Dorisha | Nagano | Kyusha | Shakotan Style Small Wheel Thread [PICS] - Page 100 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JustinChillenBallin · 11-20-2017, 11:27 AM

Nostrildamus · 11-28-2017, 08:25 PM

!Zar! · 12-02-2017, 01:11 PM

As much as I hate this style, that s13 looks dope.

jaysgottaredtop · 12-05-2017, 11:04 AM

Yo these are cool. Just came across them on Ebay, but the seller only offers them for local pickup. If any of you are from Missouri, you should buy em. They’d look great on a stock body s13. 15x8, 4.5” BS (which converts to 0 offset), and 5x114.3.

https://rover.ebay.com/rover/0/0/0?m...2F332473620328

potatomonkey99 · 12-05-2017, 04:03 PM

Quote:

Originally Posted by Nostrildamus

Does anyone know the wheel/tire specs? Looks fantastic.

Nostrildamus · 12-06-2017, 03:21 PM

Quote:

Originally Posted by potatomonkey99

Does anyone know the wheel/tire specs? Looks fantastic.

15x9 +0 195/50

Reece · 12-06-2017, 08:37 PM

Bricey · 12-07-2017, 06:34 AM

That is fucken yummy^^

Couple of shots from the Meihan layout my local track has started doing

Sent from my iPhone using Tapatalk

Sailor · 12-07-2017, 08:22 AM

Can't say much about the redonk-a-donk camber some of these cars show, but the meat and the rims are a +1 for me

nightmoves180 · 12-07-2017, 03:47 PM

that red coupe is heat

MamangSorbetero · 12-10-2017, 04:21 AM

For the shakotan look, would it be better for more poke and stretch? I feel once you start going pushing wheel fitment to the limits, you also start detracting away from actual vehicle handling. Would be a shame for such a sporty car.

ditchs14 · 12-12-2017, 08:13 AM

Gotta balance both. If you want your to handle correctly, this isn’t for you, unless you wanna spend money on making your suspension geometry correct.

LockOn! · 12-12-2017, 10:06 AM

Quote:

Originally Posted by MamangSorbetero

For the shakotan look, would it be better for more poke and stretch? I feel once you start going pushing wheel fitment to the limits, you also start detracting away from actual vehicle handling. Would be a shame for such a sporty car.

A little bit of both usually.

15x9 - 10.5

195-55
205-50 / 55 / 60

anything shorter then a 195-55 and your either have wheel gap or your frame perpetually touching the ground.
anything taller then a 205-60 (and it better be on at least a 10" wide) looks like a monster truck.

offset depending on fenders, camber, tire profile etc.

www.willtheyfit.com

^
is really good for approximating tire profiles and sizes against what your riding on right now. Its pretty much inexcusable to end up with shit fitment if you have access to the internet lol.

MamangSorbetero · 12-14-2017, 10:21 AM

Quote:

Originally Posted by LockOn!

Its pretty much inexcusable to end up with shit fitment if you have access to the internet lol.

The style goes way back and I guess varies depending on their local region or just their preference. But I have noticed most of their wheel offsets are flush to the fender.

JDM_Hubert · 01-18-2018, 05:58 PM

16in Rs Watanabe R-Type on zn6 chassis, unfortunately not an schassis or a Nissan. I hope I’m not braking any rules

Current look

Before

Sent from my iPhone using Tapatalk

ditchs14 · 01-18-2018, 07:30 PM

My man! Always a fan of this car!

JDM_Hubert · 01-18-2018, 08:01 PM

Quote:

Originally Posted by ditchs14

My man! Always a fan of this car!

Thanks homie, I see your cool s14 is gracing the pages of this thread haha

Sent from my iPhone using Tapatalk

driftsucky · 01-20-2018, 07:15 AM

Quote:

Originally Posted by JDM_Hubert

littered with awesomeness

Sent from my iPhone using Tapatalk

Do you have an instagram. I need to stalk your li...uhhh...see more of your car.

JDM_Hubert · 01-20-2018, 12:38 PM

Quote:

Originally Posted by driftsucky

Do you have an instagram. I need to stalk your li...uhhh...see more of your car.

Ahaha stalk away dude, my ig is iamhubert

Sent from my iPhone using Tapatalk

kenta56 · 01-22-2018, 03:56 PM

Really Beautiful zn6 , great parts !

What sizes tires(16") on wheels please?

smellslikecurry · 01-22-2018, 05:41 PM

If any one of my fellow dorisha buddies is looking for that wing, I have one stateside for sale.

jumpman2334 · 01-22-2018, 05:43 PM

its refreshing to see one of those without a rocket bunny kit (brz/86 chassis) on it, or something else that screams "hey look at me".

also, not sure if any of you care or follow him. But the stance nation guy is doing a dorisha build as well. IG is something like sn_elvis.

240KA · 01-22-2018, 10:19 PM

Quote:

Originally Posted by jumpman2334

its refreshing to see one of those without a rocket bunny kit (brz/86 chassis) on it, or something else that screams "hey look at me".

also, not sure if any of you care or follow him. But the stance nation guy is doing a dorisha build as well. IG is something like sn_elvis.

man i was just looking at that car the other day. do you know the specs on those wheels? i thought i looked all over, but i don't think i saw them posted.

jumpman2334 · 01-23-2018, 10:13 AM

look in the comments for clues. I am not sure if he will outright say it, but I found out so far he is on 15x9 and tire size is 195/50. I only looked for a minute, so I didn't see the offset.

if you can get guesstimation on the lip size im sure someone here could ball park the offset.

edit: I saw another post that says he has a neg offset. im going to assume he isn't going to want to provide offsets. I find it funny that some hold their wheel specs a secret, as if its a social security # or a secret family recipe.

TheRealSy90 · 01-23-2018, 10:22 AM

Man the missing pieces on the ZN6 bumper corners really bugs me.

JDM_Hubert · 01-23-2018, 11:07 AM

Quote:

Originally Posted by TheRealSy90

Man the missing pieces on the ZN6 bumper corners really bugs me.

Same but they keep popping off and I feel like loose corner lights swinging around looks worse. Poor factory design

Sent from my iPhone using Tapatalk

snorkelcoupe · 01-23-2018, 11:35 AM

Quote:

Originally Posted by jumpman2334

look in the comments for clues. I am not sure if he will outright say it, but I found out so far he is on 15x9 and tire size is 195/50. I only looked for a minute, so I didn't see the offset.

if you can get guesstimation on the lip size im sure someone here could ball park the offset.

edit: I saw another post that says he has a neg offset. im going to assume he isn't going to want to provide offsets. I find it funny that some hold their wheel specs a secret, as if its a social security # or a secret family recipe.

You saw me talking to him then haha
Ballpark I'd say they're like -5 or something. The quarters don't look like they've had much work done to them at all.
He's also running a decent amount of camber in the rear

TheRealSy90 · 01-23-2018, 01:19 PM

Quote:

Originally Posted by JDM_Hubert

Same but they keep popping off and I feel like loose corner lights swinging around looks worse. Poor factory design

Sent from my iPhone using Tapatalk

Hell super glue those bad boys in or something lol.

smellslikecurry · 01-23-2018, 02:03 PM

Quote:

Originally Posted by TheRealSy90

Hell super glue those bad boys in or something lol.

i think they need to come off to access a bolt that holds the bumper on.

evildead138 · 01-23-2018, 05:33 PM

Quote:

Originally Posted by ghoti

Tho 195/60R15s don't look bad when there little to fender gap

what are the wheel specs for this!? love it!

11-20-2017, 11:27 AM	#2971
JustinChillenBallin Leaky Injector Join Date: Apr 2009 Location: Connecticut Age: 32 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Last edited by JustinChillenBallin; 11-20-2017 at 01:26 PM..

12-02-2017, 01:11 PM	#2973
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	As much as I hate this style, that s13 looks dope. __________________

12-05-2017, 11:04 AM	#2974
jaysgottaredtop Zilvia Addict Join Date: Mar 2011 Location: Greensboro, NC Posts: 950 Trader Rating: (7) Feedback Score: 7 reviews	Yo these are cool. Just came across them on Ebay, but the seller only offers them for local pickup. If any of you are from Missouri, you should buy em. They’d look great on a stock body s13. 15x8, 4.5” BS (which converts to 0 offset), and 5x114.3. https://rover.ebay.com/rover/0/0/0?m...2F332473620328 __________________

01-18-2018, 05:58 PM	#2985
JDM_Hubert Join Date: Sep 2009 Location: Chicago Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Dorisha \| Nagano \| Kyusha \| Shakotan Style Small Wheel Thread [PICS] 16in Rs Watanabe R-Type on zn6 chassis, unfortunately not an schassis or a Nissan. I hope I’m not braking any rules Current look Before Sent from my iPhone using Tapatalk Last edited by JDM_Hubert; 01-18-2018 at 08:12 PM..

01-22-2018, 05:41 PM	#2991
smellslikecurry Post Whore! Join Date: May 2003 Location: bangladesh Age: 37 Posts: 4,590 Trader Rating: (33) Feedback Score: 33 reviews	If any one of my fellow dorisha buddies is looking for that wing, I have one stateside for sale. __________________

11-28-2017, 08:25 PM	#2972
Nostrildamus Leaky Injector Join Date: May 2016 Location: Hartford CT Posts: 97 Trader Rating: (2) Feedback Score: 2 reviews

12-07-2017, 06:34 AM	#2978
Bricey Join Date: Jul 2015 Location: Cheltenham Age: 28 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	That is fucken yummy^^ Couple of shots from the Meihan layout my local track has started doing Sent from my iPhone using Tapatalk

12-07-2017, 08:22 AM	#2979
Sailor Leaky Injector Join Date: Jul 2017 Location: 56308 Posts: 109 Trader Rating: (3) Feedback Score: 3 reviews	Can't say much about the redonk-a-donk camber some of these cars show, but the meat and the rims are a +1 for me

12-07-2017, 03:47 PM	#2980
nightmoves180 Join Date: Feb 2014 Location: Prince Edward Island, Canada Age: 28 Posts: 37 Trader Rating: (0) Feedback Score: 0 reviews	that red coupe is heat

12-10-2017, 04:21 AM	#2981
MamangSorbetero Zilvia Junkie Join Date: Jun 2012 Location: California Posts: 323 Trader Rating: (5) Feedback Score: 5 reviews	For the shakotan look, would it be better for more poke and stretch? I feel once you start going pushing wheel fitment to the limits, you also start detracting away from actual vehicle handling. Would be a shame for such a sporty car.

12-12-2017, 08:13 AM	#2982
ditchs14 Zilvia Junkie Join Date: Dec 2008 Location: seaford de Posts: 475 Trader Rating: (1) Feedback Score: 1 reviews	Gotta balance both. If you want your to handle correctly, this isn’t for you, unless you wanna spend money on making your suspension geometry correct.

01-18-2018, 07:30 PM	#2986
ditchs14 Zilvia Junkie Join Date: Dec 2008 Location: seaford de Posts: 475 Trader Rating: (1) Feedback Score: 1 reviews	My man! Always a fan of this car!

01-22-2018, 03:56 PM	#2990
kenta56 Join Date: Aug 2010 Location: france Posts: 19 Trader Rating: (0) Feedback Score: 0 reviews	Really Beautiful zn6 , great parts ! What sizes tires(16") on wheels please?

01-22-2018, 05:43 PM	#2992
jumpman2334 Zilvia FREAK! Join Date: Jan 2010 Location: SHOW ME WHAT YOU GOT Posts: 1,115 Trader Rating: (1) Feedback Score: 1 reviews	its refreshing to see one of those without a rocket bunny kit (brz/86 chassis) on it, or something else that screams "hey look at me". also, not sure if any of you care or follow him. But the stance nation guy is doing a dorisha build as well. IG is something like sn_elvis.

01-23-2018, 10:13 AM	#2994
jumpman2334 Zilvia FREAK! Join Date: Jan 2010 Location: SHOW ME WHAT YOU GOT Posts: 1,115 Trader Rating: (1) Feedback Score: 1 reviews	look in the comments for clues. I am not sure if he will outright say it, but I found out so far he is on 15x9 and tire size is 195/50. I only looked for a minute, so I didn't see the offset. if you can get guesstimation on the lip size im sure someone here could ball park the offset. edit: I saw another post that says he has a neg offset. im going to assume he isn't going to want to provide offsets. I find it funny that some hold their wheel specs a secret, as if its a social security # or a secret family recipe.