Feedback Score: 1 reviews	This is where my serial nine shifter ended up on my hatch Sent from my iPhone using Tapatalk

04-11-2017, 05:06 PM	#6588
RickS14 Zilvia Member Join Date: Oct 2012 Location: CLEVELAND Posts: 218 Trader Rating: (2) Feedback Score: 2 reviews	Change of plan's. Sold the cd009.now I have a tick level 4 tr6060 with a t56 tail. Sent from my iPhone using Tapatalk

04-11-2017, 08:28 PM	#6589
ph1tnessjunk1e Join Date: Jul 2016 Location: Columbus, OH Age: 37 Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Why the change from the CD009? Sent from my iPhone using Tapatalk

04-18-2017, 10:27 AM	#6594
kkaleher Leaky Injector Join Date: May 2013 Location: Louisville Age: 41 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	well damn, hope I hear something soon __________________ S13- 2jz, 370z 6spd, PT6262 Nissan Master/GT-R Technician

04-18-2017, 12:27 PM	#6595
kkaleher Leaky Injector Join Date: May 2013 Location: Louisville Age: 41 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	the "everything CD999" thread also has a lot of shifter talk and people in the same boat with CBF __________________ S13- 2jz, 370z 6spd, PT6262 Nissan Master/GT-R Technician

04-18-2017, 09:24 PM	#6597
kkaleher Leaky Injector Join Date: May 2013 Location: Louisville Age: 41 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	So has anyone ever gotten their CBF shifter? Fml __________________ S13- 2jz, 370z 6spd, PT6262 Nissan Master/GT-R Technician

04-26-2017, 12:11 PM	#6600
kkaleher Leaky Injector Join Date: May 2013 Location: Louisville Age: 41 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Time to get rid of the old r154 driveshaft. I have a new driveshaft on the way from shaftmasters, gotta say they are really nice people and excellent customer service. Shaftmasters aluminum driveshaft up for sale: S13 2jz with 1990 supra R154 trans/1jz bell housing and r200vlsd diff, excessive engine and trans mounts used. Im looking for $250 its only a year old, new retails for $397. __________________ S13- 2jz, 370z 6spd, PT6262 Nissan Master/GT-R Technician