|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
05-08-2014, 07:16 AM | #1 |
Join Date: Jul 2011
Location: eburg md
Age: 37
Posts: 6
Trader Rating: (0)
Feedback Score: 0 reviews
|
Transmission to bell housing bolts.
Whats up everyone, I bought a s14 trans for my project but it is missing the bolts that hold the transmission to the bell housing. I have done a good bit of searching and have been un able to find any info. Any help would be much appreciated! (s14 ka 5 speed trans)
|
Sponsored Links |
05-08-2014, 08:46 AM | #3 |
Leaky Injector
|
They are 14mil socket head with a "7" stamped on it. There are 4 different lengths. The shortest are on the 2 plates that tie the engine to the tranny on the bottom. There are 4 for each side. The next size up goes around to the left and top. The 2 for the starter are 2 different lengths. If the engine is in the car you will need a long extension a universal and 14mill socket. As you tighten the tyranny to the engine, periodically rotate the crank to make sure it isn't binding up.
|
05-08-2014, 09:11 AM | #6 |
Leaky Injector
|
Those are also stamped 7 and have 12 mill size socket heads. Unlike GM TRANYS the " manual bell housing is half of the Tranny.
|
05-08-2014, 09:31 AM | #10 |
AFC #1
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
Feedback Score: 3 reviews
|
Like The Saint mentioned above the front half of the case includes the bell-housing.
__________________
Comments should be taken as Opinions not as Statements of Fact |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|