Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 12-08-2011, 05:22 PM   #1
emericanz
Zilvia Junkie
 
emericanz's Avatar
 
Join Date: Sep 2010
Location: doylestown, pa
Age: 33
Posts: 397
Trader Rating: (7)
emericanz is an unknown quantity at this point
Feedback Score: 7 reviews
RB rb20det swap help

im pretty far through my rb20det s13 swap and ran into a few issues one being power steering. my s13 is a 90 so the resivour is on the opposite side now i have the converstion for the rb pump and that line that connects to the steering rack.

but wht do i do about the line that "would" run under the oil pan then to the other side of the engine bay? i have the original hard line and rez but no line to the pump.

any help please?
emericanz is offline   Reply With Quote
Sponsored Links
Old 12-08-2011, 06:27 PM   #2
finesses240
Zilvia Member
 
finesses240's Avatar
 
Join Date: Feb 2005
Location: San Diego
Age: 41
Posts: 279
Trader Rating: (3)
finesses240 is an unknown quantity at this point
Feedback Score: 3 reviews
Send a message via AIM to finesses240
just get ka dohc p/s lines (high pressure, etc) , ka dohc reservoir, and a rb25 p/s pump. The rb20 hicas pump has two outlets and just plugging one of them is not the right way to do it, regardless what internet says.
__________________
*AE86 SR20 mounts*Roll Cages (any specification)**Custom Fabrication*
finesses240 is offline   Reply With Quote
Old 12-08-2011, 09:22 PM   #3
turbociv910
Zilvia Member
 
Join Date: Oct 2011
Location: wilmington nc
Age: 35
Posts: 241
Trader Rating: (0)
turbociv910 is an unknown quantity at this point
Feedback Score: 0 reviews
mines plugged and it works fine. has been for years.
__________________
www.carolinadyno.com
s13 LSx turbo drag car- 1.42 60 ft, 6.32 1/8
turbociv910 is offline   Reply With Quote
Old 12-09-2011, 04:16 AM   #4
emericanz
Zilvia Junkie
 
emericanz's Avatar
 
Join Date: Sep 2010
Location: doylestown, pa
Age: 33
Posts: 397
Trader Rating: (7)
emericanz is an unknown quantity at this point
Feedback Score: 7 reviews
yea mines set up for sohc. and i have everything but teh reservoir lines hooked up i have the rb20 pump and only one of the lines hooked up.

i think i just need to buy dohc set up...
emericanz is offline   Reply With Quote
Old 12-12-2011, 02:46 PM   #5
finesses240
Zilvia Member
 
finesses240's Avatar
 
Join Date: Feb 2005
Location: San Diego
Age: 41
Posts: 279
Trader Rating: (3)
finesses240 is an unknown quantity at this point
Feedback Score: 3 reviews
Send a message via AIM to finesses240
Quote:
Originally Posted by turbociv910 View Post
mines plugged and it works fine. has been for years.
well then you are one of the few lol. Everyone I have done and seen always blow the seal on the pump.
__________________
*AE86 SR20 mounts*Roll Cages (any specification)**Custom Fabrication*
finesses240 is offline   Reply With Quote
Old 12-12-2011, 03:25 PM   #6
S13Gene
 
Join Date: Dec 2010
Location: Panama City, Fl
Posts: 33
Trader Rating: (0)
S13Gene is an unknown quantity at this point
Feedback Score: 0 reviews
Just buy the Chase bay lines and reservoir and a rb25 ps pump
S13Gene is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net