need help with rb20 into s14 pics of plugs unplugged - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SpoolNSlide · 08-30-2012, 06:31 PM

Ive got to swap pretty much finished and cant get it to crank...the engine harness is a harness bought from wiring specialties and i made the trans harness...im getting fuel ive check for leaks and etc...but the car just turns over and its not getting spark. I have a few plugs that arent plugged up im hoping someone can identify as i dont remember where they went...heres pics..

the two black relays to the left came on my harness from wiring specialties now i have empty blue relay and nothing to plug in?

This plug i cant see anywhere for it to plug into at its attached to the trans harness

These two are right by the wipers...thinking one was for CC but i dont know can someone identfy?

SpoolNSlide · 08-31-2012, 02:49 PM

guess im on my own

Majorwood76 · 08-31-2012, 04:54 PM

That empty blue relay just sits in my passenger side next to the ecu the one up top mine just hangs there zip tied to nothing I have nothing running to my tranny as for wiring. Double check your ignitor ground or replace the ignitor...Check coilpacks

SpoolNSlide · 09-02-2012, 09:52 AM

replace ignitor its fine....still no spark...figured out all plugs except one by the trans i did find out on the ka that the plug is for 4 ecu grounds, 2 oxygen heater sensors and a cps sensor its a 8 pin plug with 7 wires

SpoolNSlide · 09-04-2012, 06:32 PM

put my ignitor and coil on my bro's rb25 and runs his car find...cas seems to check out fine

08-30-2012, 06:31 PM	#1
SpoolNSlide Zilvia Member Join Date: Oct 2007 Location: Columbus,GA Posts: 152 Trader Rating: (2) Feedback Score: 2 reviews	need help with rb20 into s14 pics of plugs unplugged Ive got to swap pretty much finished and cant get it to crank...the engine harness is a harness bought from wiring specialties and i made the trans harness...im getting fuel ive check for leaks and etc...but the car just turns over and its not getting spark. I have a few plugs that arent plugged up im hoping someone can identify as i dont remember where they went...heres pics.. the two black relays to the left came on my harness from wiring specialties now i have empty blue relay and nothing to plug in? This plug i cant see anywhere for it to plug into at its attached to the trans harness These two are right by the wipers...thinking one was for CC but i dont know can someone identfy? __________________ I do rb25 in s14 wiring pm if interested 200.00

08-31-2012, 02:49 PM	#2
SpoolNSlide Zilvia Member Join Date: Oct 2007 Location: Columbus,GA Posts: 152 Trader Rating: (2) Feedback Score: 2 reviews	guess im on my own __________________ I do rb25 in s14 wiring pm if interested 200.00

09-02-2012, 09:52 AM	#4
SpoolNSlide Zilvia Member Join Date: Oct 2007 Location: Columbus,GA Posts: 152 Trader Rating: (2) Feedback Score: 2 reviews	replace ignitor its fine....still no spark...figured out all plugs except one by the trans i did find out on the ka that the plug is for 4 ecu grounds, 2 oxygen heater sensors and a cps sensor its a 8 pin plug with 7 wires __________________ I do rb25 in s14 wiring pm if interested 200.00

09-04-2012, 06:32 PM	#5
SpoolNSlide Zilvia Member Join Date: Oct 2007 Location: Columbus,GA Posts: 152 Trader Rating: (2) Feedback Score: 2 reviews	put my ignitor and coil on my bro's rb25 and runs his car find...cas seems to check out fine __________________ I do rb25 in s14 wiring pm if interested 200.00

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-31-2012, 04:54 PM	#3
Majorwood76 Zilvia Member Join Date: Nov 2011 Location: Buckeye AZ Age: 40 Posts: 289 Trader Rating: (7) Feedback Score: 7 reviews	That empty blue relay just sits in my passenger side next to the ecu the one up top mine just hangs there zip tied to nothing I have nothing running to my tranny as for wiring. Double check your ignitor ground or replace the ignitor...Check coilpacks