Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 01-16-2017, 02:47 PM   #1
kungfujoe
 
Join Date: Aug 2012
Location: Tacoma, WA
Age: 30
Posts: 2
Trader Rating: (0)
kungfujoe is an unknown quantity at this point
Feedback Score: 0 reviews
RB RB20 Crankshaft pulley out of alignment...backing out?

Something strange has happened to my RB20DET. It won't keep an alternator/water pump belt because they flip, then break. They are flipping because, while the water pump and alternator are at least visually in line with eachother, my crankshaft pulley seems to be working its way out of the engine. It is visually at least half an inch too far out.

The only thing I've done recently that might have caused this is that I put a big breaker bar on the crankshaft pulley nut in order to brace the engine while I torqued down the flywheel. While we were doing this, the nut broke loose. After we were done with the flywheel, we were sure to torque it down. A couple weeks later, this issue came to a head when I broke a belt. I put a new belt on (which appeared visually to be well out of alignment) and it flipped immediately.

Naturally, knowing nothing else about it, I assumed we had failed to fully secure that nut, so I put a 27 on, and gave it a good hard turn. With the transmission in gear (tried 1st and Reverse) and the handbrake on, I was still able to turn the engine a bit, which I thought was odd (my clutch is nearly brand new. Less than 1000 miles on it, and it's a 6-puck unsprung ACT, so it should be good to go). Basically I was getting stopped by the compression stroke on the engine. Furthermore, I don't feel like that nut went in at all and, despite the compression stroke, I must've been putting at least 100 lbs of torque on it (I think. I'm guessing. I really don't know, but it was a lot).

Anyway, is this the issue? This is so strange that I feel like it could be something else. I can see the rubber bit that I think is supposed to be hidden by the pulley (the harmonic balancer? I'm not 100% sure what it is), and it's almost perfectly aligned with where the belt should go.

Thoughts?
kungfujoe is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks

Tags
belts, crankshaft, rb20


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:23 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vB.Sponsors
Copyright © 1998 - 2015, Zilvia.net™