IPS : Tons of USED EVERYTHING! Suspension/Engine/Diffs/Driveshaft/Motors/+MORE!

[bookoo]

Do you have any 5 bolt axels from a early model j30? I think that's what this diff came in?

It's going into a s13 supposedly out of a z32...I don't have much info other than that.

I apologize for the delays in response guys, I just responded to all the billions of PM's. I have been out of town and just now back into office.

Originally Posted by Srk2vane

Five lug conversions?price.
180sx front bumper? Price.
Shipped to 77053.

Sorry dont have any of that, all we have is a few s14 rear 5lug pairs.

Originally Posted by TipStylez

Z32 noise pannel, shipped to 98144. Do you also have any body parts for z32 that is oem green? There are two types of greens, a darker emerald one, pearlescent green.

$60 shipped; I believe you already spoke to carlos in my absence.

Originally Posted by GrimDrifter

Hey, I placed an order for that one but you guys canceled it because it was NOT an s15 subframe. I was told just the other day you had none. Do you know which it is? Thx

I thought we had an entire complete rearend and you purchased it, but I was incorrect and we refunded you. We do have a bare s15 rear subframe though!

Originally Posted by hollerjeet

do you have the s14 pre cat to post cat pipe?

Sorry I dont believe so sir! If you can shoot me an image of exactly what you're referring to that'd help. If you're referring to the KA setup, I do not have one. I think that's what you're referring to because I dont believe they have dual cat setups in japan on the SR's.

Originally Posted by beto300zx

How much for a clutch fan and a shroud for s13 sr20?

$40 for the shroud, $30 for the fan, and shipping for the pair will be $30. Total of $100!

Originally Posted by Es14

95' S14 Window switch shipped to 92704?

Originally Posted by oOI WEST IOo

i need rear mudflaps

We dont have any, sorry!

Originally Posted by indoz33

how much for s13 fenders (pop ups) preferably black if you have any shipped to 92707

Fenders are $100, we dont have any pair of black.. I have one side thats black and the other I think is gold. Shipping on fenders though is the killer, they're an oversized freight shipment and generally cost about $140. If you can have them sent to a business or even pickup from your local UPS hub, it'll help with the shipping cost.

Originally Posted by mau5trap

looking for s13 coupe trunk panels (left, right, center) and carpet.. do you have?!

Sorry sir we do not have any of those coupe items!

Originally Posted by 91EfSi

rear S14 5 lug spindles shipped to 67401

Do you just need the spindles or the spindles with the hubs?

Originally Posted by Sileighty_85

Any S13 Silvia OEM Front Fenders?

Sorry sir, no s13 silvia fenders left!

Originally Posted by vincepru

Still got the big brake kit?

We do have plenty of pairs of R33 calipers left!

Originally Posted by Arkitech

Looking for J30 or S14 LSD axels to work w Z32 rear end swap into my S14. Shipped to 11758.

These would be 5-bolt outputs? We have a lot of s13/s14 5-bolt axles from jdm rearends, let me know.

Originally Posted by vincepru

Still got the big brake kit?

We do have plenty of pairs of R33 calipers left!

Originally Posted by khon240sx

i'm looking for s14 5 lug hubs front and rear. silvia s13 hood, fenders, front bumper.
z32 26mm front calipers.
shipped 19082

We do have the s14 rear 5lug hubs, and we do have ONE pair of front z32 cast front calipers, I'll have to get them down to ensure they're the 26mm. Please shoot me another message if you're still interested in these items! Thanks!

Originally Posted by ryan hagen

short left side 6-star axle shaft from z32 twin turbo or a skyline(gtr?) need one bad

I dont have Z32 or GTR, but I do have r33 GTST axles that are the large single bolt 6-bolt axles. Not sure if those are the same, let me know. I have both sides!

Originally Posted by bookoo

Do you have any 5 bolt axels from a early model j30? I think that's what this diff came in?
It's going into a s13 supposedly out of a z32...I don't have much info other than that.

We have a good bit of s13 5-bolt axles out of jdm rearends, cant tell you if they're an exact bolton to the usdm z32 rearend, if you can get confirmation on that and want to snag some shoot me a pm! Thanks!

[Dany]

u have any of those fan shroulds for a ka? wat about electric window switches for a rhd?

Originally Posted by Dany

u have any of those fan shroulds for a ka? wat about electric window switches for a rhd?

We have window switches for S13 and S14, they're all RHD.
I dont have any KA fan shrouds.

[Dany]

So the rhd side will have both window switches and the passenger just one correct?

[Dany]

and how much r they?

Yessir thats how they go, price would be $50 shipped.

[Charles33579]

Assuming these are OEM Nissan axles:

Can you PM me a price quote for just a 5-bolt driver's side axle for a S13 180sx VLSD shipped to 33579.

Also send me a quote for a complete pair of 2.

Thanks,
Charles

[Dany]

hey bro any 6 bolt vlsd's? for s13

[kouki_180]

hey that aluminum driveshaft is it for s13 non abs

[projects]

Z33 drive shaft yoke shipping internationally to New Zealand?

[w0nderbr3ad]

got any mounting brackets for s13 sr20 smic?

Originally Posted by Charles33579

Assuming these are OEM Nissan axles:
Can you PM me a price quote for just a 5-bolt driver's side axle for a S13 180sx VLSD shipped to 33579.
Also send me a quote for a complete pair of 2.

Yes, they're all used oem axles from jdm cars.
All axles run $30ea and cost about $25 for one or $40 for a pair shipping.

Originally Posted by Dany

hey bro any 6 bolt vlsd's? for s13

sorry sir all the vlsd's in s13 casings have 5-bolt axles; you could always swap output shafts.

Originally Posted by kouki_180

hey that aluminum driveshaft is it for s13 non abs

1pc aluminum driveshaft for ABS s13

Originally Posted by projects

Z33 drive shaft yoke shipping internationally to New Zealand?

we dont have any z33 items

Originally Posted by w0nderbr3ad

got any mounting brackets for s13 sr20 smic?

[ryan hagen]

if you get any more of those 6-bolt gtr axles let me know, i d buy a second pair, they will work perfect.

Originally Posted by ryan hagen

if you get any more of those 6-bolt gtr axles let me know, i d buy a second pair, they will work perfect.

I have another pair that're labeled R33 GTST... maybe they just got labeled wrong or are the exact same sizing etc; lmk!

[Dany]

How much for the 5 bolt s13 vlsd's then?

[Creizai]

STill have 5 lug (s14) front? if so $$?

ALL PMs REPLIED TO!
Sorry for the delay guys been out of town at an event!

[boricuas13]

Red top sr20det is it any good? Looking for one for a build will you ship? If so price quote to 22150

[Dany]

u have s13 rhd interior door panels?

Hey guys I'm not longer working at IPS had to focus on some of my own stuff; they should have the items mentioned above. You can get ahold of Carlos via phone at 901-209-0853 or [email protected] Also he has a username on Zilvia as 'Carlos@IPS' and shoot him a PM! Phone call or email would be best means of contact though most likely! Thanks!~

[kruked]

OP still around? R33 e-brake cables?

[want2drag]

Donu still have the s14 rhd firewall cut ? I woukd like everything to do the swap. Wiring also if u have it.