|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
05-31-2017, 07:13 PM | #1 |
No Camber with Camber Plates MAXED!
I have ISR coilovers and my Plates are absolutely maxed and I still don't have negative camber I may have like -0.5 but thats it!
|
|
Sponsored Links |
05-31-2017, 07:42 PM | #2 |
Nissanaholic!
|
Post a picture
__________________
MRP Manufacturing |
05-31-2017, 07:49 PM | #3 |
05-31-2017, 08:07 PM | #5 |
Leaky Injector
Join Date: Jun 2005
Location: Eastern Hemisphere
Posts: 123
Trader Rating: (0)
Feedback Score: 0 reviews
|
I'm assuming the top holes on the bottom brackets are egg shaped for camber bolts etc... I'm assuming you do not have camber bolts & did not push the spindle back properly prior to tightening the normal bolts down hella tight. Which could result in positive camber. Which would make sense as to why the camber plates above will not give enough negative camber.
__________________
| 92 S13 Hatch | 92 S13 Coupe | 95 S14.5 | |
05-31-2017, 09:52 PM | #6 |
Zilvia FREAK!
Join Date: Jun 2010
Location: Toronto, ON
Age: 36
Posts: 1,182
Trader Rating: (0)
Feedback Score: 0 reviews
|
How do you know you have no camber? Eyeballing? You can't really see -3 deg. When I was at -5 and -9 deg, those you could tell. What's the size of those 527's? If they're 17x9.75 +25, then you must have around -3 for them to fit like that.
Worth checking but here's my experience with that. I installed my coilovers with the knuckle pulled all the way out of the bracket for wheel to coil clearance. And with the top hats adjusted about 2/3 of the way in, my car had -3. So with the knuckle pushed in and the top hat maxxed it would be like -5, and that you can see. |
Bookmarks |
|
|