TX Haltech Platinum Sport 2000 standalone ECU & more

[roadbuster]

Whole Haltech standalone package for $1600 total:

-USED Haltech Sport 2000 (HT-051400) which includes a used air intake temp sensor
-NEW Haltech dual channel wideband controller with 1 new O2 sensor (HT-010704) & NEW Haltech dual wideband Red display gauge (HT-012006)
-NEW Sport 2000 Autospec Flying Lead Loom Only (HT-041402)

All of this would normally cost over $2300 new. I used the Sport 2000 for 6 months on my garaged car & then stored it indoors. The wideband was always stored indoors & was never used; only the O2 bung plug was taken out which I will replace.

If you don't need the loom, the total price would be $1400 for EMS+wideband. If you don't need the wideband O2, the total price would be $1400 for EMS+loom.

[s15ca]

will this work for a s15 spec r

[roadbuster]

Originally Posted by s15ca

will this work for a s15 spec r

Probably, but you would need to buy a Haltech patch harness (if they make one compatible with the S15 & Sport 2000 - not sure) or buy a custom s15 engine harness from Wiring Specialties made to plug into the Haltech.

[jr_ss]

Originally Posted by s15ca

will this work for a s15 spec r

Not to ruin a possible sale, but they make a PnP Haltech for the S15.

[240boosted]

wish I could use this in my sr20det for my s13

[hanzbrady]

Originally Posted by 240boosted

wish I could use this in my sr20det for my s13

You can......

[roadbuster]

Originally Posted by 240boosted

wish I could use this in my sr20det for my s13

You can...The easiest way would be with a Haltech patch harness for S13 SR20DET that connects to a working Nissan OEM S13 SR20DET engine harness. I could include a Haltech S13 SR patch harness in one of the packages above for $300 extra (they retail for over $400).

Yes, there are plug & play versions of the Haltech sport ecu's for S13 & S15 SR20DET's for not much less than what I am trying to sell, but with the Sport 2000, you can run other engines with more cylinders later down the line like 2JZ's, RB's, or even LS' since it has more inputs and outputs than the plug & play versions. How you ask?

1. With other patch harnesses that interface to the OEM engine harnesses (usually between $400-500)
2. With Haltech or other brand harnesses made for the specific engine (usually in the $1000 range)
3. With attempting to make a new harness from the Haltech long lead universal loom I am trying sell.

[roadbuster]

bump