SR20DET FM Intercooler No Bumper Cutting - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Solus Christus · 10-16-2016, 10:28 PM

Hey guys,

I have searched and looked at every intercooler thread in this sub-forum.

Besides trying to locate a JDM Blitz or ARC aftermarket side-mount intercooler, is there a smaller FMIC option that does not involve cutting the bumper/crash support or bumper itself on an S13? (Not interested in a v-mount or top mount.)

I am really not concerned with making much power on my SR20 I just want to avoid heatsoak on the intercooler since I live in AZ and like to auto-X every now and then.

Thanks!

Wade

Solus Christus · 10-16-2016, 10:35 PM

I am wondering about this CXR intercooler kit, if it requires bumper cutting. I might call this company. I wonder about the included BOV though, if it's good quality...

I am going to be recirculating my BOV since I am keeping the stock MAF system.

http://www.ebay.com/itm/CXRacing-Fro...9T~sJp&vxp=mtr

jedi03 · 10-17-2016, 08:03 AM

get one that is not very tall...they should be able to mount below the bumper support, they do heat soak a little easier but should accomplish what you are looking for.

*brndck* · 10-17-2016, 08:21 AM

Quote:

Originally Posted by Solus Christus

I am wondering about this CXR intercooler kit, if it requires bumper cutting. I might call this company. I wonder about the included BOV though, if it's good quality...

I am going to be recirculating my BOV since I am keeping the stock MAF system.

http://www.ebay.com/itm/CXRacing-Fro...9T~sJp&vxp=mtr

cx racing is NOT quality. its pretty much the cheapest thing you can get.

it looks like you need to piece together a kit, look into spearco intercooler cores. they come in many different sizes and configurations

Solus Christus · 10-17-2016, 09:19 AM

Quote:

Originally Posted by brndck

cx racing is NOT quality. its pretty much the cheapest thing you can get.

it looks like you need to piece together a kit, look into spearco intercooler cores. they come in many different sizes and configurations

Thanks for the heads up! I will check into spearco. I guess most SR20 "bolt-on" kits are pretty big, so I will probably have to go universal and fit everything myself?

Anyone have an idea on dimensions on a core that will fit nicely?

Thanks!

KAT-PWR · 10-17-2016, 09:28 AM

Cooler and piping are okay, bov straight trash
You could source an s15 cooler

Solus Christus · 10-17-2016, 09:58 AM

Quote:

Originally Posted by KAT-PWR

Cooler and piping are okay, bov straight trash
You could source an s15 cooler

Thanks for the advice. Any idea on the dimension difference to an S13 SMIC?

Solus Christus · 10-23-2016, 11:37 PM

I found this universal Mishimoto intercooler 28 X 7.5 X 2.5 inches on FRS & Amazon.
http://www.frsport.com/Mishimoto-MMI...k_p_24024.html

Sources say this intercooler can handle 22psi of boost (I plan 10).

I wonder if this would fit with minimal bumper cutting on my Silvia?

When comparing the Blitz SE, Greddy LS, & ISR intercooler kits they all seem to be approximately 24 X 11 X 3 inches. And rates for upwards of 400HP which is far above what I'm shooting for, especially with a stock T25.

What do you think? Just need a 2.5 inch piping kit.

Thanks!

-Wade

10-16-2016, 10:28 PM	#1
Solus Christus Join Date: Oct 2016 Location: Herriman, UT Age: 37 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	SR20DET FM Intercooler No Bumper Cutting Hey guys, I have searched and looked at every intercooler thread in this sub-forum. Besides trying to locate a JDM Blitz or ARC aftermarket side-mount intercooler, is there a smaller FMIC option that does not involve cutting the bumper/crash support or bumper itself on an S13? (Not interested in a v-mount or top mount.) I am really not concerned with making much power on my SR20 I just want to avoid heatsoak on the intercooler since I live in AZ and like to auto-X every now and then. Thanks! Wade

10-17-2016, 09:28 AM	#6
KAT-PWR Nissanaholic! Join Date: Dec 2011 Location: US Posts: 2,040 Trader Rating: (11) Rides Gallery: KAT-PWR Feedback Score: 11 reviews	Cooler and piping are okay, bov straight trash You could source an s15 cooler __________________ MRP Manufacturing

10-16-2016, 10:35 PM	#2
Solus Christus Join Date: Oct 2016 Location: Herriman, UT Age: 37 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	I am wondering about this CXR intercooler kit, if it requires bumper cutting. I might call this company. I wonder about the included BOV though, if it's good quality... I am going to be recirculating my BOV since I am keeping the stock MAF system. http://www.ebay.com/itm/CXRacing-Fro...9T~sJp&vxp=mtr

10-17-2016, 08:03 AM	#3
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,836 Trader Rating: (8) Feedback Score: 8 reviews	get one that is not very tall...they should be able to mount below the bumper support, they do heat soak a little easier but should accomplish what you are looking for.

10-23-2016, 11:37 PM	#8
Solus Christus Join Date: Oct 2016 Location: Herriman, UT Age: 37 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	I found this universal Mishimoto intercooler 28 X 7.5 X 2.5 inches on FRS & Amazon. http://www.frsport.com/Mishimoto-MMI...k_p_24024.html Sources say this intercooler can handle 22psi of boost (I plan 10). I wonder if this would fit with minimal bumper cutting on my Silvia? When comparing the Blitz SE, Greddy LS, & ISR intercooler kits they all seem to be approximately 24 X 11 X 3 inches. And rates for upwards of 400HP which is far above what I'm shooting for, especially with a stock T25. What do you think? Just need a 2.5 inch piping kit. Thanks! -Wade