NY RB26DETT Parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

4jo3 · 02-22-2010, 10:14 PM

Item: Set of 444cc Injectors for RB26DETT (6)
Location: Belleville, ON
Condition: Under 110,000km, one injector was replaced. All injectors were tested and do not leak, they are in perfect shape
Reason For Selling: I went with bigger injectors
Price: 150 + Shipping
Pics: Will be up in the next couple days.

Item: Set of RB26DETT MAFs (2)
Location: Belleville, ON
Condition: Under 110,000km
Reason For Selling: Went MAP
Price: 200 + Shipping
Pics:

Item: Flashed RB26DETT ECU, I don't know the partuclars on this one... I'm assuming speed cut, it was running a bit more rich, and uprated boost and I was running no cat. Again I cannot verify this... I'm just assuming as the ecu came with the car. I pulled the ecu 2k after driving it. It did shoot flames thou... lol
Location: Belleville, ON
Condition: Under 110,000km, Doesn't have the back plate (I used it to mount my ECU
Reason For Selling: Went APEXI PFC
Price: 200 + Shipping
Pics:

Item: Intake and Exhaust Camshafts with Valvesprings
Location: Belleville, ON
Condition: Under 110,000km
Reason For Selling: Going bigger with bigger cams
Price: 150 + Shipping
Pics: Will be up in the next couple days.

Item: 2nd set of Intake and Exhaust Camshafts with Valvesprings
Location: Belleville, ON
Condition: Very good
Reason For Selling: I dont need two sets of stock cams
Price: 150 + Shipping
Pics: Will be up in the next couple days.

Item: Stock RB26DETT clutch with flywheel
Location: Belleville, ON
Condition: The flywheel will be resurfaced before I sell it and I will take measurements of the clutch plate soon (work has been busy). The guy who I bought the car from said it was replaced once but who knows. It never slipped when i drove it but then again, I never launched it.
Reason For Selling: Went twin plate
Price: 150 + Shipping
Pics: Will be up in the next couple days.

Item: HKS Downpipe for RB26DETT. The downpipe has a flex in it. The downpipes are 2 3/4" that go into a single 3"
Location: Belleville, ON
Condition: Almost brand new
Reason For Selling: Went with two 3" downpipes
Price: 400 + Shipping
Pics:

Item: One piece TIG welded 3" stainless steel exhaust with resonator and muffler. The muffler is 21" long, 8" in diameter with a 4 1/2" tip. The resontator is approximatly 8" long and 8" wide.
Location: Belleville, ON
Condition: Almost brand new
Reason For Selling: Went with 4" exhaust system
Price: 500 + Shipping
Pics:

Item: Stock Front RB26DETT Turbo
Condition: Looks to be in good shape except there are three little chips gone off the exhaust turbine
Reason For Selling: I blew the rear turbo and upgraded to GT2860-5's
Price: 100 + Shipping
Pics:

I have more stock stuff basically everything on the turbo side.

SWAT Team S14 · 02-23-2010, 07:29 PM

do you have the stock clutch fan, possibly?

4jo3 · 02-23-2010, 10:23 PM

no sorry i dont have one

4jo3 · 02-25-2010, 05:44 PM

bump ... added more parts

wantboost · 02-25-2010, 05:56 PM

interested in the turbo

EJ8 944 · 02-25-2010, 09:30 PM

in for pics of MAF's

4jo3 · 02-26-2010, 01:22 PM

Some pics are up ... The other pics will have to wait till next week.

Thanks

str4g63 · 02-27-2010, 04:36 PM

i sent you a pm yesterday

I am interested in the mafs

4jo3 · 02-28-2010, 05:41 PM

pms replied

4jo3 · 03-16-2010, 10:53 PM

some little parts sold on the turbo side. and the cams and springs with 110 000kms are spoken for.

02-22-2010, 10:14 PM	#1
4jo3 Join Date: Nov 2009 Location: Belleville, ON Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	RB26DETT Parts Item: Set of 444cc Injectors for RB26DETT (6) Location: Belleville, ON Condition: Under 110,000km, one injector was replaced. All injectors were tested and do not leak, they are in perfect shape Reason For Selling: I went with bigger injectors Price: 150 + Shipping Pics: Will be up in the next couple days. Item: Set of RB26DETT MAFs (2) Location: Belleville, ON Condition: Under 110,000km Reason For Selling: Went MAP Price: 200 + Shipping Pics: Item: Flashed RB26DETT ECU, I don't know the partuclars on this one... I'm assuming speed cut, it was running a bit more rich, and uprated boost and I was running no cat. Again I cannot verify this... I'm just assuming as the ecu came with the car. I pulled the ecu 2k after driving it. It did shoot flames thou... lol Location: Belleville, ON Condition: Under 110,000km, Doesn't have the back plate (I used it to mount my ECU Reason For Selling: Went APEXI PFC Price: 200 + Shipping Pics: Item: Intake and Exhaust Camshafts with Valvesprings Location: Belleville, ON Condition: Under 110,000km Reason For Selling: Going bigger with bigger cams Price: 150 + Shipping Pics: Will be up in the next couple days. Item: 2nd set of Intake and Exhaust Camshafts with Valvesprings Location: Belleville, ON Condition: Very good Reason For Selling: I dont need two sets of stock cams Price: 150 + Shipping Pics: Will be up in the next couple days. Item: Stock RB26DETT clutch with flywheel Location: Belleville, ON Condition: The flywheel will be resurfaced before I sell it and I will take measurements of the clutch plate soon (work has been busy). The guy who I bought the car from said it was replaced once but who knows. It never slipped when i drove it but then again, I never launched it. Reason For Selling: Went twin plate Price: 150 + Shipping Pics: Will be up in the next couple days. Item: HKS Downpipe for RB26DETT. The downpipe has a flex in it. The downpipes are 2 3/4" that go into a single 3" Location: Belleville, ON Condition: Almost brand new Reason For Selling: Went with two 3" downpipes Price: 400 + Shipping Pics: Item: One piece TIG welded 3" stainless steel exhaust with resonator and muffler. The muffler is 21" long, 8" in diameter with a 4 1/2" tip. The resontator is approximatly 8" long and 8" wide. Location: Belleville, ON Condition: Almost brand new Reason For Selling: Went with 4" exhaust system Price: 500 + Shipping Pics: Item: Stock Front RB26DETT Turbo Condition: Looks to be in good shape except there are three little chips gone off the exhaust turbine Reason For Selling: I blew the rear turbo and upgraded to GT2860-5's Price: 100 + Shipping Pics: I have more stock stuff basically everything on the turbo side. Last edited by 4jo3; 02-26-2010 at 01:24 PM.. Reason: Added pics and better description

02-23-2010, 07:29 PM	#2
SWAT Team S14 Zilvia Junkie Join Date: Mar 2005 Location: Dirtee Jerzee Posts: 431 Trader Rating: (14) Feedback Score: 14 reviews	do you have the stock clutch fan, possibly?

02-23-2010, 10:23 PM	#3
4jo3 Join Date: Nov 2009 Location: Belleville, ON Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	no sorry i dont have one

02-25-2010, 05:44 PM	#4
4jo3 Join Date: Nov 2009 Location: Belleville, ON Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	bump ... added more parts

02-25-2010, 05:56 PM	#5
wantboost Leaky Injector Join Date: Oct 2006 Location: Atlanta Age: 37 Posts: 99 Trader Rating: (1) Feedback Score: 1 reviews	interested in the turbo

02-25-2010, 09:30 PM	#6
EJ8 944 Zilvia Junkie Join Date: Aug 2009 Location: UT Age: 36 Posts: 558 Trader Rating: (8) Feedback Score: 8 reviews	in for pics of MAF's

02-26-2010, 01:22 PM	#7
4jo3 Join Date: Nov 2009 Location: Belleville, ON Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Some pics are up ... The other pics will have to wait till next week. Thanks

02-27-2010, 04:36 PM	#8
str4g63 Zilvia Member Join Date: May 2007 Location: Houston, Texas Posts: 234 Trader Rating: (10) Feedback Score: 10 reviews	i sent you a pm yesterday I am interested in the mafs

02-28-2010, 05:41 PM	#9
4jo3 Join Date: Nov 2009 Location: Belleville, ON Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	pms replied

03-16-2010, 10:53 PM	#10
4jo3 Join Date: Nov 2009 Location: Belleville, ON Age: 39 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	some little parts sold on the turbo side. and the cams and springs with 110 000kms are spoken for.