new cluch issues - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jorge1190 · 07-16-2008, 03:10 PM

i just put a new clutch in my ca18 and i noticed that when i put it in neutral and let the clutch out the driveshaft starts spinning??(the back was on jack stands) i checked everythinr bled the system twice but i did notice my clutch fork had a lil bit of play when i disconnected the slave. Is that supposed to have play cause if not i have to yank the motor back out cause CA sit too far back to puts the trans back on from underneath

07-16-2008, 03:10 PM	#1
jorge1190 Zilvia Junkie Join Date: Mar 2008 Location: Culpeper, Va Age: 33 Posts: 593 Trader Rating: (12) Feedback Score: 12 reviews	new cluch issues i just put a new clutch in my ca18 and i noticed that when i put it in neutral and let the clutch out the driveshaft starts spinning??(the back was on jack stands) i checked everythinr bled the system twice but i did notice my clutch fork had a lil bit of play when i disconnected the slave. Is that supposed to have play cause if not i have to yank the motor back out cause CA sit too far back to puts the trans back on from underneath