Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 01-08-2017, 07:49 PM   #20671
derass
Zilvia Addict
 
Join Date: Jun 2010
Location: Toronto, ON
Age: 29
Posts: 821
Trader Rating: (0)
derass is an unknown quantity at this point
Feedback Score: 0 reviews
There's an optional cold pipe to use the GReddy IM with an S13 FMIC kit.
derass is offline   Reply With Quote
Sponsored Links
Old 01-08-2017, 09:35 PM   #20672
cbcm2435
Zilvia Junkie
 
cbcm2435's Avatar
 
Join Date: May 2009
Location: Illinois
Age: 26
Posts: 351
Trader Rating: (0)
cbcm2435 is an unknown quantity at this point
Feedback Score: 0 reviews
What size are the bolts that attach the fan shroud to the radiator for a s13 sr?

Sent from my Z963VL using Tapatalk
cbcm2435 is offline   Reply With Quote
Old 01-08-2017, 10:45 PM   #20673
Habibi240
Zilvia Member
 
Habibi240's Avatar
 
Join Date: Aug 2015
Location: Chicago
Age: 24
Posts: 223
Trader Rating: (0)
Habibi240 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Habibi240 View Post
SR20DET IGNITION TIMING
!
Im in need of help. I would like to know every component that would alter setting ignition timing.
Took my car in to a known shop and had it gone over but in the amount of time he had he couldn't find the root cause.

mechanical timing is set perfect
s13 harmonic balancer on s14 block (only difference between s13/14 crank pulley is ribs for ps pump) timing marks are the same. so no issue there
zero boost leak
plugs gapped @ 30
370 injectors oem fpr
enthalpy tuned ecu and he told me to run 15*btc of course

when timing is set @ 15*btc it bogs and backfires
but when its slightly advanced it revs happy and runs great.
to get it set @ 15*btc the CAS was clocked all the way right
it should be in the middle of the adjustment window im aware of so its right around the middle now and it runs fine .



what should i look into changing ? only thing we could think of is water temp sensor and CAS?
Help me Im refusing to drive my car
Habibi240 is offline   Reply With Quote
Old 01-08-2017, 11:47 PM   #20674
cbcm2435
Zilvia Junkie
 
cbcm2435's Avatar
 
Join Date: May 2009
Location: Illinois
Age: 26
Posts: 351
Trader Rating: (0)
cbcm2435 is an unknown quantity at this point
Feedback Score: 0 reviews
Is your CAS set right with the cam? Where are you putting the clamp for the signal for the timing light?

Sent from my Z963VL using Tapatalk
cbcm2435 is offline   Reply With Quote
Old 01-09-2017, 10:45 AM   #20675
Nickvas81
 
Join Date: Aug 2016
Location: Virginia Beach
Posts: 12
Trader Rating: (0)
Nickvas81 is an unknown quantity at this point
Feedback Score: 0 reviews
Zenki foglight replacement lenses

I'm looking to repair or replace the lenses my fog lights which are cracked and missed pieces. I understand that an easy fix would be to just find used foglights (since they are no longer produced), but i dont know if it is the cheapest.

I've done quite a bit of searching for replacement lenses but did find a company that produces or sells them. Has anyone else found these?

Thanks.
Nickvas81 is offline   Reply With Quote
Old 01-10-2017, 02:42 PM   #20676
JrDarknes
Zilvia Member
 
JrDarknes's Avatar
 
Join Date: Jan 2013
Location: Indianapolis, IN
Age: 22
Posts: 248
Trader Rating: (4)
JrDarknes is an unknown quantity at this point
Feedback Score: 4 reviews
Anyone own or has owned a circuit sports or p2m fan controller? Just want to to know what color the display is. Aiming for nothing but red for my interior.
JrDarknes is offline   Reply With Quote
Old 01-10-2017, 02:59 PM   #20677
bmar19
Zilvia Junkie
 
Join Date: Jul 2013
Location: Broward
Posts: 548
Trader Rating: (4)
bmar19 is an unknown quantity at this point
Feedback Score: 4 reviews
Quote:
Originally Posted by JrDarknes View Post
Anyone own or has owned a circuit sports or p2m fan controller? Just want to to know what color the display is. Aiming for nothing but red for my interior.
It's red display

Sent from my LGMS631 using Tapatalk
bmar19 is offline   Reply With Quote
Old 01-10-2017, 03:29 PM   #20678
LoSt180
Zilvia Junkie
 
LoSt180's Avatar
 
Join Date: May 2013
Location: MD
Posts: 559
Trader Rating: (16)
LoSt180 is an unknown quantity at this point
Feedback Score: 16 reviews
Quote:
Originally Posted by Nickvas81 View Post
I'm looking to repair or replace the lenses my fog lights which are cracked and missed pieces. I understand that an easy fix would be to just find used foglights (since they are no longer produced), but i dont know if it is the cheapest.

I've done quite a bit of searching for replacement lenses but did find a company that produces or sells them. Has anyone else found these?

Thanks.
Best option is probably finding a set with broken housings but good lenses and merge them.
LoSt180 is offline   Reply With Quote
Old 01-12-2017, 01:18 PM   #20679
jared420sx
Zilvia Addict
 
jared420sx's Avatar
 
Join Date: Jan 2014
Location: Ny
Age: 20
Posts: 758
Trader Rating: (10)
jared420sx is an unknown quantity at this point
Feedback Score: 10 reviews
Opinions on kits that would look good accompanied with koguchi overs?
Gt1 is alright. Trying to figure out another option if i went with them.
jared420sx is online now   Reply With Quote
Old 01-12-2017, 01:43 PM   #20680
mau5trap
Premium Member
 
mau5trap's Avatar
 
Join Date: Dec 2009
Location: los ganjales///OC
Posts: 1,300
Trader Rating: (8)
mau5trap is an unknown quantity at this point
Feedback Score: 8 reviews
Send a message via AIM to mau5trap
Anyone know where I can get an adapter like this that's not "brass"

http://www.autometer.com/1-8-npt-to-...-pressure.html
__________________
mau5trap is offline   Reply With Quote
Old 01-12-2017, 01:49 PM   #20681
kashira kureijii
Zilvia FREAK!
 
kashira kureijii's Avatar
 
Join Date: Dec 2013
Location: nation of Texas
Age: 21
Posts: 1,259
Trader Rating: (4)
kashira kureijii is an unknown quantity at this point
Feedback Score: 4 reviews
Small Questions Thread (SEARCH FIRST! Use this instead of making NEW threads)

Quote:
Originally Posted by mau5trap View Post
Anyone know where I can get an adapter like this that's not "brass"

http://www.autometer.com/1-8-npt-to-...-pressure.html


I bought a pretty cool one off ebay that has both 1/8npt and 1/8 bspt so u can use your aftermarket op gauge and the idiot light in the cluster i dunno


https://www.ebay.com/itm/131836884304


Sent from my iPhone using Tapatalk
__________________
Quote:
Originally Posted by bigs View Post
Just get a big sticker that says "copyright infringement"
kashira kureijii is offline   Reply With Quote
Old 01-12-2017, 01:50 PM   #20682
e1_griego
Premium Member
 
e1_griego's Avatar
 
Join Date: Sep 2004
Location: Salem, OR
Age: 32
Posts: 2,352
Trader Rating: (21)
e1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of light
Feedback Score: 21 reviews
Quote:
Originally Posted by mau5trap View Post
Anyone know where I can get an adapter like this that's not "brass"

http://www.autometer.com/1-8-npt-to-...-pressure.html
http://www.jegs.com/i/Earls/361/968698/10002/-1
e1_griego is offline   Reply With Quote
Old 01-12-2017, 09:19 PM   #20683
mau5trap
Premium Member
 
mau5trap's Avatar
 
Join Date: Dec 2009
Location: los ganjales///OC
Posts: 1,300
Trader Rating: (8)
mau5trap is an unknown quantity at this point
Feedback Score: 8 reviews
Send a message via AIM to mau5trap
Quote:
Originally Posted by kashira kureijii View Post
I bought a pretty cool one off ebay that has both 1/8npt and 1/8 bspt so u can use your aftermarket op gauge and the idiot light in the cluster i dunno


https://www.ebay.com/itm/131836884304


Sent from my iPhone using Tapatalk
Quote:
Originally Posted by e1_griego View Post
Thanks guys!
__________________
mau5trap is offline   Reply With Quote
Old 01-12-2017, 11:54 PM   #20684
zo0d
Zilvia Member
 
zo0d's Avatar
 
Join Date: Apr 2008
Location: New Jersey
Age: 27
Posts: 253
Trader Rating: (1)
zo0d is on a distinguished road
Feedback Score: 1 reviews
Trying to replace the wiper linkage on my S14. The entire bolt keeps spinning when I try to losen the nut. There is no room to grab it from underneath with pliers. Will I need to cut or drill the bolts/nuts out? Thanks

zo0d is offline   Reply With Quote
Old 01-13-2017, 12:11 PM   #20685
1on1
Post Whore!
 
1on1's Avatar
 
Join Date: Aug 2005
Location: San Diego
Posts: 3,094
Trader Rating: (15)
1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all
Feedback Score: 15 reviews
Send a message via AIM to 1on1
I've searched online and there are a lot of discussions about the final drives but not a solid answer that I am looking for.

Are all r200 diff final drive the same and can be swapped out? I'm looking into gathering the z33/g35 diff and axles and wondering if I can swap out the final drive for a 4.6 FD from an xterra.
__________________
instagram
1on1 is offline   Reply With Quote
Old 01-13-2017, 01:44 PM   #20686
VNG704
Zilvia FREAK!
 
VNG704's Avatar
 
Join Date: Dec 2008
Location: Wisconsin
Posts: 1,551
Trader Rating: (17)
VNG704 is an unknown quantity at this point
Feedback Score: 17 reviews
Quote:
Originally Posted by zo0d View Post
Trying to replace the wiper linkage on my S14. The entire bolt keeps spinning when I try to losen the nut. There is no room to grab it from underneath with pliers. Will I need to cut or drill the bolts/nuts out? Thanks
try penetrate oil, maybe an impact driver, all else fails, cut it off.
VNG704 is offline   Reply With Quote
Old 01-13-2017, 11:07 PM   #20687
mau5trap
Premium Member
 
mau5trap's Avatar
 
Join Date: Dec 2009
Location: los ganjales///OC
Posts: 1,300
Trader Rating: (8)
mau5trap is an unknown quantity at this point
Feedback Score: 8 reviews
Send a message via AIM to mau5trap
KA24DE Oil Pump Question:

Would it better to just buy a whole new Complete Cover Timing Chain Assembly....

Or just replace the Oil Pump Gear + Oil Pump Valve Relief Assembly, and it'll be good as new?

thanks in advance.

__________________
mau5trap is offline   Reply With Quote
Old 01-14-2017, 02:02 PM   #20688
chingon
Leaky Injector
 
Join Date: Aug 2004
Location: el paso tx
Posts: 110
Trader Rating: (1)
chingon is an unknown quantity at this point
Feedback Score: 1 reviews
Q45 DIFF (97) into s13

A few questions, I have s13 pumpkin and q45 pumpkin (97)

I want q45 gears. Can I swap gear sets w/o issue (heard something about pinion spacers being required)? (I have s15 lsd going in so I know about bolt differences)

Can I swap input flanges between them?

If I keep q45 flange, will it rub against sway bar?
chingon is offline   Reply With Quote
Old 01-16-2017, 11:03 AM   #20689
STEEZxIT
Zilvia FREAK!
 
STEEZxIT's Avatar
 
Join Date: Oct 2009
Location: socal, man!
Posts: 1,219
Trader Rating: (10)
STEEZxIT is an unknown quantity at this point
Feedback Score: 10 reviews
anybody running r32 gtr brakes on their s14, and wouldn't mind me bugging you with questions?
just picked up a set while i was in JP for a bit
__________________
@dangerdamian
STEEZxIT is offline   Reply With Quote
Old 01-16-2017, 02:18 PM   #20690
1on1
Post Whore!
 
1on1's Avatar
 
Join Date: Aug 2005
Location: San Diego
Posts: 3,094
Trader Rating: (15)
1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all1on1 is a name known to all
Feedback Score: 15 reviews
Send a message via AIM to 1on1
Quote:
Originally Posted by STEEZxIT View Post
anybody running r32 gtr brakes on their s14, and wouldn't mind me bugging you with questions?
just picked up a set while i was in JP for a bit
No experience but from reading this thread you need the correct rotors for the front and the rears are identical to z32 + can use z32 ebrake system:

http://www.240sxforums.com/forums/s1...ml#post1691905
__________________
instagram
1on1 is offline   Reply With Quote
Old 01-16-2017, 02:53 PM   #20691
STEEZxIT
Zilvia FREAK!
 
STEEZxIT's Avatar
 
Join Date: Oct 2009
Location: socal, man!
Posts: 1,219
Trader Rating: (10)
STEEZxIT is an unknown quantity at this point
Feedback Score: 10 reviews
Quote:
Originally Posted by 1on1 View Post
No experience but from reading this thread you need the correct rotors for the front and the rears are identical to z32 + can use z32 ebrake system:

http://www.240sxforums.com/forums/s1...ml#post1691905

thank you, good info! i remember reading that elsewhere as well.

i had also found this thread with some good info;

http://zilvia.net/f/showthread.php?t=117194

just didn't want to bump it due to it's age and it being unlikely that the posting members would still be active on here, over a decade later. (though i did pm one out of optimism.)

more specifically, does anyone know if the set up is the same with z32 rear brakes, if you still need to run the entire drum assembly? i don't know where i came under the impression that you could simply bolt them up the way the stock brakes are configured on the s14 and still have a working ebrake.
__________________
@dangerdamian
STEEZxIT is offline   Reply With Quote
Old 01-16-2017, 03:04 PM   #20692
e1_griego
Premium Member
 
e1_griego's Avatar
 
Join Date: Sep 2004
Location: Salem, OR
Age: 32
Posts: 2,352
Trader Rating: (21)
e1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of lighte1_griego is a glorious beacon of light
Feedback Score: 21 reviews
R32 and z32 are the same in the back, so yes, you need the drum ebrake if you want it to work.
e1_griego is offline   Reply With Quote
Old 01-18-2017, 11:12 PM   #20693
Hoffman5982
Nissanaholic!
 
Hoffman5982's Avatar
 
Join Date: Jan 2009
Location: Definitely NOT FL....
Age: 25
Posts: 1,990
Trader Rating: (21)
Hoffman5982 is an unknown quantity at this point
Feedback Score: 21 reviews
Quote:
Originally Posted by cbcm2435 View Post
What size are the bolts that attach the fan shroud to the radiator for a s13 sr?

Sent from my Z963VL using Tapatalk
m6 x 1.0


Does anyone know where I can get that "cup holder" for 96+ s14 center consoles? It's literally just a flat piece of plastic that inserts into the slits that the 96+ center consoles have on them. I use to see them everywhere, now no amount of google searching will bring them up.
__________________
Hoffman5982 is offline   Reply With Quote
Old 01-18-2017, 11:18 PM   #20694
lunchmeat
Zilvia Addict
 
lunchmeat's Avatar
 
Join Date: Apr 2016
Location: Southaven, ms
Age: 38
Posts: 695
Trader Rating: (0)
lunchmeat is an unknown quantity at this point
Feedback Score: 0 reviews
This maybe?
http://zilvia.net/f/showthread.php?t=639693
lunchmeat is online now   Reply With Quote
Old 01-18-2017, 11:18 PM   #20695
Hoffman5982
Nissanaholic!
 
Hoffman5982's Avatar
 
Join Date: Jan 2009
Location: Definitely NOT FL....
Age: 25
Posts: 1,990
Trader Rating: (21)
Hoffman5982 is an unknown quantity at this point
Feedback Score: 21 reviews
Quote:
Originally Posted by cbcm2435 View Post
What size are the bolts that attach the fan shroud to the radiator for a s13 sr?

Sent from my Z963VL using Tapatalk
m6 x 1.0


Does anyone know where I can get that "cup holder" for 96+ s14 center consoles? It's literally just a flat piece of plastic that inserts into the slits that the 96+ center consoles have on them. I use to see them everywhere, now no amount of google searching will bring them up.
__________________
Hoffman5982 is offline   Reply With Quote
Old 01-19-2017, 04:39 AM   #20696
I'm Redline
Zilvia Addict
 
I'm Redline's Avatar
 
Join Date: Mar 2012
Location: Upper Mid TN
Posts: 781
Trader Rating: (0)
I'm Redline is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Hoffman5982 View Post
m6 x 1.0


Does anyone know where I can get that "cup holder" for 96+ s14 center consoles? It's literally just a flat piece of plastic that inserts into the slits that the 96+ center consoles have on them. I use to see them everywhere, now no amount of google searching will bring them up.
http://www.ebay.com/itm/S14-1994-199...9Uxfwj&vxp=mtr
__________________
1996 Zenki 'Baraketsu Tenshi', Burst Angel
My work in progress...
I'm Redline is offline   Reply With Quote
Old 01-19-2017, 01:28 PM   #20697
Hoffman5982
Nissanaholic!
 
Hoffman5982's Avatar
 
Join Date: Jan 2009
Location: Definitely NOT FL....
Age: 25
Posts: 1,990
Trader Rating: (21)
Hoffman5982 is an unknown quantity at this point
Feedback Score: 21 reviews
Sorry for the double post. And no, this is actually what I was talking about

http://www.frsport.com/Nissan-96931-..._p_770010.html
__________________
Hoffman5982 is offline   Reply With Quote
Old 01-19-2017, 02:09 PM   #20698
blksylv
Premium Member
 
blksylv's Avatar
 
Join Date: Nov 2007
Location: bumfuck VA
Posts: 1,681
Trader Rating: (31)
blksylv is an unknown quantity at this point
Feedback Score: 31 reviews
I just made one out of abs plastic for mines lol
__________________
Quote:
Originally Posted by ixfxi View Post
there is nothing wrong with enjoying the build. however, we sometimes have to remind ourselves that the build is only one part of the puzzle, and that ultimately - enjoying and driving the car is the number one priority.
blksylv is online now   Reply With Quote
Old 01-19-2017, 05:27 PM   #20699
juhd
Zilvia Junkie
 
Join Date: Sep 2012
Location: Paradise Hills, San Diego
Age: 22
Posts: 512
Trader Rating: (9)
juhd is an unknown quantity at this point
Feedback Score: 9 reviews
are q45 brake calipers able to clear wheels with low disk/super low disk faces without a spacer?
__________________
Instagram:@juhd_
juhd is offline   Reply With Quote
Old 01-19-2017, 10:42 PM   #20700
DailySX
 
Join Date: Feb 2016
Location: Cali
Posts: 6
Trader Rating: (0)
DailySX is an unknown quantity at this point
Feedback Score: 0 reviews
I have a bit of an odd/silly question: Does it matter what type of bolt I use to replace the old rusted/rounded ones? As in, can I just drop by a local Homedepot and get what I need? Or are the screws and bolts on the 240 "special" in anyway (plating/grade/etc.)?

It shouldn't matter too much, right?
DailySX is offline   Reply With Quote
Reply

Bookmarks

Tags
180sx type x kouki, 1jz, 2jz, 300zx, clutch, faq, ka24de, n/a, non-turbo, question, redtop s13 180sx silvia, s14, search, solenoid, starter, z32, zenki


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vB.Sponsors
Copyright © 1998 - 2015, Zilvia.net™