CA S13 & KA-T items (DOC Race/Comp Turbo/AMS/Precision/BC)

[Slims]

I have a few items remaining from my part out. I am in the Northern area of SoCal

all items have about 800 miles on them so prices are negotiable, but think before you try to low ball something. I am only selling these items because i changed platforms and engines and these are not the optimal items needed for the build. everything is in perfect working order, so...

Turbo - $1200 (Comp Turbo CT3-6062 .82 AR - t3/t4 this is an oilless turbo!, it uses a grease packing and 3 sets of ceramic ball bearings, meaning the rotational load is lighter than normal steel bearings. and ceramic has naturally less friction and is more resistant to heat damage. it is a billet compressor, a v band exhaust housing with a 3" inlet and 2" out. this is the equivalent to a Garrett GTX35R but uses no oil and spools faster, read up on the technology and you'll see this is a deal. i payed $2400 new.)

KA Turbo manifold - SOLD (DOC Race manifold. it has a 44mm WG flange. this things are bomber proof. on par with Full Race manifolds.)

(Injectors sold, AMS top feed rail - $120) (Precision Top Feed 880 injectors good for 550 on pump gas. this was a set from AMS when they still made kits for the 240sx. it will include their fuel rail and mounting hardware as well.)

Sealed stock KA intake - SOLD (I am more or less charging for the work and tools here. it is a fully sealed for boost intake. all lines have been cut away except for the IAC tube. all ports have been taped and bolted shut, except for a FPR vac line. will come with TB, TPS, and IACV. if you do not have the tools for this, you will spend more money doing it your self.)

Port and polished head with BC internals - SOLD (port and polished head with full set of BC internals. this head has been drilled out to fit 11mm head studs which i can supply. i also have a set of 264 BC cams that i will throw in for $150. include the cams and the head studs will come free)

Spec Clutch - $200 (Spec Stage 3 sprung clutch, not quite fully broken in yet. hold just under 400ft lbs of torque)

High Mount back door intercooler - $125 (i had this put together at a shop to match the PBM high mount setup. same size and specs, fits in front of your Rad and right under the support. )

I have numerous KA parts as well from blocks, heads, pistons, rods, and much more. PM me or text me at 805-252-9650

[Hooleeoh69]

Are you willing to sell just the cams for $150?

[Slims]

if the head sells ill let you know. i rather have the cams with me incase someone wants them with the head. find me a buyer for the head and they are yours.

[denian_cellphone]

does the intercooler come with piping or just the core?

[Slims]

Unfortunitly I had someone haggel this shit out of me for one side of the piping. I still do have the cuplings and the cold side piping what has all the accessorys welded on to it.
The price listed is for the core only. Pm me and we can work something out if you want the rest.

[Ham8urger]

throttle cable by chance? was this a swap in a datsun by chance?

[Slims]

I dont have the cable, the chassis was sold. This swap was origionally going to go be put in a datsun but I decided to put a V8 in the datsun.

[Slims]

just had some items sell, updating the list a bit. hit me up before saturday to get shipping out this week.

[Slims]

Bump, parts going out tomorrow. But somethjng and get it sent out tomorrow.

[Slims]

Headed to UPS. Thanks for the sales so far.

[Hooleeoh69]

Originally Posted by Slims

if the head sells ill let you know. i rather have the cams with me incase someone wants them with the head. find me a buyer for the head and they are yours.

Sounds good. Thanks

[Slims]

I am sorry Hooleeoh, the cams have gone with the head. that goes for the 11mm studs as well.

[Slims]

I can ship first thing in the morning. Hit me up for parts.

[Slims]

headed to UPS in about an hour. last chance for the week.

[Slims]

Up. Lets get stuff sold.

[Slims]

early black Friday deals?! today and tomorrow only, get the turbo for $1050, and the DOC manifold for $450! last until friday night at midnight!

[unhealer]

freebump! ima bookmark this so whenever i can afford this ill find it quick

if not sold by that time already

[JoeyTheKid]

Is the DOC a twin scroll like the full race?

[Exiled 240]

Thanks for the injectors bud. free bump and feed back coming your way

[Slims]

Taking this to the top. Didnt get your black friday deals? Come and get em here.

[Slims]

Originally Posted by JoeyTheKid

Is the DOC a twin scroll like the full race?

You have to custom order a ka twin scroll from him. He only does t3 and vband for his KA manifolds. But he does do twin for most of his other mani.

[Rusolena]

Is this intake for S13 or S14? Let me know. Thanks.

[Slims]

Title. S13.

[shift_down]

Will this mani clear AC and Power steering?

[Slims]

It clears power steering, not AC. Youre going to be hard pressed to find any quality manifold that allows AC.

[shift_down]

Originally Posted by Slims

It clears power steering, not AC. Youre going to be hard pressed to find any quality manifold that allows AC.

You are right about that, I've been looking for a while now. Until then, I will just run with my cast mani.
Thanks though.

[Slims]

Np, good luck in the search.

[Slims]

manifold is sold, and updated some prices. lets get this stuff gone.

[Slims]

lets get this stuff gone. hit it up.

[Slims]

updated with some other things sold. bump for the rest