SR20 Ecu Causing My Problems??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dogg4217 · 01-26-2009, 06:58 PM

I posted a thread awhile ago about my 93 240sx w/s13 SR20 swap. I was having problems with the car not cutting off and not revving past 2500rpm.

I read and people said that not revving past 2500rpm was caused my the MAF. So I got a SR20 maf from a known running car. Swapped it into my car and I still have the same problem. Check all the wiring and same problem.

So I focus on the car not cutting off problem even after you take the key out of the ignition and cut the battery switch off. I tripled checked all my wiring and checked all relays in the engine bay and everything checked out ok.

Before the swap I was just gathering info an reading up on Nissans, since I am use to Honda's and Jeep's. I read about the E5 ecu having a common problem of the ign circuit blowing up in the ecu. That it would burn up a piece of the circuit if there was a short somewhere in the engine bay. I got the swap from a wrecked car so I popped open the ecu and saw the blown circuit.

I work at a occupation that deals with circuit boards and electronics, so I got a tech to redo the circuit. However this did not fix the problem. I still have those two problems.

So tonight I pull the ecu out. Turn the car to ON, everything comes on power wise. Turn the key to OFF and everything turns off. So I am thinking that the ecu was the cause of my two problems. The car not reving past 2500rpm and the car not cutting off with the key.

I also tried to see if the ecu was throwing any codes and the LED never blinked or came on.

So I am thinking the ecu is the problem.

Has anyone experienced this can I assume 100% that the ecu is my problem? I might be able to swap my ecu into another sr20 car on Saturday to answer my questions, but I wanted to see if this a known problem.

Thanks.

01-26-2009, 06:58 PM	#1
dogg4217 Leaky Injector Join Date: Jul 2007 Location: Virginia Age: 42 Posts: 90 Trader Rating: (0) Feedback Score: 0 reviews	SR20 Ecu Causing My Problems??? I posted a thread awhile ago about my 93 240sx w/s13 SR20 swap. I was having problems with the car not cutting off and not revving past 2500rpm. I read and people said that not revving past 2500rpm was caused my the MAF. So I got a SR20 maf from a known running car. Swapped it into my car and I still have the same problem. Check all the wiring and same problem. So I focus on the car not cutting off problem even after you take the key out of the ignition and cut the battery switch off. I tripled checked all my wiring and checked all relays in the engine bay and everything checked out ok. Before the swap I was just gathering info an reading up on Nissans, since I am use to Honda's and Jeep's. I read about the E5 ecu having a common problem of the ign circuit blowing up in the ecu. That it would burn up a piece of the circuit if there was a short somewhere in the engine bay. I got the swap from a wrecked car so I popped open the ecu and saw the blown circuit. I work at a occupation that deals with circuit boards and electronics, so I got a tech to redo the circuit. However this did not fix the problem. I still have those two problems. So tonight I pull the ecu out. Turn the car to ON, everything comes on power wise. Turn the key to OFF and everything turns off. So I am thinking that the ecu was the cause of my two problems. The car not reving past 2500rpm and the car not cutting off with the key. I also tried to see if the ecu was throwing any codes and the LED never blinked or came on. So I am thinking the ecu is the problem. Has anyone experienced this can I assume 100% that the ecu is my problem? I might be able to swap my ecu into another sr20 car on Saturday to answer my questions, but I wanted to see if this a known problem. Thanks.