Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 01-26-2010, 01:23 PM   #421
TurboSE
Zilvia Addict
 
TurboSE's Avatar
 
Join Date: Sep 2005
Location: Hanover Pa
Posts: 740
Trader Rating: (15)
TurboSE is an unknown quantity at this point
Feedback Score: 15 reviews
Quote:
Originally Posted by Slammed180 View Post

I need those as well, thank you, but there are white ones on the firewall that hold 3 or 4 lines that I also need...thanks for the good start though!
__________________
WTB: PAIR 18x10 0 to -25, less than $1500 shipped please.

Last edited by TurboSE; 01-26-2010 at 01:44 PM..
TurboSE is offline   Reply With Quote
Sponsored Links
Old 01-26-2010, 02:43 PM   #422
hOngsterr
Bandwagon.
 
hOngsterr's Avatar
 
Join Date: Nov 2008
Location: OC (714)
Posts: 4,751
Trader Rating: (73)
hOngsterr is an unknown quantity at this point
Feedback Score: 73 reviews
Send a message via AIM to hOngsterr
Quote:
Originally Posted by udon! View Post
what is the point of frame rails besides using them to lift a car.

your not suppose to lift the car
on the frame rails lol.
__________________
- Hong
Quote:
Originally Posted by jspecusa View Post
OCD isn't so bad just means you'll spend more money then most people, but you'll have a quality car not a POS put together with POS parts.
hOngsterr is offline   Reply With Quote
Old 01-26-2010, 02:46 PM   #423
NeedCAforS13
Zilvia Addict
 
NeedCAforS13's Avatar
 
Join Date: Apr 2003
Location: Tampa, Florida
Age: 39
Posts: 628
Trader Rating: (3)
NeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura about
Feedback Score: 3 reviews
Send a message via AIM to NeedCAforS13
Quote:
Originally Posted by TurboSE View Post
I need those as well, thank you, but there are white ones on the firewall that hold 3 or 4 lines that I also need...thanks for the good start though!
Courtesy Nissan has the brackets you're looking for...

462 Brake Piping & Control :: Brake :: Genuine Nissan Parts :: 240SX Parts (S13) 1989-1994 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

__________________
NeedCAforS13 is offline   Reply With Quote
Old 01-26-2010, 02:47 PM   #424
sonomadrifter
Zilvia Junkie
 
sonomadrifter's Avatar
 
Join Date: Sep 2006
Location: culpeper/richmond
Posts: 370
Trader Rating: (10)
sonomadrifter is a jewel in the roughsonomadrifter is a jewel in the roughsonomadrifter is a jewel in the roughsonomadrifter is a jewel in the roughsonomadrifter is a jewel in the roughsonomadrifter is a jewel in the roughsonomadrifter is a jewel in the rough
Feedback Score: 10 reviews
Can s14 front studs be changed to 60mm extendeds without pulling the hub?
sonomadrifter is offline   Reply With Quote
Old 01-26-2010, 02:50 PM   #425
Iron_Zenki
Zilvia Junkie
 
Iron_Zenki's Avatar
 
Join Date: Oct 2008
Location: Murrieta
Age: 34
Posts: 360
Trader Rating: (5)
Iron_Zenki is an unknown quantity at this point
Feedback Score: 5 reviews
With a welded diff will i get unusual tire wear?
__________________
Quote:
Originally Posted by handinpants View Post
anyways,watch out for stupid people driving hondas
Iron_Zenki is offline   Reply With Quote
Old 01-26-2010, 02:55 PM   #426
NeedCAforS13
Zilvia Addict
 
NeedCAforS13's Avatar
 
Join Date: Apr 2003
Location: Tampa, Florida
Age: 39
Posts: 628
Trader Rating: (3)
NeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura about
Feedback Score: 3 reviews
Send a message via AIM to NeedCAforS13
I've changed out stock studs before, so I can't see why you wouldn't be able to do 60mm extended studs.

But honestly, pulling the front hub isn't THAT hard if you can't get them in for whatever reason.

And YES. Welded diff's fuck up your tires fast. I had quite a few sets chunk up when I had a welded diff.
__________________
NeedCAforS13 is offline   Reply With Quote
Old 01-26-2010, 03:07 PM   #427
TurboSE
Zilvia Addict
 
TurboSE's Avatar
 
Join Date: Sep 2005
Location: Hanover Pa
Posts: 740
Trader Rating: (15)
TurboSE is an unknown quantity at this point
Feedback Score: 15 reviews
thanks for the hook-up, unfortunately, according to the site, most of them are no longer available...
__________________
WTB: PAIR 18x10 0 to -25, less than $1500 shipped please.
TurboSE is offline   Reply With Quote
Old 01-26-2010, 03:26 PM   #428
los_inc
Zilvia Addict
 
los_inc's Avatar
 
Join Date: Apr 2006
Location: New Joisey Bro.
Age: 39
Posts: 826
Trader Rating: (15)
los_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond reputelos_inc has a reputation beyond repute
Feedback Score: 15 reviews
Send a message via AIM to los_inc
yepp i just did it last night
cheers mate



Quote:
Originally Posted by sonomadrifter View Post
Can s14 front studs be changed to 60mm extendeds without pulling the hub?
__________________
los_inc is offline   Reply With Quote
Old 01-26-2010, 03:33 PM   #429
NeedCAforS13
Zilvia Addict
 
NeedCAforS13's Avatar
 
Join Date: Apr 2003
Location: Tampa, Florida
Age: 39
Posts: 628
Trader Rating: (3)
NeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura about
Feedback Score: 3 reviews
Send a message via AIM to NeedCAforS13
Quote:
Originally Posted by TurboSE View Post
thanks for the hook-up, unfortunately, according to the site, most of them are no longer available...
Oh shit, good catch, didn't even notice that. Damn.

Well if they don't have it, I doubt you'll find it at other dealerships.

Check out the S14 brake lines, they might be interchangeable,and they still have some of those brackets.
__________________
NeedCAforS13 is offline   Reply With Quote
Old 01-27-2010, 02:57 AM   #430
TurboSE
Zilvia Addict
 
TurboSE's Avatar
 
Join Date: Sep 2005
Location: Hanover Pa
Posts: 740
Trader Rating: (15)
TurboSE is an unknown quantity at this point
Feedback Score: 15 reviews
some of the S14 clips look similar, but from those pics I can't tell. I'm just gonna modify some of the ones posted by Slammed180, thanks for all the help guys, much appreciated!
__________________
WTB: PAIR 18x10 0 to -25, less than $1500 shipped please.
TurboSE is offline   Reply With Quote
Old 01-27-2010, 03:44 AM   #431
Nidd
Leaky Injector
 
Nidd's Avatar
 
Join Date: Dec 2009
Location: Northern IL
Age: 34
Posts: 85
Trader Rating: (0)
Nidd is an unknown quantity at this point
Feedback Score: 0 reviews
can any one explain the difference between clutches or point me in the direction to find out? i can't seem to find what the difference between 4 pad, 6 pad and clutches that have an entire circle around them is.
Nidd is offline   Reply With Quote
Old 01-27-2010, 05:10 AM   #432
ayuaddict
Post Whore!
 
ayuaddict's Avatar
 
Join Date: Jan 2006
Location: Socal
Age: 35
Posts: 4,017
Trader Rating: (9)
ayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfectionayuaddict is close to perfection
Feedback Score: 9 reviews
Send a message via AIM to ayuaddict
as far as i know there are different friction materials ranging from organic to metallic compounds.

there are also sprung and unsprung clutches, the springs smooth out the drivetrain shock when engaging the clutch, and a unsprung clutch will put more stress on your trasmission.

typically more "grabby" compounds will be used on clutches that dont have full surface area (the 4 and 6 puck clutches you mentioned).

obviously the more grabby the material (metallic) the less the life of the flywheel, clutch and pressure plate.
ayuaddict is offline   Reply With Quote
Old 01-27-2010, 06:49 AM   #433
XnTroubleX
Zilvia Member
 
XnTroubleX's Avatar
 
Join Date: Nov 2009
Location: louisiana
Age: 40
Posts: 293
Trader Rating: (7)
XnTroubleX is an unknown quantity at this point
Feedback Score: 7 reviews
I have a guy wanting to buy my manifold
http://zilvia.net/f/sale-items/30258...light=topmount

but his turbo is internally wastegated and was wanting to know if their was a place that sales blockoff plates for where the external wastegate would normally bolt to.
XnTroubleX is offline   Reply With Quote
Old 01-27-2010, 07:49 AM   #434
irritatedmax
Zilvia FREAK!
 
irritatedmax's Avatar
 
Join Date: Sep 2005
Location: Ashland, NE
Age: 38
Posts: 1,359
Trader Rating: (20)
irritatedmax will become famous soon enoughirritatedmax will become famous soon enoughirritatedmax will become famous soon enoughirritatedmax will become famous soon enough
Feedback Score: 20 reviews
Quote:
Originally Posted by XnTroubleX View Post
I have a guy wanting to buy my manifold
http://zilvia.net/f/sale-items/30258...light=topmount

but his turbo is internally wastegated and was wanting to know if their was a place that sales blockoff plates for where the external wastegate would normally bolt to.
frsport is just one of many....and they are a sponsor.

FRS Steel External Wastegate Block-Off Flange Deltagate/Tial 35mm 38mm
__________________
BRICKHOUSE PRODUCTS
IG @brickhouse_products
irritatedmax is offline   Reply With Quote
Old 01-27-2010, 10:04 AM   #435
Slammed180
Zilvia FREAK!
 
Join Date: Oct 2007
Location: Calgary, Canada
Age: 37
Posts: 1,445
Trader Rating: (1)
Slammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of light
Feedback Score: 1 reviews
Quote:
Originally Posted by TurboSE View Post
some of the S14 clips look similar, but from those pics I can't tell. I'm just gonna modify some of the ones posted by Slammed180, thanks for all the help guys, much appreciated!
They have the single pipe clips on that site as well, so you could just drill another hole and use both the single, and double pipe clips.
__________________
Blow me, bitches.
Slammed180 is offline   Reply With Quote
Old 01-27-2010, 11:01 AM   #436
blacknblue
Leaky Injector
 
Join Date: May 2008
Location: New Jersey
Age: 35
Posts: 62
Trader Rating: (5)
blacknblue is an unknown quantity at this point
Feedback Score: 5 reviews
I was looking for a s14 5-speed drive shaft and someone is trying to give me one from an s15 saying that it will fit. Can anyone confirm this?
blacknblue is offline   Reply With Quote
Old 01-27-2010, 11:38 AM   #437
NeedCAforS13
Zilvia Addict
 
NeedCAforS13's Avatar
 
Join Date: Apr 2003
Location: Tampa, Florida
Age: 39
Posts: 628
Trader Rating: (3)
NeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura about
Feedback Score: 3 reviews
Send a message via AIM to NeedCAforS13
Maybe one of the 5 speed S15 driveshaft's, but the 6 speed uses a different shaft for sure.
__________________
NeedCAforS13 is offline   Reply With Quote
Old 01-27-2010, 11:49 AM   #438
allntrlundrgrnd
Nissanaholic!
 
allntrlundrgrnd's Avatar
 
Join Date: Jul 2007
Location: Portland, OR
Posts: 2,478
Trader Rating: (17)
allntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfectionallntrlundrgrnd is close to perfection
Feedback Score: 17 reviews
Whats a good ignition source to wire an electric fan control relay to in the engine bay?
allntrlundrgrnd is offline   Reply With Quote
Old 01-27-2010, 02:31 PM   #439
stinky_180
Nissanaholic!
 
stinky_180's Avatar
 
Join Date: May 2004
Location: Pale Blue Dot
Age: 39
Posts: 2,064
Trader Rating: (26)
stinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud of
Feedback Score: 26 reviews
Send a message via AIM to stinky_180
Any differences between SOHC/DOHC KA24 rear crankshaft main seals? (interchangeable?)
__________________
SoCal RallyX Coverage and MTB Ride Reports
WheelsDirty
stinky_180 is offline   Reply With Quote
Old 01-27-2010, 03:01 PM   #440
Wabash9000
Zilvia Member
 
Join Date: Oct 2006
Location: Kansas
Age: 35
Posts: 217
Trader Rating: (0)
Wabash9000 has a little shameless behavior in the past
Feedback Score: 0 reviews
can I use a 350z track edition rotor with 300zx caliper fit under the base 17" 350z 7 spoke wheels? I know that non track edition cars came with the track brakes, but I don't know if the calipers are the same size or if any of them came with 17" wheels over the track brakes.
Wabash9000 is offline   Reply With Quote
Old 01-27-2010, 03:26 PM   #441
Tom25666
Zilvia Addict
 
Tom25666's Avatar
 
Join Date: Aug 2008
Location: Alabama
Age: 39
Posts: 644
Trader Rating: (5)
Tom25666 has made poor choicesTom25666 has made poor choicesTom25666 has made poor choicesTom25666 has made poor choicesTom25666 has made poor choicesTom25666 has made poor choices
Feedback Score: 5 reviews
what all do you need to upgrade a redtop with a t25 to a disco potato setup? just some 550's and a z32 maf? it would need a good tune as well, yes?
__________________
Quote:
I have 1000 hp. This thread is dumb.
Tom25666 is offline   Reply With Quote
Old 01-27-2010, 05:16 PM   #442
My$800S14
Zilvia Junkie
 
My$800S14's Avatar
 
Join Date: Dec 2009
Location: Orlando FL
Age: 35
Posts: 350
Trader Rating: (1)
My$800S14 is an unknown quantity at this point
Feedback Score: 1 reviews
SOHC Transmission?

Does the SOHC Transmission have shorter gears than the DOHC Transmission on a 240sx? and also, will a SOHC transmission bolt up to a DOHC block, or DOHC bell housing? what would need to be done to do this, obviously it would only be worth it if the gear ratio inside of the transmission was different.
My$800S14 is offline   Reply With Quote
Old 01-27-2010, 08:11 PM   #443
kalypso123
(ノಠ益ಠ)ノ彡
 
Join Date: Apr 2008
Location: New York, NY
Posts: 2,853
Trader Rating: (2)
kalypso123 is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by sonomadrifter View Post
Can s14 front studs be changed to 60mm extendeds without pulling the hub?
no because you have to push the studs in, and hammer them down.

but removing the hub isnt difficult you can do each side in 20 mins if you have the tools ready.
kalypso123 is offline   Reply With Quote
Old 01-27-2010, 08:15 PM   #444
kalypso123
(ノಠ益ಠ)ノ彡
 
Join Date: Apr 2008
Location: New York, NY
Posts: 2,853
Trader Rating: (2)
kalypso123 is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by Tom25666 View Post
what all do you need to upgrade a redtop with a t25 to a disco potato setup? just some 550's and a z32 maf? it would need a good tune as well, yes?
yup... that basically all you need.

Nismo FPR helps.
oil / coolant lines.
downpipe & manifold.
IC piping if necessary.
kalypso123 is offline   Reply With Quote
Old 01-28-2010, 06:50 AM   #445
NeedCAforS13
Zilvia Addict
 
NeedCAforS13's Avatar
 
Join Date: Apr 2003
Location: Tampa, Florida
Age: 39
Posts: 628
Trader Rating: (3)
NeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura aboutNeedCAforS13 has a spectacular aura about
Feedback Score: 3 reviews
Send a message via AIM to NeedCAforS13
Quote:
Originally Posted by kalypso123 View Post
no because you have to push the studs in, and hammer them down.

but removing the hub isnt difficult you can do each side in 20 mins if you have the tools ready.
If you have air tools you just impact a lug nut on... no need to pull the hub to change out studs.

Quote:
Originally Posted by kalypso123 View Post
yup... that basically all you need.

Nismo FPR helps.
oil / coolant lines.
downpipe & manifold.
IC piping if necessary.
It's hard to tell what you're saying, but YES he needs a tune with 550's and a Z32 MAF. He also needs an oil feed line with the built in restrictor for the ball bearing CHRA. I would get a set of stainless lines for ease of installation.
__________________
NeedCAforS13 is offline   Reply With Quote
Old 01-28-2010, 09:30 AM   #446
dg_htx
 
Join Date: Jan 2010
Location: houston
Posts: 1
Trader Rating: (0)
dg_htx is an unknown quantity at this point
Feedback Score: 0 reviews
New member here. Just wondering if you guys got a sticky for what to look out for when purchasing a 240sx. Thinking of picking one up.... is there anything that I should be aware of?
Thanks
dg_htx is offline   Reply With Quote
Old 01-28-2010, 10:21 AM   #447
Slammed180
Zilvia FREAK!
 
Join Date: Oct 2007
Location: Calgary, Canada
Age: 37
Posts: 1,445
Trader Rating: (1)
Slammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of light
Feedback Score: 1 reviews
Quote:
Originally Posted by dg_htx View Post
New member here. Just wondering if you guys got a sticky for what to look out for when purchasing a 240sx. Thinking of picking one up.... is there anything that I should be aware of?
Thanks
Be aware it's a 240sx.
__________________
Blow me, bitches.
Slammed180 is offline   Reply With Quote
Old 01-28-2010, 11:34 AM   #448
WISH ONE
Post Whore!
 
Join Date: Aug 2006
Location: orange county ca
Posts: 2,738
Trader Rating: (13)
WISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfectionWISH ONE is close to perfection
Feedback Score: 13 reviews
Send a message via AIM to WISH ONE
Why dont we have a HOUSING/ROOMATES thread??? or do we? I searched and found nothing.
__________________
PARTING/SELLING MY COUPE. PM ME.
WISH ONE is offline   Reply With Quote
Old 01-28-2010, 11:59 AM   #449
coww-cho!!!!!
Zilvia FREAK!
 
coww-cho!!!!!'s Avatar
 
Join Date: Jan 2008
Location: I.E. triiiick
Age: 36
Posts: 1,001
Trader Rating: (3)
coww-cho!!!!! is a jewel in the roughcoww-cho!!!!! is a jewel in the roughcoww-cho!!!!! is a jewel in the roughcoww-cho!!!!! is a jewel in the roughcoww-cho!!!!! is a jewel in the roughcoww-cho!!!!! is a jewel in the roughcoww-cho!!!!! is a jewel in the roughcoww-cho!!!!! is a jewel in the rough
Feedback Score: 3 reviews
Send a message via AIM to coww-cho!!!!!
Quote:
Originally Posted by dg_htx View Post
New member here. Just wondering if you guys got a sticky for what to look out for when purchasing a 240sx. Thinking of picking one up.... is there anything that I should be aware of?
Thanks
ya there was one last year when some one posted what to look for when purchasing a 240sx
you might be able to find it under the search button
and 240sxtech.com is your friend for "know how to stuff"
__________________
**CoUpe LOve** #3
coww-cho!!!!! is offline   Reply With Quote
Old 01-28-2010, 02:33 PM   #450
stinky_180
Nissanaholic!
 
stinky_180's Avatar
 
Join Date: May 2004
Location: Pale Blue Dot
Age: 39
Posts: 2,064
Trader Rating: (26)
stinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud ofstinky_180 has much to be proud of
Feedback Score: 26 reviews
Send a message via AIM to stinky_180
KA The Small Questions, that NEVER GET ANSWERED, Thread

Quote:
Originally Posted by stinky_180 View Post
Any differences between SOHC/DOHC KA24 rear crankshaft main seals? (interchangeable?)
hrmm so nobody knows huh?????????
__________________
SoCal RallyX Coverage and MTB Ride Reports
WheelsDirty
stinky_180 is offline   Reply With Quote
Reply

Bookmarks

Tags
180sx type x kouki, 1jz, 2jz, 300zx, clutch, faq, ka24de, n/a, non-turbo, question, redtop s13 180sx silvia, s14, search, solenoid, starter, z32, zenki


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net