FL Work Equip 01 +0 4x114.3 & Enkei 92 Wheels 14x7 +0 4x114.3 Brand New Tires - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ashy-larry · 03-15-2013, 07:57 AM

Work Equip 01

Size: 14x7
ET: 0
PCD: 4x114.3
3 Piece Welded(Yea you can't rebuild them but they dont really need it and you'll never have a problem sealing them,yay)
Tires: Falken 512's brand new unmounted

Story and Condition: I bought all wheels as a set as a project. The works were in good physical condition, just needed polished big time and cleaned up a lot which is what I focused on. No real damage such as bends and major curbage, typical used old school jdm wheel condition, lips and inner barrel edges in very decent condition, just nicks here and there no big deal. One of the two's outer barrel/lips on the step lip has "acne scars"(Best way I could describe it) you can tell in the pics which one, it's not terrible, I tried the best I could to sand it out but its there. I have all hardware including valve stems for the works.

Enkei 92's (The old skewls )

Size: 14x7
ET: Was told 0 but I cant tell on the rears but I swear it says 15, could be either. Guaranteed to be no higher
PCD: 4x114.3
Tires: Falken 512's mounted brand new never used

Story and Condition: These had lots of physical damage when I got them. I stripped them and went to work on the lips hammering them and grinding them down to be as asthetically and physically as well as possible(Inner barrel lips/edges were fine). They held air and still do, it's just i wanted to perfect them as much as possible. The hard work is done just the finishing repairs need done if wanted to make them show quality, i'd run them as is. Most of the focus was the above so if the polishing of the works wants to be achieved a tad more wetsanding and polishing is needed but once again i'd run em as is no prob.

Group Shots

Will not separate unless two buyers at same time come buy.
Think your buddy's rotas/xxrs/drags are cleaner.....Awesome go be a "baller", someone WILL appreciate these.

Price: $800 obo............OBO meaning if you truly are interested in them contact me and lets nego why you feel they're worth the obo and we'll make a deal. I just dont want to get a bunch of "Whats the lowest you'd take" bs.

THANKS!!!

tobroketobuildarealcar · 03-16-2013, 06:53 AM

Bump for some cool old skool wheels

ashy-larry · 03-18-2013, 08:34 PM

Thanks, someone should man up and rock 14's on their s chassis

ashy-larry · 03-20-2013, 07:44 AM

Be OG!!!

IF you cover shipping i'll ship(Not really wanting to but if its my only option I will) And still not wanting to split them up yet. Unless you find me a buyer for the other set or somone chimes in wanting one pair and one another.

ashy-larry · 03-22-2013, 11:03 AM

Where the OG missle ballers at?

bathsaltsamurai · 03-24-2013, 01:11 AM

Bump for Julien, super legit dude!!!

repentharlequin · 03-24-2013, 06:50 AM

This stuff makes me wish I had old school 4lug, glws.

ashy-larry · 03-26-2013, 08:44 AM

Quote:

Originally Posted by bathsaltsamurai

Bump for Julien, super legit dude!!!

Thanks bro!!! Glad to see you doing well out there in Columbus

Quote:

Originally Posted by repentharlequin

This stuff makes me wish I had old school 4lug, glws.

Indeed, thanks

bathsaltsamurai · 04-01-2013, 01:02 PM

To the top come on guys I'm surprised no ones bought these for a track car, jdm parts horde or a jdm coffee table lol

ashy-larry · 04-03-2013, 02:26 PM

Quote:

Originally Posted by bathsaltsamurai

To the top come on guys I'm surprised no ones bought these for a track car, jdm parts horde or a jdm coffee table lol

Amen! HMU ppl!!!

ashy-larry · 04-04-2013, 09:23 PM

Negotiable guys, just NO LOWBALLING!

ashy-larry · 04-12-2013, 11:47 AM

som won bai!!!

bathsaltsamurai · 05-09-2013, 06:07 PM

Still haven't sold. I guess its cooler just to run brand new xxr's like the rest of the sheep.

NJs13_1993 · 05-10-2013, 09:50 PM

I kinda want those equips. But no tires, and no enkeis, and shipped haha. Possible?

ashy-larry · 05-20-2013, 12:49 PM

John- I know right! Thanks for the bump homie, there's a guy on stanceworks that wants em but he's in Canada and the shipping is retarded, waiting to hear back from him, he wants to do $800 shipped when its $258 to ship.

NJS13- I'd prefer to sell them all together, I don't want to be stuck w/stuff and especially since its a square matching set w/virtually the same size lips i'd be dumb to separate.

I'd do $800 shipped as long as I net $700, i'm sure we could make that happen between UPS or uship.com, stuff is shipped hella cheap across the states and world on there. LMK man! Motivated seller!

thenewkidd · 05-20-2013, 06:20 PM

If these are available in two more weeks you will have a buyer! 4 good wheels for a good price!

ashy-larry · 05-21-2013, 09:34 AM

Quote:

Originally Posted by thenewkidd

If these are available in two more weeks you will have a buyer! 4 good wheels for a good price!

Okay...Just lmk if serious

I forgot to let everyone know that the tires are now mounted on the two equips with air in them

NoPistons! · 05-23-2013, 08:17 PM

Free bump for the 4 lug throwback wheels. These are hotness. Someone with refined taste will pick these up and make use of them. =D There is always ebay. =D

1gr8bar10der · 06-06-2013, 11:10 AM

Nice old school wheels. Free bump for you!

ashy-larry · 08-07-2013, 09:07 AM

bumping hoping to generate some interst since these haven't been seen on pg 1 in over 2 months. Hoping not to be "Put in time out" but if it happens o well, haven't been to active on here lately.

bathsaltsamurai · 08-09-2013, 01:03 PM

BUMP! Wow and they're still for sale. Maybe you should throw them on one of the many shells at Bo's house and I'll take the shell and wheels as a combo deal. And that coupe's hud dash, and any other goodies if I can sift through stuff and throw it in the shell lolol

AnthonyS13 · 08-13-2013, 07:13 AM

Are these available still? Where in FL are you located?

ashy-larry · 08-16-2013, 03:09 PM

John-SOunds good dude, just let us know. I'm sure he wouldn't mind getting rid doing somthing like that, idk. But thanks for the bump, i'm sick of just seeing these things sit, i want them to go to a good home. I put lots of time and effort into them, i know its hard to believe but when I got them they were gnarly.

Anthony-I'm in Crystal River, willing to meet up for gas money depending on how far away. LMK man!

bathsaltsamurai · 08-16-2013, 08:03 PM

Bump for on topic-ish idle chatter.

Yeah man idk when I'll be back in Florida if you sell before I get back I wouldn't be salty. But I would like to go to Bo's and treat it like a pull-a-part either way lol. Also looking at some GTC's in way more aggressive sizes/offsets.

ashy-larry · 08-27-2013, 07:08 AM

True, I'm not holding my breath on them selling anytime soon but if someone showed up w/cash in hand they're gone, there's another hatch i'm trying to get, out w/the old in w/the new. Boe's getting my current track s13 hatch shell. Until I get the other one we'll be tied at 4 each for current s-chassis ownership game lol. Just hmu broski!

On another note, someone buy these!!!!!

03-15-2013, 07:57 AM	#1
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	Work Equip 01 +0 4x114.3 & Enkei 92 Wheels 14x7 +0 4x114.3 Brand New Tires Work Equip 01 Size: 14x7 ET: 0 PCD: 4x114.3 3 Piece Welded(Yea you can't rebuild them but they dont really need it and you'll never have a problem sealing them,yay) Tires: Falken 512's brand new unmounted Story and Condition: I bought all wheels as a set as a project. The works were in good physical condition, just needed polished big time and cleaned up a lot which is what I focused on. No real damage such as bends and major curbage, typical used old school jdm wheel condition, lips and inner barrel edges in very decent condition, just nicks here and there no big deal. One of the two's outer barrel/lips on the step lip has "acne scars"(Best way I could describe it) you can tell in the pics which one, it's not terrible, I tried the best I could to sand it out but its there. I have all hardware including valve stems for the works. Enkei 92's (The old skewls ) Size: 14x7 ET: Was told 0 but I cant tell on the rears but I swear it says 15, could be either. Guaranteed to be no higher PCD: 4x114.3 Tires: Falken 512's mounted brand new never used Story and Condition: These had lots of physical damage when I got them. I stripped them and went to work on the lips hammering them and grinding them down to be as asthetically and physically as well as possible(Inner barrel lips/edges were fine). They held air and still do, it's just i wanted to perfect them as much as possible. The hard work is done just the finishing repairs need done if wanted to make them show quality, i'd run them as is. Most of the focus was the above so if the polishing of the works wants to be achieved a tad more wetsanding and polishing is needed but once again i'd run em as is no prob. Group Shots Will not separate unless two buyers at same time come buy. Think your buddy's rotas/xxrs/drags are cleaner.....Awesome go be a "baller", someone WILL appreciate these. Price: $800 obo............OBO meaning if you truly are interested in them contact me and lets nego why you feel they're worth the obo and we'll make a deal. I just dont want to get a bunch of "Whats the lowest you'd take" bs. THANKS!!! __________________

03-18-2013, 08:34 PM	#3
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	Thanks, someone should man up and rock 14's on their s chassis __________________

03-20-2013, 07:44 AM	#4
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	Be OG!!! IF you cover shipping i'll ship(Not really wanting to but if its my only option I will) And still not wanting to split them up yet. Unless you find me a buyer for the other set or somone chimes in wanting one pair and one another. __________________

03-22-2013, 11:03 AM	#5
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	Where the OG missle ballers at? __________________

04-01-2013, 01:02 PM	#9
bathsaltsamurai Leaky Injector Join Date: Sep 2012 Location: Columbus, OH Age: 37 Posts: 138 Trader Rating: (7) Feedback Score: 7 reviews	To the top come on guys I'm surprised no ones bought these for a track car, jdm parts horde or a jdm coffee table lol __________________ Haters gonna hate

03-16-2013, 06:53 AM	#2
tobroketobuildarealcar Zilvia Junkie Join Date: Feb 2013 Location: Florida Posts: 508 Trader Rating: (0) Feedback Score: 0 reviews	Bump for some cool old skool wheels

03-24-2013, 01:11 AM	#6
bathsaltsamurai Leaky Injector Join Date: Sep 2012 Location: Columbus, OH Age: 37 Posts: 138 Trader Rating: (7) Feedback Score: 7 reviews	Bump for Julien, super legit dude!!!

03-24-2013, 06:50 AM	#7
repentharlequin Zilvia Member Join Date: May 2009 Location: sarasota Age: 43 Posts: 242 Trader Rating: (0) Feedback Score: 0 reviews	This stuff makes me wish I had old school 4lug, glws.

04-04-2013, 09:23 PM	#11
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	Negotiable guys, just NO LOWBALLING! __________________

04-12-2013, 11:47 AM	#12
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	som won bai!!! __________________

05-09-2013, 06:07 PM	#13
bathsaltsamurai Leaky Injector Join Date: Sep 2012 Location: Columbus, OH Age: 37 Posts: 138 Trader Rating: (7) Feedback Score: 7 reviews	Still haven't sold. I guess its cooler just to run brand new xxr's like the rest of the sheep. __________________ Haters gonna hate

05-20-2013, 12:49 PM	#15
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	John- I know right! Thanks for the bump homie, there's a guy on stanceworks that wants em but he's in Canada and the shipping is retarded, waiting to hear back from him, he wants to do $800 shipped when its $258 to ship. NJS13- I'd prefer to sell them all together, I don't want to be stuck w/stuff and especially since its a square matching set w/virtually the same size lips i'd be dumb to separate. I'd do $800 shipped as long as I net $700, i'm sure we could make that happen between UPS or uship.com, stuff is shipped hella cheap across the states and world on there. LMK man! Motivated seller! __________________

05-20-2013, 06:20 PM	#16
thenewkidd Join Date: Jan 2011 Location: North Fontana Age: 30 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	If these are available in two more weeks you will have a buyer! 4 good wheels for a good price!

05-23-2013, 08:17 PM	#18
NoPistons! Zilvia Junkie Join Date: Jan 2009 Location: Carolina Posts: 548 Trader Rating: (1) Feedback Score: 1 reviews	Free bump for the 4 lug throwback wheels. These are hotness. Someone with refined taste will pick these up and make use of them. =D There is always ebay. =D __________________ Just another broke ass drifter

06-06-2013, 11:10 AM	#19
1gr8bar10der Post Whore! Join Date: Aug 2009 Location: Tampa/Bangkok Posts: 3,431 Trader Rating: (77) Feedback Score: 77 reviews	Nice old school wheels. Free bump for you!

08-07-2013, 09:07 AM	#20
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	bumping hoping to generate some interst since these haven't been seen on pg 1 in over 2 months. Hoping not to be "Put in time out" but if it happens o well, haven't been to active on here lately. __________________

08-09-2013, 01:03 PM	#21
bathsaltsamurai Leaky Injector Join Date: Sep 2012 Location: Columbus, OH Age: 37 Posts: 138 Trader Rating: (7) Feedback Score: 7 reviews	BUMP! Wow and they're still for sale. Maybe you should throw them on one of the many shells at Bo's house and I'll take the shell and wheels as a combo deal. And that coupe's hud dash, and any other goodies if I can sift through stuff and throw it in the shell lolol __________________ Haters gonna hate

08-13-2013, 07:13 AM	#22
AnthonyS13 Join Date: Jan 2012 Location: florida Age: 32 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Are these available still? Where in FL are you located?

08-16-2013, 03:09 PM	#23
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	John-SOunds good dude, just let us know. I'm sure he wouldn't mind getting rid doing somthing like that, idk. But thanks for the bump, i'm sick of just seeing these things sit, i want them to go to a good home. I put lots of time and effort into them, i know its hard to believe but when I got them they were gnarly. Anthony-I'm in Crystal River, willing to meet up for gas money depending on how far away. LMK man! __________________

08-16-2013, 08:03 PM	#24
bathsaltsamurai Leaky Injector Join Date: Sep 2012 Location: Columbus, OH Age: 37 Posts: 138 Trader Rating: (7) Feedback Score: 7 reviews	Bump for on topic-ish idle chatter. Yeah man idk when I'll be back in Florida if you sell before I get back I wouldn't be salty. But I would like to go to Bo's and treat it like a pull-a-part either way lol. Also looking at some GTC's in way more aggressive sizes/offsets. __________________ Haters gonna hate

08-27-2013, 07:08 AM	#25
ashy-larry Zilvia Member Join Date: Jun 2008 Location: FL Age: 35 Posts: 258 Trader Rating: (11) Feedback Score: 11 reviews	True, I'm not holding my breath on them selling anytime soon but if someone showed up w/cash in hand they're gone, there's another hatch i'm trying to get, out w/the old in w/the new. Boe's getting my current track s13 hatch shell. Until I get the other one we'll be tied at 4 each for current s-chassis ownership game lol. Just hmu broski! On another note, someone buy these!!!!! __________________