|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
11-18-2013, 09:42 PM | #1 |
Join Date: Nov 2013
Location: San Diego
Age: 30
Posts: 37
Trader Rating: (0)
Feedback Score: 0 reviews
|
ka24e - Just replaced a bunch of stuff, now it cranks and wont start.
Specs
1990 240sx ka24e - pretty much all stock So I was driving two weeks ago and for some reason my water pump broke off which in turn released my fan on a spree of destroying some things. Things I had to fix/replace; Radiator CrankShaft pulley crankshaft seal Fan clutch Maf sensor pig tail had to be repaired Water Pump Maf sensor meter was replaced. I replaced everything tonight and tried starting it and it would crank and crank and crank and nothing. there was some pops from the engine bay but I think it was just from so much fuel sitting there while I cranked it. I am at a loss right now I have no idea what it could be. Theres one vacuum hose that got chopped but im sure it wouldnt be stopping the car from starting. |
Sponsored Links |
11-26-2013, 07:48 PM | #2 |
Nissanaholic!
Join Date: Feb 2012
Location: Oxnard, CA
Age: 30
Posts: 1,890
Trader Rating: (31)
Feedback Score: 31 reviews
|
Find out what vac line was chopped, also if your wiring was chopped remember you have a hot wire from the ecu in there, it could've contacted metal on the chassis and fried the pin on the ecu. Check it out. Also you could've just gotten a bad MAF
|
11-26-2013, 07:51 PM | #3 |
Join Date: Nov 2013
Location: San Diego
Age: 30
Posts: 37
Trader Rating: (0)
Feedback Score: 0 reviews
|
I got it running again... dumbest thing ever, I had a friend helping to put some stuff on and I guess he decided to move some soak plug wires lol
Sent from my SCH-I545 using Tapatalk |
Bookmarks |
|
|