KA24E with DIYPNP Megasquirt - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TupperWare · 04-21-2018, 09:00 PM

I don't know how many people here have ran a Megasquirt ecu. But I'm having an issue with mine. I got mine assembled by a friend and I've confirmed all the jumper wire and they're correct. I put power to the ecu outside of the car and the computer detects it, I put it in the car turn on power and nothing. There was a missing wire for the ECCS relay. Input pin 4 to output pin 36, I've done this jump and the ecu still does not turn on. When I did the jump wire from 4 to 36 it's still on the adapter board, I don't see anywhere to put it on the main board.

TupperWare · 04-29-2018, 01:48 AM

Bump, I still haven't been able to figure out this problem. I've jumped the relay with the ECU installed and the fuel pump works fine.

04-21-2018, 09:00 PM	#1
TupperWare Join Date: Mar 2015 Location: Oregon Age: 24 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	KA24E with DIYPNP Megasquirt I don't know how many people here have ran a Megasquirt ecu. But I'm having an issue with mine. I got mine assembled by a friend and I've confirmed all the jumper wire and they're correct. I put power to the ecu outside of the car and the computer detects it, I put it in the car turn on power and nothing. There was a missing wire for the ECCS relay. Input pin 4 to output pin 36, I've done this jump and the ecu still does not turn on. When I did the jump wire from 4 to 36 it's still on the adapter board, I don't see anywhere to put it on the main board.

04-29-2018, 01:48 AM	#2
TupperWare Join Date: Mar 2015 Location: Oregon Age: 24 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Bump, I still haven't been able to figure out this problem. I've jumped the relay with the ECU installed and the fuel pump works fine.