S13 with rb25det help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ronnieboy19 · 03-09-2018, 07:19 PM

So i got everything reconnected using wiringspecialtie for the s13 to rb25det s2 ,today went to try starting it for the first time, it cranks but doesn't turn over.
i thought maybe that the fuel pump wasn't getting enough voltage since its a walbro 255 , so i ended up hard wiring the pump with painless performance fuel pump relay kit and still no turn over. I checked my grounds and all but so lost now and losing patience so if anyone that has experience with this problem and could give some answers or tips that be great ,thanks

feito · 03-09-2018, 07:20 PM

cranking and turning over's the same thing.
eta: you gotta start with the basics

nisileighty · 03-09-2018, 07:20 PM

Is your ECU getting power? My SR has the same problem when I first did the swap because my ecu was damaged, but not enough power at the ECU can cause the same problem

Pull the ecu covers off and check for burn marks/water damage and use a multimeter to see if it’s getting enough power.

ronnieboy19 · 03-09-2018, 07:25 PM

Sweet ill check it out soon thanks a ton

03-09-2018, 07:19 PM	#1
ronnieboy19 Join Date: May 2017 Location: thornton colorado Age: 36 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	S13 with rb25det help So i got everything reconnected using wiringspecialtie for the s13 to rb25det s2 ,today went to try starting it for the first time, it cranks but doesn't turn over. i thought maybe that the fuel pump wasn't getting enough voltage since its a walbro 255 , so i ended up hard wiring the pump with painless performance fuel pump relay kit and still no turn over. I checked my grounds and all but so lost now and losing patience so if anyone that has experience with this problem and could give some answers or tips that be great ,thanks

03-09-2018, 07:20 PM	#2
feito Nissanaholic! Join Date: May 2007 Location: Texas Posts: 1,999 Trader Rating: (1) Feedback Score: 1 reviews	cranking and turning over's the same thing. eta: you gotta start with the basics __________________ Tuners are big bullies

03-09-2018, 07:20 PM	#3
nisileighty Zilvia FREAK! Join Date: Feb 2016 Location: Seattle, WA Posts: 1,218 Trader Rating: (4) Feedback Score: 4 reviews	S13 with rb25det help Is your ECU getting power? My SR has the same problem when I first did the swap because my ecu was damaged, but not enough power at the ECU can cause the same problem Pull the ecu covers off and check for burn marks/water damage and use a multimeter to see if it’s getting enough power.

03-09-2018, 07:25 PM	#4
ronnieboy19 Join Date: May 2017 Location: thornton colorado Age: 36 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Sweet ill check it out soon thanks a ton