Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Specific Topics > Archive and FAQs

Archive and FAQs Archives and Frequently Asked Questions about the 240SX are in here.


 
 
Thread Tools Display Modes
Old 02-05-2007, 05:54 PM   #1
yokotas13
Post Whore!
 
yokotas13's Avatar
 
Join Date: Apr 2006
Location: Milford, CT
Age: 39
Posts: 10,519
Trader Rating: (8)
yokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfectionyokotas13 is close to perfection
Feedback Score: 8 reviews
Send a message via AIM to yokotas13 Send a message via MSN to yokotas13 Send a message via Yahoo to yokotas13
FPR install on sr20 *Approved*

OK, to start out, we need a few things
Make sure you have suitable line to connect your FPR,
you do NOT NEED A RAIL ADAPTER IF YOU GET THE MEGAN

Just make sure you go to your local home store to get an Oring to fit in the gap on the adapter provided.
other than that, you should have everything that you need!


To start off this is what you are removing


there are 4 items to remove from this stock FPR
First off take off the line going to the nipple for the fuel


then take out the two screws holding the FPR to the rail


adn then take off the vacume reference hose....remeber which one this is


if you did get an adapter, swap the oring out to the adapter, if you didnt, put the oring you went and got to use with the included adapter and slap it on.



Now to install

connect the line that went to the stock FPR, to the input side of the FPR. then use the hose you got to go to the Fuel rail adapter (be it the megan included or another one) My Adapter is temp. installed because i was doing other stuff as well and needed to leak check it.

Make sure yuo adjust it to 3 bar to start with and go from there if you need to.
i made a bracket to go into an existing hole to mount the FPR right there. next to the oil filter relocatior.

hope it helps someone!
yokotas13 is offline  
Sponsored Links
Old 03-26-2007, 06:13 AM   #2
mrmephistopheles
Magnanimous Justice Distribution Service
 
mrmephistopheles's Avatar
 
Join Date: Mar 2002
Location: BFE
Age: 22
Posts: 14,364
Trader Rating: (9)
mrmephistopheles has disabled reputation
Feedback Score: 9 reviews
Approved

Spellcheck, STAT.
__________________
Quote:
Originally Posted by PHLIP
just a sec, embarrassing someone
mrmephistopheles is offline  
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net