|
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
10-17-2017, 12:46 AM | #1 |
Zilvia Addict
Join Date: Jan 2008
Location: San Diego
Age: 34
Posts: 712
Trader Rating: (2)
Feedback Score: 2 reviews
|
S13 Radio Bezel Insert for DIN 3 Gauge Mount
Hey Gang,
I have for sale a 3-Gauge Holder plate that is inserted into the S13 Radio bezel. It can support 3 x 52mm gauges with maximum gauge bezel size of 55.5mm. (I used VDO Vision Black which are 51.5mm with a 55mm face bezel) What you get: - 1/4 inch plate with 3 x 52mm holes cut out for gauges - piece of micro suede to cover the plate to give a great finish. Installation: - Modify the plate for your project (cut out hole for your deck, add more holes for some switches or warning lights,etc.) - Use some spray adhesive, stretch on the finishing suede fabric and let dry. - Cut out the holes in the fabric for your accessories (see last picture for example of how I slot-cut the fabric to allow for gauges to fit in). - Trim the fabric at least 1/4 inches away from the perimeter of the insert-plate - Install the plate into the S13 Radio Bezel hole until the plate is flush with the trim. - Use some JB Weld, hot glue, tape, etc to hold the plate in place. Price: $75 Shipped Here is what it looks like when you install it using the micro-suede (3 Holes not shown in picture): Here is one I modified for my project: Last edited by Ilya; 10-17-2017 at 01:01 PM.. Reason: Changed hosting sites from photo-f-ucket |
Sponsored Links |
Bookmarks |
|
|