WTB JDM s13 digital climate control wiring write up with pix.

[JTunedMotorsports]

Hi all I need the JDM s13 digital climate control write up with pix..the link I found had not pix

The new issue is the blower motor is not working, power is to it, and I Jumped it just the control unit will not turn it on.

[JTunedMotorsports]

anyone? Most guides have no pix

[KAT-PWR]

Unfortunately after the second zilvia revolution much of that information was destroyed.

[corby_baby]

http://forums.240sxone.com/showthread.php?t=17034

[JTunedMotorsports]

Originally Posted by KAT-PWR

Unfortunately after the second zilvia revolution much of that information was destroyed.

yea I have to find out where the blue with red wire goes..I dont have fans going Im pretty close to done.

[JTunedMotorsports]

Originally Posted by corby_baby

http://forums.240sxone.com/showthread.php?t=17034

thanks the only thing I need to do is get constant 12v red and get the blue with red stripe wire to get working bc I cant get the fans to kick on.

[dwnshft2drft]

I installed a lot of them already. Send or post pics which connector wire your talking about.

I believe they are 2 or 3 models are slightly different wirings.

[JTunedMotorsports]

Originally Posted by dwnshft2drft

I installed a lot of them already. Send or post pics which connector wire your talking about.

I believe they are 2 or 3 models are slightly different wirings.

Hey there were the radio plugs blue and red with black 12v...Issue now is everything seems to work but the blowers.

[dwnshft2drft]

The RED wire 1 pin connector goes to R/B wire 12V (batt) 10A fuse.

For the BLUE/RED wire, if we are talking about the 6 pin white connector. The wire should go to 15A fuse (accessory). Normally the blue/red wire is tapped in between the fan motor and the interior 15A fuse box wire. NOTE: They are 2x 15A fuse for the fan motor.

EDIT: If I remember the fan motor connector have blue/red and blue/white wires. Make sure you connect the same color (blue/red wire).

[JTunedMotorsports]

Originally Posted by dwnshft2drft

The RED wire 1 pin connector goes to R/B wire 12V (batt) 10A fuse.

For the BLUE/RED wire, if we are talking about the 6 pin white connector. The wire should go to 15A fuse (accessory). Normally the blue/red wire is tapped in between the fan motor and the interior 15A fuse box wire. NOTE: They are 2x 15A fuse for the fan motor.

EDIT: If I remember the fan motor connector have blue/red and blue/white wires. Make sure you connect the same color (blue/red wire).

I will take a look but i thought based on the guides the red is 12v constant radio power and blue red to blue key on power?

[JTunedMotorsports]

Originally Posted by dwnshft2drft

The RED wire 1 pin connector goes to R/B wire 12V (batt) 10A fuse.

For the BLUE/RED wire, if we are talking about the 6 pin white connector. The wire should go to 15A fuse (accessory). Normally the blue/red wire is tapped in between the fan motor and the interior 15A fuse box wire. NOTE: They are 2x 15A fuse for the fan motor.

EDIT: If I remember the fan motor connector have blue/red and blue/white wires. Make sure you connect the same color (blue/red wire).

checked and did all the wiring used multiple guides...all wires are in.. but no blower fans are working, I am stumped.

[KAT-PWR]

Check the relays

[JTunedMotorsports]

Originally Posted by KAT-PWR

Check the relays

did that and pulled dash..any real helpful solutions from ppl who are good at wiring would help. Will pay

[rellik27]

https://m.youtube.com/watch?v=2z5_PxGAiIU part 1

https://m.youtube.com/watch?v=6l-I17kg0Sk part 2

https://m.youtube.com/watch?v=KVoftdGan9Q part 3

I used these videos to install mine and has been working for years no problem.

You can also use the blower motor relay from a j30 incase yours is messed up, also you would have to shave it down so it doesnt hit a pipe when you install it.

[JTunedMotorsports]

Originally Posted by rellik27

https://m.youtube.com/watch?v=2z5_PxGAiIU part 1

https://m.youtube.com/watch?v=6l-I17kg0Sk part 2

https://m.youtube.com/watch?v=KVoftdGan9Q part 3

I used these videos to install mine and has been working for years no problem.

watched this i need to see ppls harnesses on both us and JDM DCC how they are plug in and wire colors, I have no idea what my buddy did, but It seems he did it right based on the write ups. I changed relays, checked fuses, pwr to blower etc its def right in front of me unless its the Unit it self.

[rellik27]

Just watch it again and follow the wiring from the video on your harness to make sure it's the same way. If the wiring looks the same then its either the blower motor resistor/relay(the thing wit the metal spikes) or your fan.

[JTunedMotorsports]

Originally Posted by rellik27

Just watch it again and follow the wiring from the video on your harness to make sure it's the same way. If the wiring looks the same then its either the blower motor resistor/relay(the thing wit the metal spikes) or your fan.

there is no AC or guts in my AC box, but thanks anyways. I have a 1992 oem q45 blower resistor coming today but I don't think that is the answer im my opinion, I hope it is though lol.. The blower is fine.I jumped it to see if its working and it did. I appreciate the help..