|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
02-23-2015, 08:22 PM | #1 |
Zilvia Addict
|
s14 rear lower ball joints?
Trying to find rear lower ball joints for s14. I can find fronts all day long but no parts store list rears. Can someone let me know what you use for rear s14 ball joints? Nissan has the front and rears listed as 2 different part #s. I don't want to use the front Moog 9820 I want to use the correct one that would fit.
|
Sponsored Links |
02-25-2015, 02:03 AM | #4 |
Post Whore!
|
I like to post this whenever ball joint threads come up
S13 Front Taper low diameter 15.8mm Taper High diameter 18mm Taper length 19.5mm Diameter where it presses in 41mm S13 Rear, R32 Rear Taper low diameter 15mm Taper High diameter 18.6mm Taper length 23mm Diameter where it presses in 38mm R32 Front. S14 F&R , S15 F&R Taper low diameter 15mm Taper High diameter 18.6mm Taper length 23mm Diameter where it presses in 41mm |
05-23-2016, 08:55 PM | #5 |
Leaky Injector
|
reviving this....
has this been confirmed?? i just did front lower ball joints on my s14 and now need to do the rears...been searching high and low for an answer to this and 99% of the threads on this subject end without a clear answer..... can anyone guarantee me that i can use the same ball joints that i used for the front in the rears without any problems???? i dont feel like pressing the old one out and finding out i cant press in the new one cause it doesnt fit...and then im stranded probbaly trying to press the old one back in if it isnt destroyed.. i seem to find the answer and then i find another thread that says they are slightly different.. im confused now help |
07-06-2016, 07:48 PM | #7 |
Leaky Injector
|
anyone know the part number would be for an autozone brand part?? i think its duralast ball joints...
just need a cross reference from moog to duralast if anyone knows off hand thanks |
Bookmarks |
|
|