Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 01-14-2017, 10:44 AM   #1
Itsalexwoo
Leaky Injector
 
Itsalexwoo's Avatar
 
Join Date: Dec 2013
Location: Maryland
Posts: 51
Trader Rating: (0)
Itsalexwoo is an unknown quantity at this point
Feedback Score: 0 reviews
Dakota digital wireup post Z33 trans

I've got the converter and I'm looking to try and wire it up using the abs sensor on the dif. I'd really like to know if anyone else has done this successfully and could tell me how they wired it up.

Thank you
Itsalexwoo is offline   Reply With Quote
Sponsored Links
Old 01-14-2017, 12:54 PM   #2
tgd89
Leaky Injector
 
Join Date: Oct 2005
Location: abq nm
Posts: 123
Trader Rating: (0)
tgd89 is on a distinguished road
Feedback Score: 0 reviews
I don't have the box, but plan on doing this at some point. Here's an old FA thread on the s15 sensor which might be the same?
http://www.freshalloy.com/showthread...al-box-setting
tgd89 is offline   Reply With Quote
Old 01-18-2017, 11:00 AM   #3
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,410
Trader Rating: (35)
jr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond repute
Feedback Score: 35 reviews
Send a message via AIM to jr_ss
You'll need to figured out what signal wave the speed sensor generates to set the Dakota digital unit up. It's a pretty straightforward install. Wire sensor to the correct spots on the DD and run or splice into the factory speedo wiring. Sometimes speed sensors have polarity, so verify this beforehand to save a headache later.
__________________
*My SR20VET* Does your VTC gear rattle in your S14/15 SR? PM me.
jr_ss is offline   Reply With Quote
Old 01-18-2017, 12:42 PM   #4
Itsalexwoo
Leaky Injector
 
Itsalexwoo's Avatar
 
Join Date: Dec 2013
Location: Maryland
Posts: 51
Trader Rating: (0)
Itsalexwoo is an unknown quantity at this point
Feedback Score: 0 reviews
The problem is that the CD009 doesn't have a speed sensor like a the stock trans
Itsalexwoo is offline   Reply With Quote
Old 01-18-2017, 06:26 PM   #5
tgd89
Leaky Injector
 
Join Date: Oct 2005
Location: abq nm
Posts: 123
Trader Rating: (0)
tgd89 is on a distinguished road
Feedback Score: 0 reviews
Right.... which is why you mentioned you're going to try to use the ABS sensor which the dakota box can convert (probably).
tgd89 is offline   Reply With Quote
Old 02-20-2017, 03:49 PM   #6
Nismoboy1992
Leaky Injector
 
Join Date: Aug 2013
Location: Louisville
Posts: 118
Trader Rating: (3)
Nismoboy1992 is an unknown quantity at this point
Feedback Score: 3 reviews
Find which wire is the Vehicle speed sensor wire to the ecu. Wire the abs sensor from the diff to that wire. You didn't tell us what kind of vehicle that you're working on so we don't really know. But I'm assuming you had a ka/sr transmission, I'd think you would cut the speed sensor (the one on the trans with the plastic red gear) off and use those wires.. I'm going to be using the dakota digital as well for speedo and tach on my rb25 swapped z33 trans car. sgi8e and sgi5e.

You'll also have to get behind the dash and splice the convertor into the cluster wires. There should be instructions with the converter. Find a wiring diagram and it should be pretty straightforward
Nismoboy1992 is offline   Reply With Quote
Old 02-20-2017, 05:10 PM   #7
Itsalexwoo
Leaky Injector
 
Itsalexwoo's Avatar
 
Join Date: Dec 2013
Location: Maryland
Posts: 51
Trader Rating: (0)
Itsalexwoo is an unknown quantity at this point
Feedback Score: 0 reviews
Sorry it's all in a s13 and it's a change of plans I'm going to be running a q45 diff which doesn't have a abs sensor on the snout so I'm going with the use of a god speed sensor with a sgi5e converter.
Itsalexwoo is offline   Reply With Quote
Old 02-21-2017, 04:02 AM   #8
gaz_moose
Zilvia Member
 
Join Date: Mar 2008
Location: engerland
Posts: 242
Trader Rating: (0)
gaz_moose is an unknown quantity at this point
Feedback Score: 0 reviews
do you not have an abs sensor on the front wheels? when I wired a Dakota box up I ran it off the front so I could see the actual speed when drifting and not rear wheel speed.
gaz_moose is offline   Reply With Quote
Old 02-21-2017, 04:38 AM   #9
Itsalexwoo
Leaky Injector
 
Itsalexwoo's Avatar
 
Join Date: Dec 2013
Location: Maryland
Posts: 51
Trader Rating: (0)
Itsalexwoo is an unknown quantity at this point
Feedback Score: 0 reviews
No I had a non-abs s13 shell so I did not but that is a very good point and I might have to look into that
Itsalexwoo is offline   Reply With Quote
Old 02-21-2017, 06:46 AM   #10
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
God speed sensor? What's that.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 02-21-2017, 08:42 AM   #11
Itsalexwoo
Leaky Injector
 
Itsalexwoo's Avatar
 
Join Date: Dec 2013
Location: Maryland
Posts: 51
Trader Rating: (0)
Itsalexwoo is an unknown quantity at this point
Feedback Score: 0 reviews
Elaborate please?
Itsalexwoo is offline   Reply With Quote
Old 02-25-2017, 07:21 PM   #12
CraftHell
Zilvia Member
 
Join Date: Feb 2012
Location: Orlando, FL
Age: 35
Posts: 187
Trader Rating: (4)
CraftHell is an unknown quantity at this point
Feedback Score: 4 reviews
Is DD good? Ill have to use something similar when i get my vq35 swap installed in my s14
CraftHell is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:59 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net