S13 A/T EGR Tube - 14725-53f00 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TomShanK · 04-25-2018, 07:31 AM

Mornin' Zilvia,

Part: 14725-53f00

In the process of restoring my car back to original and the only remaining issue on my KA24DE is a cracked EGR Tube which is discontinued from Nissan.

I ordered the EGR Tube for the manual transmission anticipating it would be the same, but alas it is vastly different missing a bend or two and not having the correct 90 degree angle to the exhaust manifold.

Before I go cutting and splicing tubes to make something work, I'm hoping someone may have this part available.

Shipping to 46818.

blindside73 · 02-07-2019, 03:38 PM

Sorry resurrecting an old thread, but i couldn't find an answer.

I also sent OP a PM but thought it would be nice to make it public.

I need to order an EGR tube for smog but not sure which one to order. I tried to identify which parts are unique between MT and AT, other than the EGR tube but didn't find anything. My car was originally auto but i manual swapped it. I had to source a stock exhaust manifold to replace the headers the previous installed. I'm trying to identify which parts cause the different bends which dictate which EGR tube(MT OR AT) to use?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-07-2019, 03:38 PM	#2
blindside73 Join Date: May 2018 Location: San Diego Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	Sorry resurrecting an old thread, but i couldn't find an answer. I also sent OP a PM but thought it would be nice to make it public. I need to order an EGR tube for smog but not sure which one to order. I tried to identify which parts are unique between MT and AT, other than the EGR tube but didn't find anything. My car was originally auto but i manual swapped it. I had to source a stock exhaust manifold to replace the headers the previous installed. I'm trying to identify which parts cause the different bends which dictate which EGR tube(MT OR AT) to use?