|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
05-28-2005, 01:20 PM | #1 |
Nissanaholic!
Join Date: May 2003
Location: Bay Area, CA
Posts: 1,618
Trader Rating: (0)
Feedback Score: 0 reviews
|
problem with brake pad not contacting rotor 100%
This has happened to me twice now with two individual rotors. The first time, I installed my track pads and brembos, and on the rear right rotor (iirc), about 1/4'' of the very inside of the disc surface (closest to the hub) didn't contact the pad at all, and I only noticed this once rust started building up and turned slightly orange (a thin orange ring)
I thought it wasn't too major, but I have now reinstalled my stock OEM pads, and stock rotors, and the same thing is happening, but on the rear left rotor now. It's happening with a slightly bigger width, and on the very outside of the rotor surface. I'm suspecting this could be the a slight problem with the clips? maybe they're not seated 100% into the caliper? any input would be very helpful. thanks. |
Sponsored Links |
Bookmarks |
|
|