MI S1 RB25det into S14 full swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mx4evr · 10-07-2013, 01:30 AM

Hello fellow Zilvians,

For sale is a complete series 1 rb25det into s14 swap.

Included is:
Rb25det motor and tranny
Mckinney motor mounts and drive shaft
Rb25det ECU and full wiring harness (speedo and windshield wipers were kept and work)
FMIC and IC piping
Turbosmart BOV
Cold-air intake
Downpipe
Clutch Slave

A compression test was done and all cylinders were all within a 5psi range.

The donor s14 is a garage queen. I took this motor out to strip the car down and build it back up and in the process, found another RB25 with a bunch of bolt ons that I ended up buying.

This motor ran fine in my car, the only problem was an occasional hiccup in the acceleration that I've guessed is due to a boost leak. That being said, I did not drive the car much as I have had it off the road since I purchased it two years ago.

This sale does not include:
Radiator
Power steering pump or it's belt

Things you will need to make this swap run well:
Stock or aftermarket KA radiator with hoses(other rads work as well)
Gaskets for the intake manifold and downpipe
Several hose clamps & intercooler piping couplers(though all are included, you may want to replace some)

If you already had an RB swap in mind and you were going from scratch, this is a great way to get started. This is an especially great platform if you have plans for big power down the road. Almost everything needed to have the engine running well in the bay of a 240 is included.

I am not willing to split the parts up yet, however, if I get a reasonable offer on the motor alone, I may consider doing so.

Asking $4000, o.b.o., motor located in Windsor, Ontario

I may be willing to bring it over the Michigan border to save you the trouble of dealing with US customs. Otherwise, I'm willing to ship it at the buyer's expense.

For any questions, please pm, feel free to ask for my number

Nick

CharCharXD · 10-07-2013, 11:45 AM

If you would part out. Would you sell the wiring harness?

mx4evr · 10-07-2013, 12:05 PM

Maybe in the future, but for now I want to gauge interest on the whole package. I'd rather get rid of it all at once than get stuck with the leftover parts nobody wants.

mx4evr · 10-08-2013, 07:49 PM

RB25s can hold 500+hp on stock internals!

mx4evr · 10-23-2013, 10:56 AM

Price negotiable, fire me a PM!

emericanz · 10-29-2013, 12:30 PM

Willing to partout yet?

mx4evr · 11-03-2013, 09:11 PM

What are you looking for? Sorry for the late reply

Sent from my iPad using Tapatalk - now Free

mx4evr · 11-21-2013, 09:45 AM

Price reduced, $3500, need it gone.

Devinjay · 12-19-2013, 07:05 PM

Will to part with the pipe that goes from outlet of compressor side to the first pipe on the drivers side of the intercooler?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

mx4evr · 12-19-2013, 07:07 PM

Sorry, waiting to sell the whole thing as a package still

Sent from my iPhone using Tapatalk - now Free

Devinjay · 12-19-2013, 07:08 PM

Let me know if you decide to part with it.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

mx4evr · 12-19-2013, 07:11 PM

Will do

Sent from my iPhone using Tapatalk - now Free

ehp · 12-19-2013, 10:15 PM

how would i get this from california?

mx4evr · 12-19-2013, 10:21 PM

I could ship it to you?

Sent from my iPhone using Tapatalk - now Free

mx4evr · 03-17-2014, 09:42 AM

Tax time!! Let's get this thing sold!

Sent from my iPhone using Tapatalk - now Free

mx4evr · 03-26-2014, 06:25 PM

Still for sale, motivated to get it out of my garage!

Sent from my iPad using Tapatalk

redjet · 04-11-2014, 11:45 AM

I need the driveshaft and FMIC if you want to part out

spartanmisfit · 04-21-2014, 03:45 PM

Willing to part out the harness? If so I assume its wiring specialties?

Sent from my DROID RAZR HD using Tapatalk

11-21-2013, 09:45 AM	#8
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	S1 RB25det into S14 full swap Price reduced, $3500, need it gone.

12-19-2013, 10:15 PM	#13
ehp Zilvia Junkie Join Date: Aug 2012 Location: Southern California Age: 30 Posts: 402 Trader Rating: (6) Feedback Score: 6 reviews	how would i get this from california? __________________ follow my build on instagram: s14project

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2013, 11:45 AM	#2
CharCharXD Zilvia Junkie Join Date: Apr 2012 Location: Death Valley Posts: 384 Trader Rating: (5) Feedback Score: 5 reviews	If you would part out. Would you sell the wiring harness?

10-07-2013, 12:05 PM	#3
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Maybe in the future, but for now I want to gauge interest on the whole package. I'd rather get rid of it all at once than get stuck with the leftover parts nobody wants.

10-08-2013, 07:49 PM	#4
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	RB25s can hold 500+hp on stock internals!

10-23-2013, 10:56 AM	#5
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Price negotiable, fire me a PM!

10-29-2013, 12:30 PM	#6
emericanz Zilvia Junkie Join Date: Sep 2010 Location: doylestown, pa Age: 33 Posts: 397 Trader Rating: (7) Feedback Score: 7 reviews	Willing to partout yet?

11-03-2013, 09:11 PM	#7
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	What are you looking for? Sorry for the late reply Sent from my iPad using Tapatalk - now Free

12-19-2013, 07:05 PM	#9
Devinjay Leaky Injector Join Date: Mar 2013 Location: Topeka, Kansas Age: 30 Posts: 124 Trader Rating: (3) Feedback Score: 3 reviews	Will to part with the pipe that goes from outlet of compressor side to the first pipe on the drivers side of the intercooler? Sent from my SAMSUNG-SGH-I337 using Tapatalk

12-19-2013, 07:07 PM	#10
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Sorry, waiting to sell the whole thing as a package still Sent from my iPhone using Tapatalk - now Free

12-19-2013, 07:08 PM	#11
Devinjay Leaky Injector Join Date: Mar 2013 Location: Topeka, Kansas Age: 30 Posts: 124 Trader Rating: (3) Feedback Score: 3 reviews	Let me know if you decide to part with it. Sent from my SAMSUNG-SGH-I337 using Tapatalk

12-19-2013, 07:11 PM	#12
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Will do Sent from my iPhone using Tapatalk - now Free

12-19-2013, 10:21 PM	#14
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	I could ship it to you? Sent from my iPhone using Tapatalk - now Free

03-17-2014, 09:42 AM	#15
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Tax time!! Let's get this thing sold! Sent from my iPhone using Tapatalk - now Free

03-26-2014, 06:25 PM	#16
mx4evr Join Date: Jun 2011 Location: Detroit MI Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Still for sale, motivated to get it out of my garage! Sent from my iPad using Tapatalk

04-11-2014, 11:45 AM	#17
redjet Zilvia Addict Join Date: Apr 2010 Location: Brooklyn, NY Age: 36 Posts: 655 Trader Rating: (5) Feedback Score: 5 reviews	I need the driveshaft and FMIC if you want to part out

04-21-2014, 03:45 PM	#18
spartanmisfit Zilvia FREAK! Join Date: Jul 2008 Location: East Lansing, Michigan Posts: 1,332 Trader Rating: (18) Feedback Score: 18 reviews	Willing to part out the harness? If so I assume its wiring specialties? Sent from my DROID RAZR HD using Tapatalk