|
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
|
08-30-2012, 06:31 PM | #1 |
Zilvia Member
|
need help with rb20 into s14 pics of plugs unplugged
Ive got to swap pretty much finished and cant get it to crank...the engine harness is a harness bought from wiring specialties and i made the trans harness...im getting fuel ive check for leaks and etc...but the car just turns over and its not getting spark. I have a few plugs that arent plugged up im hoping someone can identify as i dont remember where they went...heres pics..
the two black relays to the left came on my harness from wiring specialties now i have empty blue relay and nothing to plug in? This plug i cant see anywhere for it to plug into at its attached to the trans harness These two are right by the wipers...thinking one was for CC but i dont know can someone identfy?
__________________
I do rb25 in s14 wiring pm if interested 200.00 |
Sponsored Links |
08-31-2012, 04:54 PM | #3 |
Zilvia Member
Join Date: Nov 2011
Location: Buckeye AZ
Age: 40
Posts: 289
Trader Rating: (7)
Feedback Score: 7 reviews
|
That empty blue relay just sits in my passenger side next to the ecu the one up top mine just hangs there zip tied to nothing I have nothing running to my tranny as for wiring. Double check your ignitor ground or replace the ignitor...Check coilpacks
|
09-02-2012, 09:52 AM | #4 |
Zilvia Member
|
replace ignitor its fine....still no spark...figured out all plugs except one by the trans i did find out on the ka that the plug is for 4 ecu grounds, 2 oxygen heater sensors and a cps sensor its a 8 pin plug with 7 wires
__________________
I do rb25 in s14 wiring pm if interested 200.00 |
Bookmarks |
|
|