Aem UEGO Install AEM EMS V2

[b4l]

ok guy's so im trying to install my wideband and well the color wires dont match up

On AEM EMS instruction page 4 of 13 shows a P/N 305130

My wideband is a P/N 304100

I need to hook up my blue wire from P/N 304100 to my ems and in the Aem ems instructions it say's the brown(analog-single) wire to pin 29

Hope I can just put the blue wire there.

[fliprayzin240sx]

Well the white wire is an analog 5v and the blue is to datalog. Is AEM gonna use the analog 5v to replace the stock o2 sensor?

[b4l]

on the wideband instructions

red 12

black chassis ground

white 0-5v output

blue serial output

on my aem ems instructions

white 0-5 v + signal pin 19

brown analong - signal ground pin 29

pink switched + 12 v power

red + 12v power 5a fuse

black battery or chassis ground

[b4l]

Originally Posted by fliprayzin240sx

Well the white wire is an analog 5v and the blue is to datalog. Is AEM gonna use the analog 5v to replace the stock o2 sensor?

Idk that's why I'm posting lol I'm thinking I just need the white one for sure and the blue to ummm blank lol that's what the fourms are for lol