TN '92 hatchback street/track car - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RanciD · 12-02-2016, 05:02 PM

Thinking of selling my track car because I spend all my time on motorcycles these days and this thing just doesn't get the love it deserves.

~125k miles
base model
stock green paint in OK condition
stock KA engine with new headgasket ~5k miles ago
ARP head studs
interior removed behind the front seats for the roll cage
car has some rust, it was a new york car before I bought it
I have owned it since 2004, been garage kept since then
body is straight but cosmetically the car is far from perfect, some door dings, scratches, missing paint, etc.
dent on rear driver side corner

mods:
Custom 4 point cage with roll bar fabbed by Robinson Racing in GA
Takata 4pt harness (driver side)
S14 manual seat belt (passenger side)
Brembo Rotors (front and rear)
Hawk HPS Pads (front and rear)
Momo Race Steering Wheel
Momo Steering Wheel Hub
NRG Type 3 Quick Release (black)
Ground Control Coilovers (450F, 400R) with Torrington needle bearings (2x NTA-4052, 4x TRA-4052)
Koni 8610-1436 Race Struts (front and rear)
S14 Subframe with Stance aluminum conversion bushings
SPL toe, traction, and upper control arms
Tein Camber Plates (front)
Tein Pillowball Mounts (rear)
Veilside180sx V3 Front Strut Housings
Veilside180sx V3 Rear Strut Housings
Whiteline Sway Bar (front)
Z32 Rear Uprights with SPL spherical bearings
Bride FG Seat Rail (driver's side)
Bride Zeta 3 Seat (black hyper)
Bridgestone Potenza RE960AS Pole Position 225/45R17 on 17x9 +20 5zigen FN01RC (Titanium Bronze)
Driver fender wire harness relocated into engine bay

Clean title, has all stock emissions garbage. Only looking to get rid of it because I don't have time or motivation to drive it. Would make an ideal car for something looking to get into HPDEs or similar. This car is not some beat to hell drift missile piece of shit with garbage chinese parts off ebay. It is a well built track car with a lot of high quality suspension work. I have pretty much everything I've removed from the car including all the interior pieces and various spare parts that I will throw in with the car.

Asking $4500. Located in Murfreesboro, TN. Reply here or PM me if you're interested.

MandTPhotography · 12-04-2016, 02:42 PM

Bump.

All this thing needs is a S14 VLSD or a real LSD and it would be 10/10.

GLWS, would make a fun and capable HPDE car for sure.

Anarchistchiken · 01-15-2017, 02:53 AM

Hey bud is the car still for sale? I'm in nolensville I'd love tome look at it, got cash in hand

12-02-2016, 05:02 PM	#1
RanciD Zilvia Junkie Join Date: Apr 2003 Location: Nashville Posts: 375 Trader Rating: (5) Feedback Score: 5 reviews	'92 hatchback street/track car Thinking of selling my track car because I spend all my time on motorcycles these days and this thing just doesn't get the love it deserves. ~125k miles base model stock green paint in OK condition stock KA engine with new headgasket ~5k miles ago ARP head studs interior removed behind the front seats for the roll cage car has some rust, it was a new york car before I bought it I have owned it since 2004, been garage kept since then body is straight but cosmetically the car is far from perfect, some door dings, scratches, missing paint, etc. dent on rear driver side corner mods: Custom 4 point cage with roll bar fabbed by Robinson Racing in GA Takata 4pt harness (driver side) S14 manual seat belt (passenger side) Brembo Rotors (front and rear) Hawk HPS Pads (front and rear) Momo Race Steering Wheel Momo Steering Wheel Hub NRG Type 3 Quick Release (black) Ground Control Coilovers (450F, 400R) with Torrington needle bearings (2x NTA-4052, 4x TRA-4052) Koni 8610-1436 Race Struts (front and rear) S14 Subframe with Stance aluminum conversion bushings SPL toe, traction, and upper control arms Tein Camber Plates (front) Tein Pillowball Mounts (rear) Veilside180sx V3 Front Strut Housings Veilside180sx V3 Rear Strut Housings Whiteline Sway Bar (front) Z32 Rear Uprights with SPL spherical bearings Bride FG Seat Rail (driver's side) Bride Zeta 3 Seat (black hyper) Bridgestone Potenza RE960AS Pole Position 225/45R17 on 17x9 +20 5zigen FN01RC (Titanium Bronze) Driver fender wire harness relocated into engine bay Clean title, has all stock emissions garbage. Only looking to get rid of it because I don't have time or motivation to drive it. Would make an ideal car for something looking to get into HPDEs or similar. This car is not some beat to hell drift missile piece of shit with garbage chinese parts off ebay. It is a well built track car with a lot of high quality suspension work. I have pretty much everything I've removed from the car including all the interior pieces and various spare parts that I will throw in with the car. Asking $4500. Located in Murfreesboro, TN. Reply here or PM me if you're interested. __________________ '92 240SX, '07 G35S 6MT, '09 CBR600RR Last edited by RanciD; 12-03-2016 at 11:59 AM..

12-04-2016, 02:42 PM	#2
MandTPhotography Zilvia Addict Join Date: Jul 2008 Location: Wilmington, NC Posts: 801 Trader Rating: (2) Feedback Score: 2 reviews	Bump. All this thing needs is a S14 VLSD or a real LSD and it would be 10/10. GLWS, would make a fun and capable HPDE car for sure.

01-15-2017, 02:53 AM	#3
Anarchistchiken Join Date: Jan 2017 Location: Nashville Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Hey bud is the car still for sale? I'm in nolensville I'd love tome look at it, got cash in hand