|11-17-2016, 06:41 PM||#1|
1994 240sx Convertible Track Car
1994 Nissan 240sx
This turn-key convertible is track ready and has had an overhaul and complete checkup at MA Motorsports LLC with Chris Forsberg Racing Inc. overseeing the engine swap and suspension upgrades. We were going to enter and compete in drift and time attack events in collaboration with other industry partners, but plans have changed and our loss is your gain.
The factory convertible top does in fact close and clear the roll cage, and the locking handles were modified to clear the cage. The rear window, driver’s window, and quarter windows were uninstalled, but the motors for the quarters are still installed. The Sparco driver’s seat has been mounted solid to the floor and will need a seat rail unless you are very tall and can reach both steering wheel and pedals while sitting fully back against the seat. The front and rear bumpers aren’t perfect and the car is neither smog legal nor street legal in its current form; but if you’ve read this far these little details probably don’t concern you, and as you continue reading you’ll know that this is one solid track car. If you're looking for a show-quality car turn away now, but if you're in the market for a strong platform to start your project with or even take to the track the weekend you buy it, look no further.
The exact chassis mileage and engine mileage are unknown, but both have had extensive, bulletproof work done to them inside and out. Since its VQ35HR engine swap and complete checkup, this car has had less than 50 miles put on it. This car is meant to be driven and driven hard, and its low mileage on the engine and drivetrain means it’s ready for many track days.
In its previous configuration, this car was on the cover of Super Street Magazine in the January 2008 issue, and was featured in Import Tuner Magazine in a two-part special in the Dec 2007 and Feb 2008 issues. The Super Street issue is still up online and can seen here:
Inherit this iconic machine and make it yours!
Engine & Drivetrain
320B0-JK41B Six Speed Transmission
MA Modified and Powdercoated Cross Member
MA Custom Fabricated and Powdercoated Motor Mounts
MA Custom Fabricated Transmission Cross Member and Mount
MA Custom Fabricated Headers
MA Custom Fabricated Straight-pipe Mid-exit Exhaust System
MA Complete Custom Wiring Harness
MA Custom Fabricated Intake Tubes
aFe Power Intake Filters
Mishimoto Dual Electric Fans and Radiator Shroud
Mishimoto Coolant Reservoir Tank
New Clutch, under 50 miles (unknown brand)
New Flywheel, under 50 miles (unknown brand)
KAAZ 2-way differential
Suspension, Steering, & Brakes
Stitch Welded Chassis
Apexi N1 EXV Coilovers
Rear Subframe Collars (unknown brand)
Peak Performance Bushings
Project Mu front Racing Caliper 4 Pistons/4 Pads
Project Mu front Steel Braided Brake Lines
Wilwood Hydraulic Ebrake Assembly
Larger Aftermarket Swaybars (unknown brand)
Peak Performance Inner Tie Rods
Peak Performance Tension Rods
Peak Performance Toe Rods
Peak Performance Traction Rods
Peak Performance RUCAs
MA Motorsports Front Knuckles
MA Motorsports Box-In FLCAs
Power Steering Oil Cooler Kit
Custom Fabricated Roll Cage by Design Craft Fabrication
Sparco Evo Seats
Sparco Six Point Harness (expired 2012)
Sparco Steering Wheel
AEM Gauges: Water Temp, Oil Press, Full Press, Air/Fuel
Custom Gauge Cluster and Center Console by MA Motorsports
Work Emotion Kai 18x9.5
Falken FK452 245/40/18
MB Battles 18x9.5
Falken RT615 245/40/18
Julius body kit
30mm front fenders
50mm rear fenders
Karmotion Fiberglass Vented Hood
Silvia Front End Conversion with Brick Headlights
Brand New OEM Windshield, with zero miles on it
Price: $9,999 obo
Only trade I'd consider at the moment would be for either a 2nd or 3rd gen Forester XT manual.
I’m not in a rush to sell as I would love to donate her parts to my other projects, but she has heritage and I would love to sell her whole to someone who has the time and motivation to get her back on the track where she belongs. I’m open to negotiations for the price, but be reasonable as a lot of time and quality parts went into this car. Absurd offers will be ignored.
Please no negative comments or arbitrary posts, this is a for sale thread. Any such comments will simply be ignored, that simple.
If you would like any more pictures or information, please PM me at any time. This is a serious sale and I’d like to be as transparent, up-front, and honest as possible for you. If you need any legitimacy on my end or reassurance this isn’t a scam or that I’m selling a lemon, please don’t hesitate to ask and I’d be happy to talk/provide proof.
Startup and Walkaround Video:
Last edited by lazy_flip; 01-14-2017 at 05:41 PM..
|11-21-2016, 07:55 PM||#3|
interested in a new 2015 yamaha yzf-r3 + cash?
|11-24-2016, 09:06 PM||#4|
|12-05-2016, 12:27 AM||#6|
|12-10-2016, 10:07 PM||#9|
|12-21-2016, 11:02 PM||#13|
Join Date: Jun 2004
Location: SF Bay Area 94402
Trader Rating: (71)
Feedback Score: 71 reviews
An FYI they never made Work CR Kai in 10.5 those look like the 9.5 versions.
The other wheels you posted are MB Battles.
Best way to do business with me? Make your best offer FIRST.
|01-14-2017, 05:38 PM||#14|
|1994, convertible, track car|