NM FS: PBM mid mount intercooler, ISIS radiator with dual fan shroud

[3bar_dc2]

I'm parting out my setup and have a PBM HMIC (midmount) intercooler for sale. Currently installed in a S14 with S13 sr, however I believe it's meant for a S14 sr as the hotpipe is a little short which requires a longer coupler off the back of the intercooler. It is used so expect some scratches and such.

The cold side pipe is meant for a Greddy style manifold and is tapped for a IAT sensor already (can be plugged up if you don't need it).

Asking $320 shipped for the HMIC setup. SOLD

Also have a ISIS radiator for S14 SR swap and a dual fan and shroud setup. Also including brand new gates radiator hoses. The radiator is used but the fans are brand new. Fans are not made by ISIS. I'll remove the radiator and take better pictures when I get home from work. The lower hose had to be trimmed a little to fit.

Asking $250 shipped for the radiator, fans, and hoses













Thanks,
Sean
five 0 five 720 97otwo

[Bleakley]

Fit between frame rails of S13 between rad and condenser?

[3bar_dc2]

I'm not too sure if it would fit with a condenser, at least it wouldn't on a s14. PBM uses the same intercooler for s13 and s14 I believe

[Bleakley]

Originally Posted by 3bar_dc2

I'm not too sure if it would fit with a condenser, at least it wouldn't on a s14. PBM uses the same intercooler for s13 and s14 I believe

Noice! If you still have this come paycheck, I will probably scoop this up. I will PM you.
Free bump.

[3bar_dc2]

Pbm mid mount sold! Radiator and fans still available

[3bar_dc2]

Radiator and fan pics added

[3bar_dc2]

Bump!!!!!!!!

[anti tyler]

Just a heads up, last time I read the PBM website said that will not fit with a condenser

[3bar_dc2]

Ttt!!!!!!!!!!