|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
01-18-2011, 01:50 AM | #1 |
Zilvia Junkie
Join Date: Mar 2010
Location: Granada Hills, CA
Posts: 461
Trader Rating: (6)
Feedback Score: 6 reviews
|
Brake Setup Helllp!!!
Bought a pair of JDM Project MU drilled & slotted front Rotors
was told by Mackin industries Rep they are for a 180sx -researched into what calipers i can use..was thinking 180sx calipers & maxima pads Issue is Rotor is wayy too big for 180/maxima caliper which is 22mm..the rotor is 28mm thick & the diameter looks about 280mm. WHAT CALIPERS CAN I USE for this.. the width of the rotor is right n between a NA z32 (26mm) and a TT Z32 (30mm) Please Help so i can get what i need |
Sponsored Links |
01-18-2011, 01:54 AM | #3 |
Nissanaholic!
Join Date: Jun 2008
Location: NoVA
Age: 37
Posts: 1,711
Trader Rating: (23)
Feedback Score: 23 reviews
|
i would imagine you can get away with the ttz32. i mean, brake pads are meant to open and close as the pads get smaller, so if they start off a little closer then normal (if you were using the ttz32 rotor) i don't see that being an issue. just make sure they are fitted and bleed properly.
it shouldn't matter. the calipers are bolting to the spindles, so iirc they don't have anything to do with 4/5 lug. wait i'm positive they don't i've seen 4 luggers rocking z32 brakes. |
01-18-2011, 02:49 AM | #4 |
Zilvia Junkie
Join Date: Mar 2010
Location: Granada Hills, CA
Posts: 461
Trader Rating: (6)
Feedback Score: 6 reviews
|
Gotchaa but i meant as far as doing the complete z32 setup w/ calipers/rotors..on threads where people asked about 180sx setup..most people just say go z32..neway thx for the input
|
01-18-2011, 10:23 AM | #6 |
Zilvia Junkie
Join Date: Mar 2010
Location: Granada Hills, CA
Posts: 461
Trader Rating: (6)
Feedback Score: 6 reviews
|
I dont Im at work right now..you can check them out here SCR Pure Plus SD624
-they also have only the rears for s13 @ enjuku but..im startin to think maybe i recvd the wrong ones..none of the nissan applications for that rotor state 28mm thickness on their website.. |
Bookmarks |
Tags |
180sx, brake, caliper |
|
|