AZ FS:1996 240SX S14 SE WITH S13 SR20DET SWAP 62K~ISH MILES **lots of Pics** - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gbiker · 10-27-2013, 08:11 PM

I have to sell my 1996 240sx. As you can tell, I have put a lot of money into this thing. When I got it was a wreck. The guy had destroyed the car however; it did have the sr20 a clean title with only 60k miles on it. I snagged it and started my build. I did everything paint, body, pulled the motor etc. This thing is not perfect at all. It is made to be driven and enjoyed not to be a show car. You could drift it if you wanted too however, I like driving fast more. Currently the car has everything hooked up and only needs a belt and a custom made line because the s13 motor and s14 body. Once those 2 items are installed it has full AC and heat (AZ Car used to live in Tucson). I am taking the car down again to have something worked on at the shop that built it SPS auto sports. The rear panels that are missing in the interior will be installed as well as the underside of the hood will match the engine bay. I will also touch up some things as best I can.

I tired to go factory everything or high-end parts. The only thing I didn’t do right is the seats because I ran out of money and time. I may have the shop put in factory seats cause the ones in it right now are so tall its hard to drive.

The cluster does not match mileage that is said on title and in the info because the old cluster broke and I replaced a new one.

Anyways, on to the list of parts and things I have done:

Nardi Wheel
NRG quick release
Alpine double din deck
Custom trunk / sub
JL sub
Alpine Amp
Can’t remember what speakers however they are all there.
No crack dash
Power FC
AEM boost controller and gauge
Innovate wide band
Suede roof and door inserts.
Corbeau seats with racecraft harnesses
Cant remember brand of Harness bar think its NRG could be wrong
Nismo shift knob
Nismo mats
True Nismo Wheels LMGT1s
Optima Battery New
New Air filter 4”
Greddy Intake
New Intercooler piping
New wiring harness
Brembo Evo front breaks
Brembo rotors front and rear
Z32 diff
It has stock fan and fan shroud (keeps it cool the best in AZ electric suck)
Setrab Oil cooler and oil filter relocated
Need speed sensor
Skiline ebrake line
Rebuild the rear e-brakes with new pads and everything
Aeromotive FPR gauge
Samco Blue radiator hoses
Gold Pulley Kit
NRG fender kit
Coolent overflow tank
New valve cover gaskets
New painted cover
Stainless clutch lines
New Clutch – Clutch Masters stage 3
Nismo Power Brace
ISIS large oil pan
S15 turbo
550cc inject
PBM coils
Stance Arms upper and lower
Solid bushings
Solid diff bushings
Jdm s14 kouki rear bumper valances
New Rear Hubs
Full trunk panels
Full 3” exhaust
Hid Headlights
Clear lens
Clear corners
Hid interior light
Hid bulbs in dash
Greddy engine brace

There is probably more I just cant remember it. Email me ([email protected] [email protected]) with questions pm me txt me 520-370-3249.

I am looking to sell. Need to pay off my truck and some other bills. Not looking to trade unless its in my favor. Anyways, I would like to try and get 14k OR BEST OFFER! SO, if you have a offer make it. I can deliver the car for a small fee anywhere west cost.

gbiker · 10-27-2013, 08:12 PM

Silentoreo34 · 10-27-2013, 10:08 PM

Nice car, people take notes! Hopefully someone doesn't ask for pics. GLWS

AGS · 10-27-2013, 10:14 PM

Finished Beauty. Good job. the grill kills me tho x(

gbiker · 10-28-2013, 05:35 PM

Quote:

Originally Posted by AGS

Finished Beauty. Good job. the grill kills me tho x(

What do you mean? Do like the JDM?

AGS · 10-29-2013, 06:07 PM

Quote:

Originally Posted by gbiker

What do you mean? Do like the JDM?

Never cared much for the silvia grill. I prefer the 95 or 96 oem grill over the silvia and navan.(i love navan kit tho)

gbiker · 10-30-2013, 09:32 PM

Anyone interested?? Bump

gbiker · 11-13-2013, 05:13 PM

last bump before i repost

canasion35 · 11-14-2013, 01:05 AM

Help this man pay off his 6.7!! I have one and im still paying her off ;(

Tomeis15 · 11-14-2013, 10:36 AM

Sick as fuck bro seen a video of it on Youtube looking fresh 👍

gbiker · 12-18-2013, 10:11 AM

Quote:

Originally Posted by Tomeis15

Sick as fuck bro seen a video of it on Youtube looking fresh 👍

yea dude this thing is stupid clean i have way over 20k into it and the market is crap. So, my lost your gain. i need offers people. Its says Best offer!!! hahaha

gbiker · 12-22-2013, 05:25 PM

keep getting questions about the build of the car

here you go

http://zilvia.net/f/builds-builds-on...lots-pics.html

s0fa king · 12-22-2013, 06:41 PM

to me the rubber trim around the intercooler holes says a lot. GL dude!

10-27-2013, 08:11 PM	#1
gbiker Leaky Injector Join Date: Sep 2011 Location: Arizona Posts: 74 Trader Rating: (9) Feedback Score: 9 reviews	FS:1996 240SX S14 SE WITH S13 SR20DET SWAP 62K~ISH MILES lots of Pics I have to sell my 1996 240sx. As you can tell, I have put a lot of money into this thing. When I got it was a wreck. The guy had destroyed the car however; it did have the sr20 a clean title with only 60k miles on it. I snagged it and started my build. I did everything paint, body, pulled the motor etc. This thing is not perfect at all. It is made to be driven and enjoyed not to be a show car. You could drift it if you wanted too however, I like driving fast more. Currently the car has everything hooked up and only needs a belt and a custom made line because the s13 motor and s14 body. Once those 2 items are installed it has full AC and heat (AZ Car used to live in Tucson). I am taking the car down again to have something worked on at the shop that built it SPS auto sports. The rear panels that are missing in the interior will be installed as well as the underside of the hood will match the engine bay. I will also touch up some things as best I can. I tired to go factory everything or high-end parts. The only thing I didn’t do right is the seats because I ran out of money and time. I may have the shop put in factory seats cause the ones in it right now are so tall its hard to drive. The cluster does not match mileage that is said on title and in the info because the old cluster broke and I replaced a new one. Anyways, on to the list of parts and things I have done: Nardi Wheel NRG quick release Alpine double din deck Custom trunk / sub JL sub Alpine Amp Can’t remember what speakers however they are all there. No crack dash Power FC AEM boost controller and gauge Innovate wide band Suede roof and door inserts. Corbeau seats with racecraft harnesses Cant remember brand of Harness bar think its NRG could be wrong Nismo shift knob Nismo mats True Nismo Wheels LMGT1s Optima Battery New New Air filter 4” Greddy Intake New Intercooler piping New wiring harness Brembo Evo front breaks Brembo rotors front and rear Z32 diff It has stock fan and fan shroud (keeps it cool the best in AZ electric suck) Setrab Oil cooler and oil filter relocated Need speed sensor Skiline ebrake line Rebuild the rear e-brakes with new pads and everything Aeromotive FPR gauge Samco Blue radiator hoses Gold Pulley Kit NRG fender kit Coolent overflow tank New valve cover gaskets New painted cover Stainless clutch lines New Clutch – Clutch Masters stage 3 Nismo Power Brace ISIS large oil pan S15 turbo 550cc inject PBM coils Stance Arms upper and lower Solid bushings Solid diff bushings Jdm s14 kouki rear bumper valances New Rear Hubs Full trunk panels Full 3” exhaust Hid Headlights Clear lens Clear corners Hid interior light Hid bulbs in dash Greddy engine brace There is probably more I just cant remember it. Email me ([email protected] [email protected]) with questions pm me txt me 520-370-3249. I am looking to sell. Need to pay off my truck and some other bills. Not looking to trade unless its in my favor. Anyways, I would like to try and get 14k OR BEST OFFER! SO, if you have a offer make it. I can deliver the car for a small fee anywhere west cost. __________________ 1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub. Last edited by gbiker; 03-02-2014 at 06:51 PM..

10-27-2013, 08:12 PM	#2
gbiker Leaky Injector Join Date: Sep 2011 Location: Arizona Posts: 74 Trader Rating: (9) Feedback Score: 9 reviews	__________________ 1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub.

10-30-2013, 09:32 PM	#7
gbiker Leaky Injector Join Date: Sep 2011 Location: Arizona Posts: 74 Trader Rating: (9) Feedback Score: 9 reviews	Anyone interested?? Bump __________________ 1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub.

11-13-2013, 05:13 PM	#8
gbiker Leaky Injector Join Date: Sep 2011 Location: Arizona Posts: 74 Trader Rating: (9) Feedback Score: 9 reviews	last bump before i repost __________________ 1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub.

11-14-2013, 01:05 AM	#9
canasion35 Zilvia Junkie Join Date: May 2011 Location: Houston, tx Posts: 328 Trader Rating: (0) Feedback Score: 0 reviews	Help this man pay off his 6.7!! I have one and im still paying her off ;( __________________ R.I.P Joe Alverez You will never be forgotten "Sky Zero"

10-27-2013, 10:08 PM	#3
Silentoreo34 Zilvia Addict Join Date: Dec 2010 Location: Phoenix, AZ Age: 33 Posts: 630 Trader Rating: (28) Feedback Score: 28 reviews	Nice car, people take notes! Hopefully someone doesn't ask for pics. GLWS

10-27-2013, 10:14 PM	#4
AGS Zilvia Member Join Date: Oct 2012 Location: hayward Posts: 218 Trader Rating: (2) Feedback Score: 2 reviews	Finished Beauty. Good job. the grill kills me tho x(

11-14-2013, 10:36 AM	#10
Tomeis15 Leaky Injector Join Date: Sep 2013 Location: Los ángeles Age: 44 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	Sick as fuck bro seen a video of it on Youtube looking fresh 👍

12-22-2013, 05:25 PM	#12
gbiker Leaky Injector Join Date: Sep 2011 Location: Arizona Posts: 74 Trader Rating: (9) Feedback Score: 9 reviews	keep getting questions about the build of the car here you go http://zilvia.net/f/builds-builds-on...lots-pics.html __________________ 1996 240sx se s13 SR20det, Power JC, Greedy Intake Manifold, ISIS large oil pan, Oil cooler re-locator, S15 turbo, 550cc inject, PBM coils, Stance Arms, Solid bushings, Nismo 2 way diff, Brembo brakes front, Z32 rears, Nismo LMGT1's, Corbeau seats, Alpine double din, JL sub.

12-22-2013, 06:41 PM	#13
s0fa king Zilvia Addict Join Date: May 2009 Location: earth Posts: 755 Trader Rating: (7) Feedback Score: 7 reviews	to me the rubber trim around the intercooler holes says a lot. GL dude!