CA Ft: 1995 s14 ka24de track ready! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

lejeffrey12 · 10-29-2014, 11:33 PM

1995 s14 se clean title
KA with about 100,xxx on motor.
260,xxx on chassis (previous owner says it got rebuilt at 160,xxx but who knows!)
4pt. Cusco roll cage with welded door bars.
4-2-1 after market headers.
Custom made 2.5" exhaust with magna flow dual tip muffler.
Megan street series coilovers.
Megan Ruca's.
Cut and shortened knuckles with 2000 Infiniti i30 tie rods.
KAAZ 2 way.
Drag Dr31's 17x9 +17 &17x9 +28 running 20mm bolt on spacers.
f1 spec driver bucket seat.
Stock se s14 passenger seat.
Power everything.
Ice cold a/c and hot heater.
6k HID's.
Car is pretty much drift ready.
Drove it at asb (all star bash) and had zero problems!
Only con is that my valve seals are donezoes so it smokes after sitting at idle.
Call/text 7142326630 and I'll send you some pics.
I'll post pics on the thread once I get home from work.
Thanks for looking!

currently has a magna flow muffler welded on instead of a full blast pipe.

10-29-2014, 11:33 PM	#1
lejeffrey12 Leaky Injector Join Date: Apr 2011 Location: orange county Age: 30 Posts: 138 Trader Rating: (0) Feedback Score: 0 reviews	Ft: 1995 s14 ka24de track ready! 1995 s14 se clean title KA with about 100,xxx on motor. 260,xxx on chassis (previous owner says it got rebuilt at 160,xxx but who knows!) 4pt. Cusco roll cage with welded door bars. 4-2-1 after market headers. Custom made 2.5" exhaust with magna flow dual tip muffler. Megan street series coilovers. Megan Ruca's. Cut and shortened knuckles with 2000 Infiniti i30 tie rods. KAAZ 2 way. Drag Dr31's 17x9 +17 &17x9 +28 running 20mm bolt on spacers. f1 spec driver bucket seat. Stock se s14 passenger seat. Power everything. Ice cold a/c and hot heater. 6k HID's. Car is pretty much drift ready. Drove it at asb (all star bash) and had zero problems! Only con is that my valve seals are donezoes so it smokes after sitting at idle. Call/text 7142326630 and I'll send you some pics. I'll post pics on the thread once I get home from work. Thanks for looking! currently has a magna flow muffler welded on instead of a full blast pipe. Last edited by lejeffrey12; 10-30-2014 at 02:49 AM..