|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
|
09-24-2011, 07:11 PM | #1 |
Leaky Injector
|
auto to manual on S14 w/ABS/VLSD - Driveshaft?
Im doing a 5 speed swap on my S14 SE that came with ABS and VLSD from the factory, and I was wondering what options I had for the driveshaft since its impossible of finding a manual ABS s14 driveshaft...
I happen to have a S13 5 speed driveshaft laying around, I was told that I could cut the rear portion on my auto driveshaft and tig weld it onto the front portion of the S13 driveshaft, is this true? |
Sponsored Links |
09-24-2011, 07:36 PM | #2 |
Zilvia Addict
Join Date: Jan 2011
Location: SoCal
Age: 32
Posts: 671
Trader Rating: (43)
Feedback Score: 43 reviews
|
If you want serious vibrations because you welded your driveshaft then do it, other than that DON'T DO IT.
I suggest you just get the front shaft from a manual s14 and replace your auto front shaft with the manual one. Easy. |
09-24-2011, 07:54 PM | #3 |
Leaky Injector
|
Cant I just do that with the front shaft from the S13 driveshaft then? I believe there is not difference between the s13 and s14 front shafts, only the rears are different
|
09-24-2011, 07:55 PM | #4 |
Zilvia Addict
|
drive shaft shop one piece in my personal opinion. OR you can do the auto front piece and manual rear piece.... It is one of the two....
Sorry just saw where your from..... |
09-24-2011, 08:00 PM | #5 |
i just recently did a atuo to manual on my s14
S13-1st section (no difference for ABS/non-ABS): M/T: 395.0mm (15.55") A/T: 432.0mm (17.01") S13 2nd section (no difference for MT/AT) non-ABS: 605.0mm (23.82") ABS: 590.0mm (23.23") S14-A/T 1st section = 421.0mm (16.57") M/T 1st section = 441.0mm (17.37") S14-ABS Rear Section = 636.0mm (25.04") non-ABS Rear Section = 650.0mm (25.59") if you would of google i got this from S13/S14 driveshaft (manual) - Nissan 240SX Forums |
|
09-24-2011, 08:01 PM | #6 |
Post Whore!
Join Date: Dec 2006
Location: Misawa, Japan
Posts: 6,815
Trader Rating: (8)
Feedback Score: 8 reviews
|
__________________
後輪駆動車1番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit |
09-24-2011, 08:35 PM | #8 |
Post Whore!
Join Date: Dec 2006
Location: Misawa, Japan
Posts: 6,815
Trader Rating: (8)
Feedback Score: 8 reviews
|
Gotta pay to play, its on sale for $410 right now
__________________
後輪駆動車1番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit |
09-25-2011, 02:59 PM | #9 |
Join Date: Feb 2011
Location: Southern Indiana
Age: 36
Posts: 13
Trader Rating: (0)
Feedback Score: 0 reviews
|
Shaft Master's. They have excellent stuff and a little bit cheaper than Driveshaft shop. Aluminum or steel. I run an aluminum one and my friend has one also. VERY nice piece and had no problems with it at all.
|
Bookmarks |
|
|