S14 DIN Sized Gauge Pods - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DruidAT · 06-28-2016, 03:40 PM

What's up everybody? I've been lurking the forums for years but I don't post much. Wanted to show you something I've been working on. I designed and 3D printed these S14 gauge pods. It snaps into place and for extra security, you can tap the holes on the back of your radio trim to accept a an M6-0.75 screw (I think, I can't remember). It accepts 3X 52mm gauges and 3X 38mm gauges. 5 degree flush taper face.

I just wanted to see what you guys think. I actually don't have any gauges to mount up and was wondering if any of you would be willing to test it out. I'll let you keep it afterward for your help. As long as you can prove you've got both sizes of gauges to test fit them, just pay the shipping and I'll send them your way. I'd imagine they'd match the dash pretty well with some primer and SEM texture coat. Not sending out the Single DIN unit right now since it's already in my car gaugeless and I'm too lazy to remove it.

heychris · 06-28-2016, 11:12 PM

Check your PM's
Ch

sent from knee deep in snow

BoostyMcZface · 06-29-2016, 02:21 AM

Your pictures don't work for me on my cell or computer. Can you post them in another form? Thanks!

DruidAT · 06-29-2016, 09:13 AM

Quote:

Originally Posted by BoostyMcZface

Your pictures don't work for me on my cell or computer. Can you post them in another form? Thanks!

They work fine for me. They're hosted on tinypic. PM me your e-mail and I'll send them to you.

Sent from my SM-N920P using Tapatalk

06-28-2016, 03:40 PM	#1
DruidAT Leaky Injector Join Date: Sep 2008 Location: Corpus Christi, TX Age: 34 Posts: 94 Trader Rating: (4) Feedback Score: 4 reviews	S14 DIN Sized Gauge Pods What's up everybody? I've been lurking the forums for years but I don't post much. Wanted to show you something I've been working on. I designed and 3D printed these S14 gauge pods. It snaps into place and for extra security, you can tap the holes on the back of your radio trim to accept a an M6-0.75 screw (I think, I can't remember). It accepts 3X 52mm gauges and 3X 38mm gauges. 5 degree flush taper face. I just wanted to see what you guys think. I actually don't have any gauges to mount up and was wondering if any of you would be willing to test it out. I'll let you keep it afterward for your help. As long as you can prove you've got both sizes of gauges to test fit them, just pay the shipping and I'll send them your way. I'd imagine they'd match the dash pretty well with some primer and SEM texture coat. Not sending out the Single DIN unit right now since it's already in my car gaugeless and I'm too lazy to remove it.

06-28-2016, 11:12 PM	#2
heychris Zilvia Addict Join Date: Oct 2007 Location: SkiTown USA Posts: 760 Trader Rating: (20) Feedback Score: 20 reviews	Check your PM's Ch sent from knee deep in snow

06-29-2016, 02:21 AM	#3
BoostyMcZface Zilvia Member Join Date: Apr 2016 Location: Washington Posts: 221 Trader Rating: (0) Feedback Score: 0 reviews	Your pictures don't work for me on my cell or computer. Can you post them in another form? Thanks!