|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
07-20-2008, 03:03 PM | #1 |
Zilvia Junkie
Join Date: Mar 2005
Location: Jacksonville, ar
Age: 37
Posts: 555
Trader Rating: (2)
Feedback Score: 2 reviews
|
what do you guys think of this
this is my first thread im posting where i dont have a problem. i decided to make a tube to make colder air to hit my intake. i was board and wanted to do a project. i got the idea because someone else had a shop do it for them on another car.it took about $20 for the rivit gun, $28 for the aluminum and i already had the dremel. with a lot of little cuts and trial and error i finally did it. this is the outcome
this is where it is coming into:http://i340.photobucket.com/albums/o...sx/carvent.jpg here it is looking in from the light hole: http://i340.photobucket.com/albums/o...40sx/light.jpg here it is through the vent: http://i340.photobucket.com/albums/o...240sx/pipe.jpg and this is where it comes out: http://i340.photobucket.com/albums/o...240sx/hole.jpg this is my first custom project. tell me what you guys think and what i could do to make it better. its not air tight but it should be good enough, right? i didnt feel much of a difference when i was driving but im sure it does a little something right? sorry if the pics dont work ill try again. Last edited by moses; 07-20-2008 at 03:26 PM.. |
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|