CA FS: Complete High HP KA Turbo / Intercooler / Intake Mani Setup

[nosajton]

SOLD SOLD AND SOLD! THANKS FOR LOOKING! I Can still tune your ecu for a similar setup if interested. Specalize in tuning KA/SR/RB/VG/VQ/VK/GA motors!


Testing the waters on my complete KA turbo and intake manifold kits.. this kit has low low miles (under 1k) and has been stored in my garage for over a year.. I now have different plans and may be selling this setup to a good home. I'm still in the process of getting all the pictures together but I think my prices are set to sell quickly. Don't want to ship anything would prefer to meet a buyer in person so you can see the quality of this stuff. Has some scratches thats why prices are so low but definitely can be polished out.

I don't want to part out any of this stuff yet try to sell as a complete kit because it fitmet is perfect if purchased together.

Below is a list of what is included and what I paid for it.. this is a setup that took years to perfect and will last a and not give you any issues.

I used a water to air intercooler with a heat exchanger to replace a large air to air intercooler to keep that 'sleeper' look but my car made over 700whp when I retired it on this setup.

Whats included:

Bullseye Power T3 Flanged S362r 62mm turbo with Comp-R Extended Tip Wheel and Polished
race housing. Vband on both Exhaust and Turbo Outlet. Turbo good for 700whp and
spools as fast a gt35r. Under 1k miles on turbo. cost over $1300.

SLS T3 Manifold Equal Length Runners.. this manifold is built to LAST thick ass stainless used and nice backpurged tig welds. Currently wrapped in 'carbon fiber' exhaust wrap Cost $800

Turbosmart Ultragate 38mm wastegate with 14psi spring installed, worked great with this setup no boot creep at all paid $269

Custom vband downpipe to get exhaust out of engine bay with recirculated wastegate dump (can be modified to screamer pipe) $200

Custom tig welded anderson hand built aluminum intercooler pipes. No Couplers were used on this setup was sick of couplers coming off so i used oringed vbands. One vband on turbo and one vband on intercooler and comes with a tial alpha Q 50mm bov. cost $560

Water To Air Intercooler with heat exhanger and pump good to 1000whp. AIT's never went above 120degrees on a 40psi pull this thing kicked ass over any AIR to AIR Intercooler I have tried. cost $800 total for all

Xcessive motorsports Intake manifold with custom Q45 Throttle body fitted with a wiggins clamp as vbands dont move and the wiggins clamp allowed motor to move and not break the intercooler or pipes. Paid $550

Buy a complete turnkey KA turbo setup ready for a reliable 400-700whp. You can drive with this setup to new york and back and feel confident that nothing will fail.

Total spent adds up to over $4400 I am asking $2800 for everything

this is a video of the car before the complete vband intercooler pipes were installed but manifold/turbo/etc is the same

This is what 700whp looks like - YouTube

I'm not home right now but if I get some interest I'll get a few pictures together but this is a bad ass kit definately one of a kind.

SOLD SOLD AND SOLD! THANKS FOR LOOKING! I Can still tune your ecu for a similar setup if interested. Specalize in tuning KA/SR/RB/VG/VQ/VK/GA motors!

[d_nice]

cant upload the youtube ..u have pics if the mani and intake please

[aznoy]

Is that ball bearing?

[SSCACAHUATES]

F%*k!!!!!!!!!!!!!!!! that is ridiculous GLWS

[turbo2nr]

is the s362 divided or singe scroll?>

[nosajton]

Turbo is not divided.. and it is Journal bearing but with 360 degree race thrust bearing.. reason i went with a journal bearing cartridge is for rebuild ability.. when the turbo does go bad its less than $200 to make it new again..

hope this helps..

I dont really have many videos of the car with hood off i've got a lot of drag racing videos showing the power but this thing will make 40+psi all day every day for a hardcore setup but has a 14psi spring in.. made 350whp at 14psi just to give you a idea of what this bad boy can flow..

I can also help local people with tuning and their builds.. I have a dyno at my disposal too for local tunes.. just pm me.

[GVR4]

$2800 for everything listed?

[mvang44]

Pm sent! Lmk your respond and add pictures!

[nosajton]

responded to the two people interested. I really don't want to ship it I prefer someone to come grab it and do the transaction here locally but money talks.

I have it all boxed up ready to go but here are some pictures of what it looked like. It clears A/C, Power Steering and Brake master cylinder.. Also comes with a wiggins clamp that connects piping to throttle body, not a cheap-o vibrant fake ass wiggins the real deal the clamp alone I paid a pretty penny for.

Here are some pictures of when it was in my car, now its in boxes sitting. I'd like it to go to either a good home or I'll wait and put it back on my car.

[nosajton]

Also, If I get the $2800 offer, I'll include a oil pan that clears A/C but like I said I'd prefer to do it locally buy money does talk pm me if you're interested.

[nosajton]

And I can retune whoevers ecu with fuel and timing maps for this turbo and your application, For a reduced extra fee of course of what I normally charge to tune a ECU.

[tek_88]

2800 shipped, pm me.

[nosajton]

You we're PM'd tek_88, I'll accept your offer if you accept to the terms as stated in the PM.

[nosajton]

SOLD!!! Thanks for looking. Glad its going to a good home