Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 03-31-2014, 10:48 PM   #1
Nazdog247
 
Join Date: Feb 2014
Location: Bay Area
Posts: 42
Trader Rating: (0)
Nazdog247 is an unknown quantity at this point
Feedback Score: 0 reviews
While turning wheel hard to the left my electronics cut out the turn back on

Alright so I have a 95 240sx and been having some problems with the wiring on the car... When I turn hard to the left I've been realizing every once and awhile my lights inside and out will flicker. Dash lights my deck and my gauges that I have will turn off and turn right back on... I have no clue what it could be I know my tires rub on the inside but jus like any lowered car... Been realizing this lately and was wonderining if anyone knew what it was... Thanks
Nazdog247 is offline   Reply With Quote
Sponsored Links
Old 03-31-2014, 11:05 PM   #2
heychris
Zilvia Addict
 
Join Date: Oct 2007
Location: SkiTown USA
Posts: 760
Trader Rating: (20)
heychris has a spectacular aura aboutheychris has a spectacular aura aboutheychris has a spectacular aura aboutheychris has a spectacular aura aboutheychris has a spectacular aura aboutheychris has a spectacular aura about
Feedback Score: 20 reviews
Searching is your friend......sounds like a short

Sent from my SM-N900V using Tapatalk
heychris is offline   Reply With Quote
Old 03-31-2014, 11:12 PM   #3
Nazdog247
 
Join Date: Feb 2014
Location: Bay Area
Posts: 42
Trader Rating: (0)
Nazdog247 is an unknown quantity at this point
Feedback Score: 0 reviews
Yeah I'm sure it's a short somewhere jus wondering if anyone knew where it could be. Just replaced a fuse that was blown under my steering wheel... Idk if that will do anythin thou lol
Nazdog247 is offline   Reply With Quote
Old 03-31-2014, 11:21 PM   #4
typical
 
Join Date: Mar 2009
Location: MI
Posts: 10
Trader Rating: (0)
typical is an unknown quantity at this point
Feedback Score: 0 reviews
If you're lowered and know you're rubbing, I'd check the wire harness in the wheel well. Most people relocate that up thru the fender. Just a thought, worth a shot.

Disclaimer: I only have s13 experience and am not very bright. Just trying to help
typical is offline   Reply With Quote
Old 03-31-2014, 11:48 PM   #5
Nazdog247
 
Join Date: Feb 2014
Location: Bay Area
Posts: 42
Trader Rating: (0)
Nazdog247 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by typical View Post
If you're lowered and know you're rubbing, I'd check the wire harness in the wheel well. Most people relocate that up thru the fender. Just a thought, worth a shot.

Disclaimer: I only have s13 experience and am not very bright. Just trying to help
Thanks for your input I'll have to check around for the harness tomorrow that might be it! It's weird cuz sometimes I'll be maybe 1/2 wheel turned and it will do it an others I'll be fully cranked and nothing...lol
Nazdog247 is offline   Reply With Quote
Old 04-01-2014, 12:31 AM   #6
240boi115
Zilvia FREAK!
 
240boi115's Avatar
 
Join Date: Sep 2012
Location: Torrance
Age: 31
Posts: 1,497
Trader Rating: (6)
240boi115 is an unknown quantity at this point
Feedback Score: 6 reviews
im almost 99% sure its the harness. i lowered my car and forgot about it and on the ride home had some issues ooooooh boy. just take the fender off and get you some zipties and youll be all set. also if the wires have been eaten through youll need to repair/ replace them. keep electrical tape on you.... youll need it
__________________
Quote:
Originally Posted by 13esim View Post
I'll trade you my 300ZX and my older sister
my 240 broke down..again
240boi115 is offline   Reply With Quote
Old 04-01-2014, 06:42 AM   #7
Nazdog247
 
Join Date: Feb 2014
Location: Bay Area
Posts: 42
Trader Rating: (0)
Nazdog247 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by 240boi115 View Post
im almost 99% sure its the harness. i lowered my car and forgot about it and on the ride home had some issues ooooooh boy. just take the fender off and get you some zipties and youll be all set. also if the wires have been eaten through youll need to repair/ replace them. keep electrical tape on you.... youll need it
Thank you! That sounds like the problem... So would I need to remove my fender as we'll? And I believe there's harness on each side right? so I would need to take off both my fenders to do this?
Nazdog247 is offline   Reply With Quote
Old 04-01-2014, 11:06 AM   #8
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,675
Trader Rating: (18)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 18 reviews
Quote:
Originally Posted by typical View Post
If you're lowered and know you're rubbing, I'd check the wire harness in the wheel well. Most people relocate that up thru the fender. Just a thought, worth a shot.

Disclaimer: I only have s13 experience and am not very bright. Just trying to help
+1 this!
I'm sure this is the issue. Take that fender off and take a look.
Dboyizmlg is offline   Reply With Quote
Old 04-01-2014, 09:16 PM   #9
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Feedback Score: 19 reviews
Send a message via AIM to fliprayzin240sx
Quote:
Originally Posted by Nazdog247 View Post
Thank you! That sounds like the problem... So would I need to remove my fender as we'll? And I believe there's harness on each side right? so I would need to take off both my fenders to do this?
Look first to see if that it is your issue. If you see wires rubbed out and bare, then you're gonna have to take your fenders off to relocate them higher up.

http://zilvia.net/f/showthread.php?t=233752
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote
Old 04-04-2014, 04:43 PM   #10
dallasb53
Zilvia Member
 
Join Date: Nov 2012
Location: Alabama
Age: 33
Posts: 174
Trader Rating: (1)
dallasb53 is an unknown quantity at this point
Feedback Score: 1 reviews
your gonna have to take your fender wells off to check. iirc the harness goes from your fuse box down the left outside engine bay and then on the front of the radiator core support. there is a wiring harness on the right side but it goes from the front of your motor over the top and into the wiring harness inside the engine bay. not likely to get rubber out.

been awhile since i pulled my wiring harnesses lol
dallasb53 is offline   Reply With Quote
Reply

Bookmarks

Tags
electronics, wiring


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net