MA s15 Helical diff in s13 Pumpkin

[ichibans13.5]

S15 Helical Rear Diff with brand new Output shafts installed and Shimmed with backlash set by DSG (dent sport garage) then the rear cover was slighty polished, a new oem rear diff gasket was intalled and filled with motul fluid. I got around $850 into this.

For Sale picked up in Worcester MA $550 firm - will consider shipping secondly if you pay for shipping and the cost to make a wooden crate.

[poziden]

what do i need to install this in an s14? how much for shipping/wooden crate?

[jdmchuckiwill]

how is the lock up on this diff?
ive never seen this before

[azndummie]

should fit on s14 fine, it locks up awesome for grip driving. i have one on my s14

[ichibans13.5]

Originally Posted by jdmchuckiwill

how is the lock up on this diff?
ive never seen this before

thanks azndummie - yes the lock is perfect fro grip driving- it is torque sensitive so it locks based on torque from the driveshaft- if your looking to specifically drift a clutch style would be better for you

[JRas]

Originally Posted by poziden

what do i need to install this in an s14? how much for shipping/wooden crate?

it bolts in, I used some washers to space out the front though, because the s14 "ears" seemed to have more space in between.

Originally Posted by jdmchuckiwill

how is the lock up on this diff?
ive never seen this before

it isn't a locking type differential, judging from your username it's outa your league

Originally Posted by azndummie

should fit on s14 fine, it locks up awesome for grip driving. i have one on my s14

again it doesn't lock

Originally Posted by ichibans13.5

thanks azndummie - yes the lock is perfect fro grip driving- it is torque sensitive so it locks based on torque from the driveshaft- if your looking to specifically drift a clutch style would be better for you

doesn't lock, it is good for grip though.

not good for drift, better luck getting a welded or a 2-way clutch

[nzmoman]

Originally Posted by poziden

what do i need to install this in an s14? how much for shipping/wooden crate?

I put 6 1/2 inch washers on each side (3 on top three on bottom) you also need to put your S14 rear cover on it. I just did it. some of the best money I have ever spent on my car and it will last forever. $550 for a professionally installed unit isn't bad.

OP.
Mine was shipped in three boxes with foam and bubble wrap. It takes alot to damage them. Just make sure you protect the rear cover because its aluminum

[ichibans13.5]

thanks for clarification JRas and shipping tips nzmoman!

[Tenchuu]

I have one on my S13. all you need to put it on is a S14 or Z32 rear dif cover. you don't need any washers if you don't want to. it will bolt up just fine.

[Syncade]

Im interested. Do you have reciepts from that shop?

[ichibans13.5]

no but you can certainly call them up - DSG - DENT Sport Garage - Self Built. A sport garage in Norwood, MA. USA
talk to bill or alex and tell them pierre's buddy derek

[ichibans13.5]

bump it up

[Charles33579]

This still available?

[ichibans13.5]

charles yes it is!