S13 HARNESS on S14 HEAD EGR ( Thanks)

[burn1496]

Hello guys, Hope y'all have a nice summer . Any way , Today I just finished swapping out the head of the 92 ka24de and put on a 95 ka24de head. I had mostly everything connected but I was confuse and can't find any thread about the EGR connector (EGR and canister control solenoid valve). Because on a s14 head there is only 1 connector for EGR, however on the s13 harness they have 2 connector for the EGR . One is for ( EGR and canister control solenoid valve) and the other one is for ( scv control solenoid valve) . So my question was, How can I make it work on the s13 harness ? I was planning to cut the Canister and egr control solenoid connector, and solder the s14 male connector to it. Please let me know thank you so much and have a good one!

[Hoffman5982]

I assume you put an s14 intake manifold on as well? If you have your old manifold just switch all the sensors and stuff over and you should be set. Or delete the egr stuff and have one less thing to worry about