300zx custom boost controller mount - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BooZted_Z32 · 06-08-2015, 10:13 AM

Was bored and looked for a new little project to do and I was tired of seeing my greddy profec boost controller so lamely sitting on my steering Collum housing. So I decided to see where people mount them. Most people mount on the stereo and delete the clock and place in there. I thought it was a cool idea but then I wanted something a little more original. So I only seen some one else do this so I decided to take on the challenge! With a little bit of fiberglass and filler I made a mount on the speedo housing. The guy I saw the idea from just cut a rectangle and filled remaining space with ABS plastic. I wanted a near stock lock so I made mine of fiberglass and touched it up with filler to give it a good finish. Loved the way it came out! Just need to mount and rewire!
Just thought I'd share a little project!
ImageUploadedByTapatalk1433779740.266520.jpg
First cut the rectangle.
ImageUploadedByTapatalk1433779820.148091.jpg
Made some measurements and fiberglassed the housing to get a direct fitment. Little bit of filler to fill in scratches and imperfections.
ImageUploadedByTapatalk1433779918.447134.jpg
Freshly painted flat black(still wet in picture)

Finished product!
ImageUploadedByTapatalk1433779963.649245.jpg
ImageUploadedByTapatalk1433780005.730069.jpg ImageUploadedByTapatalk1433780017.003429.jpg

danbarnett123 · 06-11-2015, 11:32 PM

This is cool

BooZted_Z32 · 06-12-2015, 12:03 AM

Quote:

Originally Posted by danbarnett123

This is cool

Thanks!!(:

06-08-2015, 10:13 AM	#1
BooZted_Z32 Join Date: Jun 2015 Location: California Age: 28 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	300zx custom boost controller mount Was bored and looked for a new little project to do and I was tired of seeing my greddy profec boost controller so lamely sitting on my steering Collum housing. So I decided to see where people mount them. Most people mount on the stereo and delete the clock and place in there. I thought it was a cool idea but then I wanted something a little more original. So I only seen some one else do this so I decided to take on the challenge! With a little bit of fiberglass and filler I made a mount on the speedo housing. The guy I saw the idea from just cut a rectangle and filled remaining space with ABS plastic. I wanted a near stock lock so I made mine of fiberglass and touched it up with filler to give it a good finish. Loved the way it came out! Just need to mount and rewire! Just thought I'd share a little project! ImageUploadedByTapatalk1433779740.266520.jpg First cut the rectangle. ImageUploadedByTapatalk1433779820.148091.jpg Made some measurements and fiberglassed the housing to get a direct fitment. Little bit of filler to fill in scratches and imperfections. ImageUploadedByTapatalk1433779918.447134.jpg Freshly painted flat black(still wet in picture) Finished product! ImageUploadedByTapatalk1433779963.649245.jpg ImageUploadedByTapatalk1433780005.730069.jpg ImageUploadedByTapatalk1433780017.003429.jpg

06-11-2015, 11:32 PM	#2
danbarnett123 Zilvia Junkie Join Date: Sep 2013 Location: so cal Posts: 465 Trader Rating: (3) Feedback Score: 3 reviews	This is cool __________________ 1991 Z32 NA t-tops 5 speed 1997 S14s KA24 5 speed and SR 6 speed