vq35hr s13 build - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nd240sx3 · 03-10-2012, 11:32 AM

Quote:

Originally Posted by sexcii-zenki

soon as mine is running ill pm u so we can meet on 78 or 80 and ruuun haha

lets do it.... she runs perfect now.... i just have to get it to the tuners and get her tuned....

nd240sx3 · 03-24-2012, 12:41 PM

first run base line
vq35hr powered s13 base line run - YouTube

last run
vq35hr powered s13 final dyno run - YouTube

Yellow4g63 · 03-24-2012, 03:11 PM

very good numbers out of the box.

JDMpurest · 03-24-2012, 03:17 PM

Could you post info on what you did with the wipers? I'm leaving japan to go back to the states and im bringing a RHD clip from my car with me. I don't know how to do the wipers though.

GripTerror · 03-24-2012, 04:02 PM

pure sex .

nd240sx3 · 03-25-2012, 11:10 PM

Quote:

Originally Posted by JDMpurest

Could you post info on what you did with the wipers? I'm leaving japan to go back to the states and im bringing a RHD clip from my car with me. I don't know how to do the wipers though.

Just cut hole out on opposite side and mount the motor,

nd240sx3 · 03-25-2012, 11:11 PM

Quote:

Originally Posted by GripTerror

pure sex .

Thanx a lot

JDMpurest · 03-26-2012, 12:24 AM

Quote:

Originally Posted by nd240sx3

Just cut hole out on opposite side and mount the motor,

Anything with the wiring or internal linkage?

nd240sx3 · 03-28-2012, 05:54 PM

the spot where the the rhd wiper motor sits is already there on usdm u just have to cut it out and when using jdm chassis harness and linkage it all works

nd240sx3 · 05-07-2012, 08:41 PM

first time sliding the swapped s13 at englistown nj clubloose event sorry for the poor quality! was taken on my friends iphone!

clubloose spring moves nick zenzer - YouTube

clubloose spring moves nick zenzer #2 - YouTube

clubloose spring moves nick zenzer #3 - YouTube

clubloose spring moves nick zenzer #4 - YouTube

clubloose spring moves nick zenzer #5 - YouTube

irax · 05-08-2012, 01:18 AM

why the fuck did you just bump a build thread ?

DreamN · 05-08-2012, 01:52 AM

it's a spammer

irax · 05-08-2012, 01:53 AM

they are getting good

DreamN · 05-08-2012, 02:10 AM

oh and by the way... so jealous of this build. wish I had a house already. i'd at least be looking for deals on VQ drivetrains already.

still not understanding why the RHD. I've seen other VQHR swaps that didn't require it. not hating, just don't get why this one needed it.

nd240sx3 · 05-08-2012, 07:23 AM

Quote:

Originally Posted by DreamN

oh and by the way... so jealous of this build. wish I had a house already. i'd at least be looking for deals on VQ drivetrains already.

still not understanding why the RHD. I've seen other VQHR swaps that didn't require it. not hating, just don't get why this one needed it.

in an s14 there is more room, not s13.... i explained it in the build... ive asked for people like u too show me links to other vqhr s13 swaps but... it seems everyone says there are a few and yet nobody can provide me with the proof... like i have said before ill eat me words when someone provides me proof, until then my swap was the only logical way around the starter issue

superadvan_240 · 05-17-2012, 10:12 AM

i parked across from you behind the red austin healey (pearl white kouki) at the tristatetuners spring meet... very nice car!

DreamN · 05-17-2012, 11:01 AM

Quote:

Originally Posted by nd240sx3

in an s14 there is more room, not s13.... i explained it in the build... ive asked for people like u too show me links to other vqhr s13 swaps but... it seems everyone says there are a few and yet nobody can provide me with the proof... like i have said before ill eat me words when someone provides me proof, until then my swap was the only logical way around the starter issue

You're right, they're all S14s that I'm able to find. The only other S13 is one where it was modified quite a bit to have everything fit.

nd240sx3 · 05-22-2012, 07:36 PM

Quote:

Originally Posted by DreamN

You're right, they're all S14s that I'm able to find. The only other S13 is one where it was modified quite a bit to have everything fit.

thank you!

WhiteGLX · 06-11-2012, 09:48 AM

Nick comeon.......i had VQ35HR in my S13 LHD all day. I sold you parts from my swap when i parted out the car. I am going to be installing the same VQ35HR in a month or so into an S14 i just picked up working A/C, PS functional gauges any all. Hope the driveshaft and intakes are still workin great for you though.

nd240sx3 · 06-13-2012, 11:18 AM

Quote:

Originally Posted by WhiteGLX

Nick comeon.......i had VQ35HR in my S13 LHD all day. I sold you parts from my swap when i parted out the car. I am going to be installing the same VQ35HR in a month or so into an S14 i just picked up working A/C, PS functional gauges any all. Hope the driveshaft and intakes are still workin great for you though.

yes they are.... yes urs was still lhd but what did u have to do to get the starter to clear the rack? remember when i spoke to u i had already gone rhd when u offered to sell me ur setup...

Yellow4g63 · 06-13-2012, 11:38 AM

He extended the shaft and bolted it to the motor mount or something like that.

WhiteGLX · 06-14-2012, 09:44 AM

I made a linking arm for the starter solenoid and moved it about 8" fwd. With the correct adjustment of the arm the starter worked perfect each time. Took a bit of thinking when we ran into the problem but the effort involved was minimal and cost of parts was like $30. I didnt advertise it very much when i had done it, so it wasnt readily available information back in 2010.

nd240sx3 · 07-02-2012, 09:29 AM

Quote:

Originally Posted by WhiteGLX

I made a linking arm for the starter solenoid and moved it about 8" fwd. With the correct adjustment of the arm the starter worked perfect each time. Took a bit of thinking when we ran into the problem but the effort involved was minimal and cost of parts was like $30. I didnt advertise it very much when i had done it, so it wasnt readily available information back in 2010.

but like i stated above at the time of my swap i did not know about what u had done... and i did not learn about it until my rhd conversion was already complete...if i had known before i did the rhd conversion i would of just purchased ur setup when i talked to u... since its all done and over with i can still justify what i did! but i know there are others who cannot.

TheRealSy90 · 09-09-2017, 12:22 AM

Quote:

Originally Posted by nd240sx3

but like i stated above at the time of my swap i did not know about what u had done... and i did not learn about it until my rhd conversion was already complete...if i had known before i did the rhd conversion i would of just purchased ur setup when i talked to u... since its all done and over with i can still justify what i did! but i know there are others who cannot.

Could you fix the pictures through this thread?

ka-titties · 09-11-2017, 09:25 AM

Quote:

Originally Posted by TheRealSy90

Could you fix the pictures through this thread?

http://zilvia.net/f/showthread.php?t=648507

03-24-2012, 12:41 PM	#62
nd240sx3 Zilvia Junkie Join Date: Feb 2003 Location: warminster pa Age: 43 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	dyno vids first run base line vq35hr powered s13 base line run - YouTube last run vq35hr powered s13 final dyno run - YouTube

03-24-2012, 03:11 PM	#63
Yellow4g63 Zilvia FREAK! Join Date: Jan 2003 Location: Socal Posts: 1,454 Trader Rating: (5) Feedback Score: 5 reviews	very good numbers out of the box. __________________ 95 240sx RB20 415whp 91 Nx2000 VVL yo

03-24-2012, 03:17 PM	#64
JDMpurest Zilvia Member Join Date: Apr 2007 Location: Michigan Posts: 202 Trader Rating: (5) Feedback Score: 5 reviews	Could you post info on what you did with the wipers? I'm leaving japan to go back to the states and im bringing a RHD clip from my car with me. I don't know how to do the wipers though. __________________

05-08-2012, 01:18 AM	#71
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 40 Posts: 4,248 Trader Rating: (4) Feedback Score: 4 reviews	why the fuck did you just bump a build thread ? __________________ Drives a BRZ and is building a V6 S12 coupe.

05-08-2012, 01:52 AM	#72
DreamN Post Whore! Join Date: Nov 2006 Location: SoCal - 818 Age: 39 Posts: 10,692 Trader Rating: (54) Rides Gallery: DreamN Feedback Score: 54 reviews	it's a spammer __________________ - Jimmy Wanted: TBD For Sale: TBD

03-24-2012, 04:02 PM	#65
GripTerror Zilvia Addict Join Date: Nov 2009 Location: Canada Age: 39 Posts: 685 Trader Rating: (0) Feedback Score: 0 reviews	pure sex .

03-28-2012, 05:54 PM	#69
nd240sx3 Zilvia Junkie Join Date: Feb 2003 Location: warminster pa Age: 43 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	the spot where the the rhd wiper motor sits is already there on usdm u just have to cut it out and when using jdm chassis harness and linkage it all works

05-07-2012, 08:41 PM	#70
nd240sx3 Zilvia Junkie Join Date: Feb 2003 Location: warminster pa Age: 43 Posts: 390 Trader Rating: (0) Feedback Score: 0 reviews	first time sliding the swapped s13 at englistown nj clubloose event sorry for the poor quality! was taken on my friends iphone! clubloose spring moves nick zenzer - YouTube clubloose spring moves nick zenzer #2 - YouTube clubloose spring moves nick zenzer #3 - YouTube clubloose spring moves nick zenzer #4 - YouTube clubloose spring moves nick zenzer #5 - YouTube

05-08-2012, 01:53 AM	#73
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 40 Posts: 4,248 Trader Rating: (4) Feedback Score: 4 reviews	they are getting good __________________ Drives a BRZ and is building a V6 S12 coupe.

05-08-2012, 02:10 AM	#74
DreamN Post Whore! Join Date: Nov 2006 Location: SoCal - 818 Age: 39 Posts: 10,692 Trader Rating: (54) Rides Gallery: DreamN Feedback Score: 54 reviews	oh and by the way... so jealous of this build. wish I had a house already. i'd at least be looking for deals on VQ drivetrains already. still not understanding why the RHD. I've seen other VQHR swaps that didn't require it. not hating, just don't get why this one needed it. __________________ - Jimmy Wanted: TBD For Sale: TBD

05-17-2012, 10:12 AM	#76
superadvan_240 Join Date: Sep 2011 Location: doylestown, PA Age: 33 Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	i parked across from you behind the red austin healey (pearl white kouki) at the tristatetuners spring meet... very nice car! __________________

06-11-2012, 09:48 AM	#79
WhiteGLX Zilvia Addict Join Date: Jan 2003 Location: Baltimore, MD Age: 40 Posts: 872 Trader Rating: (7) Feedback Score: 7 reviews	Nick comeon.......i had VQ35HR in my S13 LHD all day. I sold you parts from my swap when i parted out the car. I am going to be installing the same VQ35HR in a month or so into an S14 i just picked up working A/C, PS functional gauges any all. Hope the driveshaft and intakes are still workin great for you though. __________________ *NASA HPDE Instructor*

06-13-2012, 11:38 AM	#81
Yellow4g63 Zilvia FREAK! Join Date: Jan 2003 Location: Socal Posts: 1,454 Trader Rating: (5) Feedback Score: 5 reviews	He extended the shaft and bolted it to the motor mount or something like that. __________________ 95 240sx RB20 415whp 91 Nx2000 VVL yo

06-14-2012, 09:44 AM	#82
WhiteGLX Zilvia Addict Join Date: Jan 2003 Location: Baltimore, MD Age: 40 Posts: 872 Trader Rating: (7) Feedback Score: 7 reviews	I made a linking arm for the starter solenoid and moved it about 8" fwd. With the correct adjustment of the arm the starter worked perfect each time. Took a bit of thinking when we ran into the problem but the effort involved was minimal and cost of parts was like $30. I didnt advertise it very much when i had done it, so it wasnt readily available information back in 2010. __________________ *NASA HPDE Instructor*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode