Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 07-18-2008, 09:05 PM   #1
nicku
Zilvia Junkie
 
Join Date: Aug 2007
Location: St. Cloud, MN
Age: 39
Posts: 545
Trader Rating: (0)
nicku will become famous soon enoughnicku will become famous soon enoughnicku will become famous soon enoughnicku will become famous soon enoughnicku will become famous soon enough
Feedback Score: 0 reviews
swapping exhaust cam to intake side s13 KA

I just installed the 248/248 with the 4 tooth method. however, the car doesnt not turn over.
What i did was, time everything as the stock specs. And put the exhaust cam into the intake side. Move the cam gear 4 teeth counter clockwise from the silver mark on the timing chain. and use wrenge to turn the cam so it will fit on the cam gear. and after that I put everything back together. But the car did crank but didnt crank over.
FYI, After we put everything back in, I manually turned the crank pulley for many rounds, and everything felt very smooth, it did not stuck at all.
__________________
nicku is offline   Reply With Quote
Sponsored Links
Old 07-19-2008, 04:14 AM   #2
Anto
Zilvia Addict
 
Anto's Avatar
 
Join Date: Jan 2006
Location: California
Posts: 862
Trader Rating: (2)
Anto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfectionAnto is close to perfection
Feedback Score: 2 reviews
It's your distributor.

http://zilvia.net/f/showthread.php?t=203342

I had the same problem. THOUGHT dist. timing was right, it wasn't keep rotating it a tooth in each direction until you get it.
__________________
Anto is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net