|
|
|||||||
| For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
 |
|
|
Thread Tools | Display Modes |
02-25-2012, 01:40 AM
|
#1 |
|
Nissanaholic!
 Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
  Feedback Score: 18 reviews
|
ALOT of 240sx and 350z aftermarket and oem parts...COME GET IT! CHEAP AS F&%$!!!!!
Cleaning out alot of stuff since Im in the middle of another build. Prices have been lowered since the last thread and are as low as they are going to go...if you don't like my prices, GTFO!
Mazworx SR20DET Head - ~3k Miles on Head New SR20DET Head- $400 Stage 2 Port and Polish- $800 Polished Combustion Chamber- $210 Full Radius Valve job- $200 Tomei Intake Cam Gear- $200 HKS Exhaust Cam Gear- $200 Tomei 270 Cams- $600 Brian Crower Springs and Titanium Retainers- $220 HKS Rocker Arm Stoppers- $100 New Rocker Arms- $150 TOTAL- $3080 OPTION 1- $2,500 - for everything listed above OPTION 2- $1,250 - Head minus rocker arms, rocker arm stoppers, cams, cam gears (keep the machined head and valve train) PHOTOS:     Cam Angle Sensor - ~3k Miles (purchased brand new) - PERFECT SHAPE! - $225 Powder Coated S13 Valve Cover - PERFECT SHAPE! - $150 Greddy Oil Cap - PERFECT SHAPE! - $55 SR20 ARP Head Studs - PERFECT SHAPE - ~3k Miles - $100 TurboSmart Megasonic Blow Off Valve - ~1-2k miles - $100  Kisuu Custom Made Fuel Rail - NEVER USED - $100  KU Engineering Intake Manifold - Never Used (just sitting around for about 3yrs, but the last owner drilled injector port 1 larger to put larger injectors in but then sold it to me...costs about 60 to do it to the other 3 or 40 to correct port 1) - $200  Origin Canards w/ custom aluminum skid plates - never used - $125  S13 SR Coil Pack Cover - SOLD! - Used - $30  SR20 Upper Oil Pan (2) SR20 Oil Pump (1) SR20 Oil Screens (2 sets) SR20 Rear Crank Case Cover (3) SR20 Oil Block Galley w/ Sensor (2)  Unknown Brand BOV - Slightly Used - PERFECT SHAPE - $50 SR20 OEM Water Pump Pulley - SOLD! - Great Shape - $10  S14 SR20 88.5mm Cometic Metal Head Gasket multilayer - NEVER USED - PERFECT SHAPE - $60  SR Main Cap Girdle - PERFECT SHAPE - $15 each  SR Coolant Tubes - PERFECT SHAPE - $5 each  S13 OEM Rear Suspension ALL SOLD!- - PERFECT SHAPE - $10 per set  OEM SR20VE P11 Valvetrain (IN+EX Valves, Springs, Cams, Gears) - 15,000 Miles - PERFECT! - MAKE OFFERS ON WHAT YOU NEED!  Evo VIII MR Shift Knob - PERFECT SHAPE - $20  SR20DET AAC Valve (1 NEW /1 USED) - PERFECT SHAPE -NEW- $110 - SOLD! -USED- $75  stock KA24de airbox intake system and Filter is still clean (came from a 98' kouki) - PERFECT SHAPE - $75  Fuse Relocation Setup - PERFECT SHAPE - $30  S13 Non-ABS Driveshaft - Used - $100 S13 SR Transmision - - Roughly 30k miles - PERFECT SHAPE - $150 (2) Water Pump - Great Shape - $30 SR20 Coilpack Gaskets - NEW - $3 each  (8) SR OEM Rocker Arm (1 Set) - Used - $5 each  (16) OEM Spring, Retainer, and Keeper (1 set) (8) SR OEM Intake Valves (1 set) (8) SR OEM Exhaust Valves (1 set) (8) SR OEM Lifter (1 Set) - Used - $5 Each  SR Block (bare) w/ 87mm bore (needs align bore...roughly 200 at any machine shop) - $50  (3) SR OEM Rod - Great Shape - $10 each  SR OEM Exhaust Manifold w/ Heat Shield - Perfect Shape - $40  SR Transmission Flex Plate - SOLD! - Perfect Shape - $15  Mr. Gasket (Copper) sr20det Other sr20det Exhaust Gaskets (t3, T4, Exhaust mani - Perfect Shape - $15  Crank Pulley Bolts (2) -Perfect Shape -$5  Z32 Slave Cylinder - SOLD! -Perfect Shape -$10  Transmission Brackets - Perfect Shape - Make Offer  Drivers Side Engine Mount w/ Bracket - SOLD! - Perfect Shape - $25  Alternator Brackets - Perfect Shape - Make Offer  Knock Sensor (4)...one doesn't have a sub-harness - Perfect Shape -$30 each (15 for the one without the sub-harness)  S13 Front Lower Control Arm - Perfect Shape - $40  Thermostat Housing- $10 Coolant Temp. Sensor Housing- $10 Coolant Inlet/Outlet- $10 Each  350z StopTech Front BBK (was going to use them on my new build but im going with something else now. This setup retials for around $3,000) 6-Piston Front with 2-Piece Rotors - ~5k miles - $2,000  350z LSD - ~15k miles - $400  350z Master 1 1/16th - Perfect Shape - $60  350z Brake Booster - Perfect Shape - $125  350z 03' tinted tail lights - Great shape - $100  350z OEM Fuel Tank - ~20k miles - Perfect Shape - $100  350z Stoptech floating 355x32mm AeroRotors - ~3k miles - $250  350z Parts - Clutch/Brake Pedal - E-brake Setup - OEM Suspension Arms  350z Seats - ~20k miles - $300  350z oem Radiator - ~20k miles - $100  350z oem Radiator Support - ~20k miles - $100  These are all the make an offer items...i dont want or need them so just make an offer...pictures of these upon request. (1) V1 Godspeed S13 Toe Arm (1) V1 Godspeed S13 Traction Rod (2) Cam Oil Tubes (1 Set) (3) Different SR20 Timing Chain Guides 3” S14 Exhaust that was very hacked up but it has a Very good condition HKS muffler stock KA24de header + stock heatsheild Thank You For Looking!
__________________
https://instagram.com/eck_matthew/ Last edited by Imarvin240; 02-29-2012 at 03:15 AM.. |
|
|
| Sponsored Links |
|
02-28-2012, 08:06 AM
|
#7 |
|
Zilvia FREAK!
 
|
great stuff
bump
__________________
cONtRol FReAkS |
|
|
|
|
02-29-2012, 01:18 PM
|
#9 |
|
Zilvia Junkie
 Join Date: Feb 2009
Location: Walton, Kentucky
Age: 33
Posts: 545
Trader Rating: (6)
Feedback Score: 6 reviews
|
Price on the non painted upper oil pan to 41094?
__________________
My Website | Unfriendly Garage | Endurance Motorsports | FitMyWheels - Fitment Calculator |
|
|
|
|
03-01-2012, 12:06 PM
|
#10 | |
|
Nissanaholic!
Join Date: Dec 2010
Location: king of prussia, PA!
Posts: 1,721
Trader Rating: (18)
Feedback Score: 18 reviews
|
Quote:
__________________
https://instagram.com/eck_matthew/ |
|
|
|
|
|
03-01-2012, 01:21 PM
|
#12 | |
|
Zilvia Addict
 
Join Date: Jun 2007
Location: winnipeg
Age: 38
Posts: 875
Trader Rating: (6)
Feedback Score: 6 reviews
|
Quote:
__________________
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
