AZ Complete SR Swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MeanS14 · 01-20-2014, 11:15 AM

I have decided I don’t need 3 built SR’s so I am getting rid of my complete spare set up. The entire engine has just been resealed top to bottom (head gasket, front and rear main seals, oil pans, valve cover, etc. etc.) with an OEM Nissan gasket kit and Nissan silicone. Also, all hoses and hose clamps under the intake manifold have been replaced and are brand new.

-Brain Crower Stage 3 cams (272/272)
-Brian Crower valve springs and Ti retainers
-3 angle valve job
-New valve stem seals and resurfaced valves
-Brand new ARP head studs
-Brand new Apexi 1.1mm head gasket
-New OEM Nissan water pump
-Nismo thermostat
-Greddy pulley set (Blue)
-New oil filter
-S14 oil pick up
-New exhaust manifold studs and nuts
-Greddy Intake Manifold
-Multi-layer metal exhaust manifold gasket
-Peak Performance thermal intake gasket
-5 speed sr trans w/ clutch fork, throw out bearing, shifter, and clutch slave cylinder still intact
-Precision 5252e turbo (Brand NEW)
-Schedule 40 top mount tubular manifold (Street or Strip Performance)
BNIB Mishimoto alum radiator
BNIB Mishimoto alum fan shroud w/ dual fans
BNIB power lab front mount intercooler core
BNIB Megan Racing mount set (motor and trans)
BNIB Walbro 255lph fuel pump
ACT 6 puck clutch and ACT flyweel
Greddy oil catch can
Greddy airnix filter
Grex (Greddy) oil filter relocation kit
Aluminum coolant overflow tank
Samco radiator hoses w/ Greddy water temp sensor adapter
Z32 MAF
Stainless BMC heat shield
Boost and Air/Fuel gauge in A-pillar pod
Battery relocation kit
Enthalpy tuned SR (62) ECU
-Tuned for 740cc injectors, z32 MAF, and 5252e or GT3071r turbo on 18psi
Turbo Elements 3” exhaust w/ HKS Hyper Ti Muffler
Full-Race turbo outlet/downpipe
Nismo 740cc injectors
Aluminum blue anodized fuel rail
Sr wiring harness

The crank pulley and engine harness are not pictured but are included. All hardware is included as well (flywheel bolts, pressure plate bolts, and bellhousing bolts)

Price: $6000

Pics:

StanleySteezer · 01-24-2014, 11:14 PM

Would you take 4k?

StanleySteezer · 01-25-2014, 08:44 AM

Willing to take 4k for it?

MeanS14 · 01-26-2014, 10:42 AM

Quote:

Originally Posted by StanleySteezer

Would you take 4k?

Quote:

Originally Posted by StanleySteezer

Willing to take 4k for it?

Sorry, that's too low

MeanS14 · 04-22-2014, 09:21 PM

Still have this!!

Price is OBO

thedeadking · 05-02-2014, 05:44 AM

Willing to sell the 740cc injectors?

TomBec · 05-02-2014, 05:52 AM

part radiator, fan shroud, hoses?

MeanS14 · 05-02-2014, 11:31 AM

Everything has been SOLD!!

Thanks guys

01-20-2014, 11:15 AM	#1
MeanS14 Zilvia Junkie Join Date: Sep 2008 Location: Glendale, AZ Age: 35 Posts: 478 Trader Rating: (9) Feedback Score: 9 reviews	Complete SR Swap I have decided I don’t need 3 built SR’s so I am getting rid of my complete spare set up. The entire engine has just been resealed top to bottom (head gasket, front and rear main seals, oil pans, valve cover, etc. etc.) with an OEM Nissan gasket kit and Nissan silicone. Also, all hoses and hose clamps under the intake manifold have been replaced and are brand new. -Brain Crower Stage 3 cams (272/272) -Brian Crower valve springs and Ti retainers -3 angle valve job -New valve stem seals and resurfaced valves -Brand new ARP head studs -Brand new Apexi 1.1mm head gasket -New OEM Nissan water pump -Nismo thermostat -Greddy pulley set (Blue) -New oil filter -S14 oil pick up -New exhaust manifold studs and nuts -Greddy Intake Manifold -Multi-layer metal exhaust manifold gasket -Peak Performance thermal intake gasket -5 speed sr trans w/ clutch fork, throw out bearing, shifter, and clutch slave cylinder still intact -Precision 5252e turbo (Brand NEW) -Schedule 40 top mount tubular manifold (Street or Strip Performance) BNIB Mishimoto alum radiator BNIB Mishimoto alum fan shroud w/ dual fans BNIB power lab front mount intercooler core BNIB Megan Racing mount set (motor and trans) BNIB Walbro 255lph fuel pump ACT 6 puck clutch and ACT flyweel Greddy oil catch can Greddy airnix filter Grex (Greddy) oil filter relocation kit Aluminum coolant overflow tank Samco radiator hoses w/ Greddy water temp sensor adapter Z32 MAF Stainless BMC heat shield Boost and Air/Fuel gauge in A-pillar pod Battery relocation kit Enthalpy tuned SR (62) ECU -Tuned for 740cc injectors, z32 MAF, and 5252e or GT3071r turbo on 18psi Turbo Elements 3” exhaust w/ HKS Hyper Ti Muffler Full-Race turbo outlet/downpipe Nismo 740cc injectors Aluminum blue anodized fuel rail Sr wiring harness The crank pulley and engine harness are not pictured but are included. All hardware is included as well (flywheel bolts, pressure plate bolts, and bellhousing bolts) Price: $6000 Pics: Last edited by MeanS14; 04-22-2014 at 09:19 PM..

04-22-2014, 09:21 PM	#5
MeanS14 Zilvia Junkie Join Date: Sep 2008 Location: Glendale, AZ Age: 35 Posts: 478 Trader Rating: (9) Feedback Score: 9 reviews	Still have this!! Price is OBO Last edited by MeanS14; 04-28-2014 at 02:13 AM..

01-24-2014, 11:14 PM	#2
StanleySteezer Join Date: Dec 2011 Location: Rosamond,Ca Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Would you take 4k?

01-25-2014, 08:44 AM	#3
StanleySteezer Join Date: Dec 2011 Location: Rosamond,Ca Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Willing to take 4k for it?

05-02-2014, 05:44 AM	#6
thedeadking Zilvia Member Join Date: Apr 2009 Location: NoVA Posts: 277 Trader Rating: (18) Feedback Score: 18 reviews	Willing to sell the 740cc injectors?

05-02-2014, 05:52 AM	#7
TomBec Zilvia Member Join Date: Jun 2013 Location: Hampton, VA Posts: 213 Trader Rating: (13) Feedback Score: 13 reviews	part radiator, fan shroud, hoses?

05-02-2014, 11:31 AM	#8
MeanS14 Zilvia Junkie Join Date: Sep 2008 Location: Glendale, AZ Age: 35 Posts: 478 Trader Rating: (9) Feedback Score: 9 reviews	Everything has been SOLD!! Thanks guys