FL F/S Full 2JZGTE Engine w/Built Head, Powerglide Tranny For 2J & MUCH MORE!!

[NEMSZ]

EVERYTHING HERE IS BRAND NEW!!!!

CONTACT INFO: Carlo, 786 334 3958, Call or Text at any time.. Or PM here.

Ok guys up for sale is all the stuff I needed to build a 2JZ FD RX7, just wasn't worth it anymore so im building a different route.. Everything is BRAND NEW!! My prices are fair and reasonable, I will take ANY reasonable offers as well, please don't be shy, I need this stuff gone!

1.

FULL 2JZGTE Engine w/Fully Built Head

Includes: Stock Block, Cometic Headgasket, L19 ARP Headbolts, Port/Polish/Resurface Head, Ferrea 1mm Oversized Valves w/ Valvejob, BC 272 Cams, BC Springs/Titanium Retainers, Exhaust Manifold, Intake Manifold (Used with Stock runners, those included as well), Fuel Rail, New Timing Belt, New Waterpump..

Price: $5,500 OR BEST OFFER

I paid close to 6K for the engine and doing all the work to it by the machine shop and the upgraded parts etc etc...

YES I WILL PART OUT, PREFER TO PART OUT IN BIGGER PIECES (ie: Head goes to one buyer, block to another etc)

Let me know what you want parted out and we can work out a price, don't have time to set a price for everything individually..

2.

Powerglide Drag Transmission

Includes: Powerglide GM 2 Speed Drag Tranny, Converter, Adapter Plate for 2JZ, Flywheel, Shifter w/Cable

Info: Tranny is 1.76 Gear, Converter Stall is 5500 I believe..

TD Autoworks down here in SFL built an 8.1 Sec Supra on this EXACT Transmission set up making 1100WHP and a 2JZ Mustang running 7.7 Sec making 1300whp with this EXACT Tranny Set up as well just to give an idea of how much power it will hold and how effective it is..

Price: $3500 OR BEST OFFER

YES I WILL PART OUT. Let me know what you need and we can set up a price.. EVERYTHING IS BRAND NEW ON THIS TRANNY AND NEVER USED.. TRANNY WAS BUILT LAST OCTOBER AND NEVER BEEN USED..

3.

Wiring Harness & AEM Standalone

AEM is the Version 2 for a Honda, The harness has been rewired to plug and play with this AEM and YES IT WORKS, Both drag cars I mentioned above were on the same computer and harness.. Just wire it up and go get tuned!

Price: $2,000 OR BEST OFFER for BOTH..

YES I WILL PART OUT, Let me know which you need and we set up a price.

4.

2 Mickey Thompson Drag Radials, Came off a Supra.. 325/50/15, have about 80% Tread left..

Price $300 for both, dont need them.. WAY too big for my RX7 lol

5.

Wheel Barrels for Weld 15" Drag wheels, only missing the faces which I have switched off to my current Welds on the car.. The barrels are 15"x 11 with an 8" Backspace, been told they will fit a Supra..

Price: $250 for BOTH, OR BEST OFFER..

TOTAL PRICE FOR EVERYTHING: $11,550

SALE PRICE FORE EVERYTHING: $10,000

Just putting this out there in case someone has a project they want to build and need everything, this is about 90%-95% of everything you need.. Only things that are left are Turbo, Injectors w/whatever fuel system you want to use, wastegate and BOV, Drive shaft depending on car.. Little things..

Great deal considering I paid about 13K for everything on here.. I just need this gone!

Thank you all for reading..

[firozu]

what kind of intake mani and fuel rail?